Zappmax

/boot is there but empty. Meanwhile i changed flashdrive so the services are back into business. the thumbdrive was already 2 years old, so i put another one into the box. thx so far.

i have a new thumbdrive, is there a procedure how to create a new drive and do a full restore from unraid net ? rootfs 7.8G 192M 7.6G 3% / devtmpfs 7.8G 0 7.8G 0% /dev none 192k 38k 150k 20% /sys/firmware/efi/efivars tmpfs 128M 332K 128M 1% /run /dev/sdb1 3.8G 2G 1.8G 54% /boot overlay 7.8G 192M 7.6G 3% /usr overlay 7.8G 192M 7.6G 3% /lib tmpfs 128M 264K 128M 1% /var/log tmpfs 7.8G 0 7.8G 0% /dev/shm

i am confused, if i boot the device and get my unraid linux prompt where is this linux coming from, isn't it booting from this stick?

Hi Jorge, ssh into the server seems not to be configured, so i ran the diagnostics on console. It says at the end /boot/logs/tower-diagistics-yxz.zip created but the are no files an there is no /boot/log directory only an empty /boot BR Tom

Hi, i have a LincstationN1 with official Basic license. After a reboot there is no unraid web gui anymore not via ethernet not with hdmi conncetion. Normal boot in console and graphical mode shows prompt and the used ip. If i check within terminal the syslog it shows a couple of "LincstationN1 kernel: FAT-fs (SDA1) Directory bread (block yxz) failed. Is SDA1 the internal flash drive? how can i test this? How can i recover? Thx for any help. BR and happy new year Tom

Hi, i have a small office ups for 2 unraid servers. The ups has one usb connection to one of them. This ups is detected by this server via the hut software. So my question is can the second server somehow controlled via the first server in any case of power outage even whitout having the usb connection? Thx for answers.

Thanks @Iceman1199 this solved it, it may took some time

Hi, i got this errormessage , i am running 6.11.5 and i dont know what to do or check

Hi, i finally restartet the server and my Dockers and VM's are back. It might be an issue because my 500G Chache ssd's are full. After restart it was not read only anymore and i could delete some files. I dont know up till now what is the problem. It might be a problem mit "duplicati" as docker container. Duplicati stores in appdate a lot of 1.54Gb files and i dont know why but because of Cache=prefer for appdata the cache runs out of memory.

Hi, i have several (a lot of) files with 1.5GB they are on my cache drive and they taking more than 300G of my 500G cache. Has someone any idea whats going wrong here ? Thanks.

Hi , if i try to delete a file on the cache drive manually it says filesystem is readonly. I tried to download the diagnostic report but the creation doesnt stop.

in the logs i get many messages like this Apr 5 22:17:11 Tower move: create_parent: /mnt/cache/appdata/binhex-krusader/home/.themes/Ultimate-Maia-Blue-light/gtk-2.0/assets error: Read-only file system Apr 5 22:17:11 Tower move: file: /mnt/cache/appdata/binhex-krusader/home/.themes/Ultimate-Maia-Blue-light/gtk-2.0/assets/button-hover.png Apr 5 22:17:11 Tower move: create_parent: /mnt/cache/appdata/binhex-krusader/home/.themes/Ultimate-Maia-Blue-light/gtk-2.0/assets error: Read-only file system Apr 5 22:17:11 Tower move: file: /mnt/cache/appdata/binhex-krusader/home/.themes/Ultimate-Maia-Blue-light/gtk-2.0/assets/button-insensitive.png Apr 5 22:17:11 Tower move: create_parent: /mnt/cache/appdata/binhex-krusader/home/.themes/Ultimate-Maia-Blue-light/gtk-2.0/assets error: Read-only file system Apr 5 22:17:11 Tower move: file: /mnt/cache/appdata/binhex-krusader/home/.themes/Ultimate-Maia-Blue-light/gtk-2.0/assets/button.png Apr 5 22:17:11 Tower move: create_parent: /mnt/cache/appdata/binhex-krusader/home/.themes/Ultimate-Maia-Blue-light/gtk-2.0/assets error: Read-only file system Apr 5 22:17:11 Tower move: file: /mnt/cache/appdata/binhex-krusader/home/.themes/Ultimate-Maia-Blue-light/gtk-2.0/assets/checkbox-che

Hi, if i go to the docker Tab is get the following messages: ------------------ Warning: stream_socket_client(): unable to connect to unix:///var/run/docker.sock (Connection refused) in /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php on line 712 Couldn't create socket: [111] Connection refused Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php on line 898 Warning: stream_socket_client(): unable to connect to unix:///var/run/docker.sock (Connection refused) in /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php on line 712 Couldn't create socket: [111] Connection refused Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/dynamix.docker.manager/include/DockerClient.php on line 967 No Docker containers installed ---------------- History: I had a problem with the cachedrive it was getting full. My appdate folder was on cache prefered so i stopped docker and set it to cache yes Then i started the mover to get the cache drive more free space. Mover runs but the cachedrive in not getting empty Any hope to get docker back? Thx for any help

