TUN_SD

Got the same. Nov 29 07:16:46 NAS kernel: usb 1-10: reset low-speed USB device number 2 using xhci_hcd Nov 29 07:16:46 NAS kernel: xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit Nov 29 07:16:46 NAS kernel: usb usb3: root hub lost power or was reset Nov 29 07:16:46 NAS kernel: usb usb4: root hub lost power or was reset Ideas?

Ok, the freezing I have managed with a replacement of the ram. However, I now have the problem that unraid does not properly accept my second network card. the plan is: computer and nas directly connected 10.10.10.10 to 10.10.10.11 with a 2,5tgb card each. The card is also recognized by unraid. furthermore: Router - Switch, from the switch goes the server, TV, reciever, Pihole, computer. Nas should get here a static IP, 192.168.0.162 if I disable bonding on adapter 1 (onboard NIC) in Unraid, the server no longer comes into the network. is that wrong, because I want to use explicitly from the computer the 2.5 gb for file transfer. Which setting do I have wrong here? Does bonding have to remain active?

First of all, thank you. I will follow the advice no later than the weekend. I have noticed that one hard drive, which by the way are all new, shows an error that is usually due to a faulty cable. I have exchanged this once. New ones are ordered. Since the error is displayed on the parity drive, it would explain why the computer went down tonight during the check. I will continue to monitor. Bios is already the current. Here is the hardware: [0:0:0:0]disk SanDisk Ultra 1.00 /dev/sda 15.5GB [1:0:0:0]disk ATA WDC WD40EFRX-68N 0A82 /dev/sdb 4.00TB [2:0:0:0]disk ATA WDC WD40EFRX-68N 0A82 /dev/sdc 4.00TB [3:0:0:0]disk ATA ST4000VN008-2DR1 SC60 /dev/sdd 4.00TB [4:0:0:0]disk ATA ST4000VN008-2DR1 SC60 /dev/sde 4.00TB [N:0:1:1]disk SAMSUNG MZVPV512HDGL-000H1__1 /dev/nvme0n1 512GB Ethernet controller: Intel Corporation 82574L Gigabit Network Connectio MB: ASUSTeK COMPUTER INC. PRIME H410I-PLUS Version Rev 1 CPU: Intel® Pentium® Gold G6400 CPU @ 4.00GHz Patriot Memory Viper Steel Series DDR4 8GB (2 x 4GB) 3200MHz Gaming

recently I had a lot of freezes again, even in idle. Did some tests with an ubuntu live system. No problems with Ubuntu. syslog

That is really strange, there is actually only new hardware installed. I will disassemble the thing again and put it back together. Maybe a cable is not inserted correctly somewhere or something like that. Thanks again for looking over.

Here we go.. syslog

Yes, I give it a try. Thank you in advance.

My unraid server freezes all the time. It runs for a few hours, then suddenly freezes, sometimes while streaming with plex, today just idle. After the crash the usb stick is no longer bootable. Kernel panic, unable to mount root fs.... What data can I provide to help find the cause? nas-diagnostics-20210122-1746.zip