rainfactor

Members
  • Posts

    29
  • Joined

  • Last visited

Everything posted by rainfactor

  1. Hello, I have had recently few power outages that turned off and on (uncleanly) my server a couple of times resulting now in the array trying to start and not being able to do so. Array starting - Mounting disks is all I get So far I have done the following: I have started the array in maintenance mode and ran xfs repair (-L and regular) on each of my disks but the problem persists, If anyone can have a glance at my diag file(s) and tell me what am I missing I would really appreciate it Thank you Diagnostics.zip
  2. Thank you for the fix. I am still unable to log in. Seeing this comes "as is" I thank the dev anyways who put time into this and make it available. I was mostly curious to try this in order to compare with Photoprism which seems to be acting up(for me anyways) Thank you again
  3. Sorry to be late to the party but what was the fix for the initial screen? Can't seem to get past the login page Thank you
  4. Like someone mentioned there seems to be a weird logging issue. I have backed up my config from my UDM pro, installed the Docker image but then after restoring the backup I can no longer log in. "Invalid username and pass". I am using the exact local user and pass that my UDM Pro is using I deleted and recreated the container few times. Not sure what the issue is. Can anyone point me to what am I doing wrong? Thank you
  5. Any chance to update this Airsonic image to v11? Thank you
  6. I have followed to the dot the install guide from here: https://github.com/tubearchivist/tubearchivist/blob/master/docs/Installation.md However.... I just found my issue I am using Brave as the default browser and that was the issue. I installed Chrome with the same config and is working perfectly THANK YOU!!!
  7. I added 2 random channels and if I click on any of them it says there are no videos but I tried with a lot of other channels. Rescan spins and spins but never finds anything.
  8. Apologize for the lack of info. Essentially after I added 2 subscriptions i have tesdrove it and went to the downloads tab and hit rescan subscriptions. I was under the impression it would be scanning the 2 channels I have added and presented me with a list of of videos it found (regardless of the scheduler). The rescan spins for a while but it stops and never finds anything. I might have done something wrong. I have restarted the container(s) a couple of times and made sure there was no error in the logs Thank you
  9. Hey guys I installed Tube Archivist I added 2 channels but when it scans it stops after few moments and never finds anything The channels are being displayed under subscription and totally have videos, There are no errors in the logs What am I doing wrong
  10. Hello, Forgive me for being thick but cannot find for the life of me the /home/${user}/iCloud/ I'm on 13.1 Mac Os and my structure is rather different Can I point this to a different folder of my choice? I have. /Users/$user/ and some stuff but not the folder structure implied above My /home is empty. Is /home the actual root of the drive or is it the folder /home ? Can anyone have mercy and point me to where I should be creating this .mounted file I truly appreciate it!
  11. Thanks to everyone that responded. I managed to get rid of it Thank you guys!!
  12. Hey guys. I have been away from the community for a while, turned on my server the other day and I updated it All good and nice but I got something that bothers me How do I get rid of the (see below) ?? I have these huge tooltips?! that cover all my screen. Is there a way to disable them? I apologize in advance if this was an obvious answer and didn't do my homework. Thank you
  13. Awesome job! Thank you! Works like a charm
  14. Oh man I got a 1030 instead but now I run into a different issue. It has a massive heatsink that won't be able to fit inside my R420 . Looking to replace it with a much more slimmer version
  15. I wouldn't mind however the R420 Pcie slot can only give 30W and that is the reason why I went with the 730 as it draws only25W
  16. I feel rather dumb now You are absolutely right. I totally missed that. Oh well....I guess will skip the Plex decoding, will use it for VM passthru only. Thank you
  17. Hello, Was wondering if a GT730 would be too old for this. I couldn't get it to do hw decoding no matter what. I have read this whole thread and tried all the various fixes suggested. The setup is : Unraid 6.9.0 RC2 on a PowerEdge R420 with a GT730 (I am limited by the power of the pcie slot), Plex container is binhex-pass, Plex does recognize my account as having a Pass under Account>> About ,the container has been updated with all the variables. See below the attached screenshots. Any advice will be appreciated. Thank you!!
  18. They do say the problem is always behind the keyboard. I did. not experience the shares issue anymore. It was usually popping up after 20.. ish hrs or so. I am suspecting a botched Nvme install that I have done. I reformatted it and it has been behaving for 2 days. Still seeing this message : sshd[14103]: error: kex_exchange_identification: Connection closed by remote host Not sure what this is. Do you still need the diagnostics zip?
  19. The PiHole container seems to be crashing and doesn't allow to connect to the gui I have been using it for a while yet the GUI refuses to connect after a day or so and the logs show this: Not sure if they are related.But If I restart the container it comes back online [31mERROR[0m[2020-12-26T14:46:52-05:00] update check failed: Get "https://update.argotunnel.com?arch=amd64&os=linux": dial tcp: lookup update.argotunnel.com on 127.0.0.11:53: read udp 127.0.0.1:57115->127.0.0.11:53: i/o timeout [31mERROR[0m[2020-12-26T14:55:09-05:00] failed to connect to an HTTPS backend "https://1.1.1.1/dns-query": failed to perform an HTTPS request: Post "https://1.1.1.1/dns-query": net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) [31mERROR[0m[2020-12-26T14:55:09-05:00] failed to connect to an HTTPS backend "https://1.1.1.1/dns-query": failed to perform an HTTPS request: Post "https://1.1.1.1/dns-query": context deadline exceeded [31mERROR[0m[2020-12-26T14:55:10-05:00] failed to connect to an HTTPS backend "https://1.1.1.1/dns-query": failed to perform an HTTPS request: Post "https://1.1.1.1/dns-query": net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) [31mERROR[0m[2020-12-26T14:55:10-05:00] failed to connect to an HTTPS backend "https://1.1.1.1/dns-query": failed to perform an HTTPS request: Post "https://1.1.1.1/dns-query": net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)
  20. sure, it doesn't do it right away. As soon as it happens I will post the zip. Thank you
  21. Hello, My shares keep disappearing somehow and upon checking the logs I have these lines: sshd[45970]: error: kex_exchange_identification: Connection closed by remote host kernel: shfs[17370]: segfault at 0 ip 0000000000403bd6 sp 000014ca9b9fb930 error 4 in shfs[403000+c000] I have not attempted to ssh and the server is not Internet facing. I have only one nextcloud container running through swag which I believe it is secure enough The only way to remedy this is by rebooting the whole server. Does anyone have any clue what this is about and how can I stop it from happening? Thank you
  22. Hello, Anyone attempted to install an NvME for cache on a Poweredge420? Got WD 1TB and attempted to install it yet can't get it to be recognized for the life of me. Tried both Pcie slots and nothing
  23. Amazing little container this Pihole. Works like a charm and I have it set up as my 2ndary DNS in case of a fail of my first one. Planning to do an HA Pihole. There are few tutorials out there. Seems to be in its infancy but it looks promising. Any chance to update the container with the latest WebInterface and FTL? I really appreciate your time for making this available to all of us. Cheers PS: Also noticed that seems to be crashing sometimes. Not sure but I believe cloudflared is the culprit
  24. Found the solution to my 1st problem. Enabled the HSTS in the default.conf in Nginx and not in ssl.conf like I thought. Everything is green now. Still trying to figure out where are the timezone settings in Nextcloud