DonNico

Members
  • Posts

    17
  • Joined

  • Last visited

DonNico's Achievements

Noob

Noob (1/14)

0

Reputation

  1. Hi, I just ordered the recommended 6-port controller you posted. I hope i can 1:1 replace it... Nico
  2. Hello again! So i just checked if can access my server over webinterface. For now it ist reachable! So i have to wait until the issue happens again. Then i will post the whole dump again! @JorgeB How can i connect 5 Drives to 2 2-port controllers? Each Drive ist connenctet to one SATA port. I didn't split a SATA port to connect two drives to one port... Nico
  3. Hallo! Wo finde ich diese Einstellung? Was ich aber nicht verstehe. Diese Einstellung war ja schon vorhanden bevor ich die 2 weiteren HDD's eingebaut hatte. Da hatte ich das Thema nicht mehr auf die Konsole zugreifen zu können noch nicht gehabt... Nico
  4. Hallo! Ja habe ich jetzt! Anbei der Dump! Der Fehler ist Heute Abend noch nicht aufgetreten! unraid-diagnostics-20221110-1651.zip
  5. Hello! I got a Asrock AB350 PRO4 Mainboard! There are 6 SATA Ports Onboard and the 4-port PCI-E controller There is no Backplate or anyting alse build in there. All is mountet in that case here. I think i will buy this rcommended 6-port controller. If i do so, can i 1:1 change it to the new one, or must something changed in the config before? Nico
  6. Hello again! Soo i hope the Diagnostics dump helps... Or should i wait until the problem occurs and then make the dump? I got this controller in my server... Nico unraid-diagnostics-20221110-1651.zip
  7. Yes i am using the 6 SATA ports from the mainbord and 3 of the 4 SATA ports of a PCIE SATA controller...
  8. Hello! Ok i will do that... The errors in the parity drive log, what do they mean? Are these harddrive errors or ist something wrong with the SATA cable or controller? Thanks
  9. Hello, everyone! I'm having a rather strange problem with my server. I added 2x 8Tb HDD's a few days ago and precleared them. To upgrade my array from 24TB to 36TB! When that was done without errors, I exchanged my 4TB parity disk for the 8TB. After 20 hours when the new parity disk was ready, I integrated the former parity disk and the 2nd 8TB as data disks. After several hours it was done and all 8 data disks + parity were apparently running and I could access my shares! 2 days later I wanted to access 192.168.178.111 via the web interface but nothing worked. At first I thought the server might be off, so off to the basement and have a look. The server was up and the disks too, but I couldn't access it - the shares where accessable, by the way! So I pressed the reset button and booted the server! After about 2 minutes I got onto the server as usual via the web interface and the shares worked too! Hmm unusual, I thought to myself... About 2 hours later, the same thing again. I can't get onto the server even though it's on. Ping to 192.168.178.111. Funnily enough, I get to the UNBALANCE page of the unraid server via 192.168.178.111:6237! I looked at all the disk logs and all but one (Parity) have no errors! I've attached the syslog and the log from the parity disk! Before the HDD expansion, the server ran stably for over 180 days and now it's bitching around...^^ I would like to thank you for your tips! Nico syslog.txt Logfile_parity_disk.txt
  10. Hallo zusammen! Ich habe ein ziemlich eigenartiges Problem mit meinem Server. Ich habe vor einigen Tagen 2x 8Tb HDD's hinzugefügt und diese pregecleart. Um mein Array von 24TB auf 36TB aufzurüsten! Als das dann ohne Fehler fertig war, habe ich meine 4TB Parity Disk gegen die 8TB ausgewechselt. Nach 20h als die neue Parity Disk fertig war habe ich die ehemalige Parity Disk und die 2te 8TB als Datenplatten eingebunden. Nach etlichen Stunden war es dann geschafft und alle 8 Datenplatten + Parity liefen augenscheinlich und ich konnte auf meine Shares zugreifen! 2 Tage später wolle ich via Web Interface auf die 192.168.178.111 zugreifen aber nix ging. Da dachte ich zuerst der Server ist ggf. aus, also ab in den Keller und nachgesehen. Der Server war an die Platten ansch. auch aber ich konnte nicht zugreifen - auf die Shares übrigens auch nicht! Also habe ich den Reset Knopf gedrückt und das teil gebootet! Nach ca. 2 Minuten kam ich dann ganz normal via Webinterface auf den Server drauf und die Shares gingen auch! Hmm ungewöhnlich dachte ich mir... Ca. 2h Später das gleiche wieder. Ich komme nicht auf den Server drauf obwohl er an ist. Ping auf die 192.168.178.111 geht. Lustiger weise komme ich über die 192.168.178.111:6237 auf die UNBALANCE Seite des Unraid Servers! Ich habe mal alle Plattenlogs angesehen und alle bis auf eine (Parity) haben keine Fehler! ich habe mal das Syslog und das Log von der parity Platte angehangen! Der Server lief vor dem HDD Erweiterung über 180 Tage stabil durch und nun zickt er rum...^^ Ich sag jetzt schon mal Danke für Eure Tips! Nico Logfile_parity_disk.txt syslog.txt
  11. Hello Frank! Instead of the onboard controller? Is that controller faster than the onboad one? Domenico
  12. Hello again! Many thanks for the help! Domenico
  13. Hello again! so i took the second SSD out of the M.2 Slot and now i got 2 additional drives under unassigned devices! I will buy a PCE to m.2 Adapter and put the second SSD on it. In wich PCI 1x slot should i put the PCIE card, to avoid a second init error? Many Thanks for the fast help! Domenico
  14. Hello! Hmm OK here it is... With the trial license, there was a message "too many drives..." Thanks for your help unraid-diagnostics-20210104-1851.zip
  15. Hello! My 512gb Cache SSD ist filled up and if the mover would work the SSD should have mor disk space on it right? rgds Domenico unraid-diagnostics-20210104-1851.zip