@dlandon thx "Passed Through" was the solution, dont know exacvtly why but it solved my problem

Hi, i hope this is the right way to ask for help. Up til now my unraid server was an no brainer. I have a external usb 2TB hdd to be used as local backup for some of my shares. I run now 6.11.2 but i gues the problem started below 6.11. I have both unassigned devices latest versions installed and destructive mode is enabled. I see the drive but in cannot mount or unmount it (no option available) it says "passed" and there is the small minus under the drie but its gray. If i press disk log information i got the following snippet. Any idea how i can "reactivate " the drive. BR Zappmax --------------------------- Nov 6 18:17:56 Tower kernel: sd 0:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) Nov 6 18:17:56 Tower kernel: sd 0:0:0:0: [sdh] Write Protect is off Nov 6 18:17:56 Tower kernel: sd 0:0:0:0: [sdh] Mode Sense: 34 00 00 00 Nov 6 18:17:56 Tower kernel: sd 0:0:0:0: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA Nov 6 18:17:56 Tower kernel: sdh: sdh1 Nov 6 18:17:56 Tower kernel: sd 0:0:0:0: [sdh] Attached SCSI disk Nov 6 18:18:27 Tower emhttpd: Hitachi_HDS722020ALA330_JK1171YAGNNYMS (sdh) 512 3907029168 Nov 6 18:18:27 Tower emhttpd: read SMART /dev/sdh Nov 6 18:33:56 Tower emhttpd: spinning down /dev/sdh Nov 6 18:34:58 Tower emhttpd: spinning up /dev/sdh Nov 6 18:34:59 Tower emhttpd: read SMART /dev/sdh -----------------------------

i copied it to the duplicati thread.

UNRAID DUPLICATI DOCKER FILLS UP APPDATA/DUPLICATI Hi, since a couple of days i got an alarm about cache drive is going to be full. It seem the appdata/duplicati folder has a lot ob big yxz.backup-ab files with most of them are 1.4GB and more . The files are older, can i delete them and why is this the case?

Hi, yes i tried to open this topic under docker application but there i cannot open any new issue, what „Icon“ do you mean?

Hi, since a couple of days i got an alarm about cache drive is going to be full. It seem the appdata/duplicati folder has a lot ob big yxz.backup-ab files with most of them are 1.4GB and more . The files are older, can i delete them and why is this the case?

Hi, do i missed something, what are the credentials?

Hallo, nur so zur Info für Leute die eine USV suchen. Habe mir, da die Cyberpower nach dem Test der c't im Preis gestiegen ist eine EATON 3S 700 DIN Gen.2 3S700D (Daten laut Lieferschein) gekauft und sie wurde von unraid auch erkannt. Allerdings zeigt die keine Nominalpower oder auch die absolute UPS Load (in Prozent aber schon) an .

Hi to all, while installing a third Ubuntu VM i got this error message. I have already 2 other VM running one based on the exact same image. i checked in the console there is no domain-7-Ubuntu 20.4.3 Serve dir underneath the qemu dir. THX. zappmax -------------------------- VM creation error internal error: process exited while connecting to monitor: 2021-09-03T12:17:21.684608Z qemu-system-x86_64: -object secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-7-Ubuntu 20.4.3 Serve/master-key.aes: Unable to read /var/lib/libvirt/qemu/domain-7-Ubuntu 20.4.3 Serve/master-key.aes: Failed to open file “/var/lib/libvirt/qemu/domain-7-Ubuntu 20.4.3 Serve/master-key.aes”: No such file or directory -----------------------------------

Hi to all, i ran into the same this issue. I did the entry like "cleggypcd" mentioned. I updated the /etc/fstab an did try to manual "mount -a" . The result is "mount: unknown filsystem type 9p" Update: The VM is a RHEL 7.3 and Cent OS 7.9 and Unraid Version is 6.8.3 Ubuntu 20.10 is working fine with the above procedure Thanks for any comments

I would request a "liferay" docker app

Hi to all, i tried to start this container, unraid docker tab says its startet. There is no web gui ond no console working. I opened the log file is says at the end "sending all processes the KILL signal and exiting." ( other dockers are running duplicati, krusader etc) I also "touched" the piaware.conf in the "piaware.conf" directory as there was a additional errormessage about the missing config file (including chown and chmod). TIn the logfile is a "Rafael Micro R820T tuner" in piaware section which is not what i use but i dont know where to edit. I did the passtrouh with lsusb an RTL2832U DVB-T original piaware stick, i did also the linking to the device path and passing to the container in the template. My device seems to be recognizet by the flightradar sw in the container but not the piaware sw. Strange to me, sorry i am not a expert just an interested user which tries to learn things with unraid, linux, docker.... Piaware and stick are working fine with an original pi. Thanks for any advise.