Carl749862

Hi, I'm trying to do a rsnapshot backup of an unraid share to a backup disk setup as a pool device. It seems to get terminated after 3 hours each time. Any clues as to what could be doing this? I'm new to this so could be an error in config and crontab so included those. Thanks, Carl [2022-10-17T00:00:00] /usr/bin/rsnapshot beta: started [2022-10-17T00:00:00] echo 221 > /var/run/rsnapshot.pid [2022-10-17T00:00:00] mkdir -m 0755 -p /.snapshots/beta.0/localhost/ [2022-10-17T00:00:07] /usr/bin/rsync -a --delete --numeric-ids --relative --delete-excluded /data/Carl/ /.snapshots/beta.0/localhost/Carl [2022-10-17T03:00:05] /usr/bin/rsnapshot beta: ERROR: rsnapshot was sent TERM signal... cleaning up [2022-10-17T03:00:05] rm -f /var/run/rsnapshot.pid # do daily/weekly/monthly maintenance # min hour day month weekday command */15 * * * * run-parts /etc/periodic/15min 0 * * * * run-parts /etc/periodic/hourly 0 2 * * * run-parts /etc/periodic/daily 0 3 * * 6 run-parts /etc/periodic/weekly 0 5 1 * * run-parts /etc/periodic/monthly # rsnapshot examples 00 00 * * * rsnapshot beta 00 23 * * 6 rsnapshot gamma 00 22 1 * * rsnapshot delta ################################################# # rsnapshot.conf - rsnapshot configuration file # ################################################# # # # PLEASE BE AWARE OF THE FOLLOWING RULE: # # # # This file requires tabs between elements # # # ################################################# ####################### # CONFIG FILE VERSION # ####################### config_version 1.2 ########################### # SNAPSHOT ROOT DIRECTORY # ########################### # All snapshots will be stored under this root directory. # snapshot_root /.snapshots/ # If no_create_root is enabled, rsnapshot will not automatically create the # snapshot_root directory. This is particularly useful if you are backing # up to removable media, such as a FireWire or USB drive. # no_create_root 1 ################################# # EXTERNAL PROGRAM DEPENDENCIES # ################################# # LINUX USERS: Be sure to uncomment "cmd_cp". This gives you extra features. # EVERYONE ELSE: Leave "cmd_cp" commented out for compatibility. # # See the README file or the man page for more details. # cmd_cp /bin/cp # uncomment this to use the rm program instead of the built-in perl routine. # cmd_rm /bin/rm # rsync must be enabled for anything to work. This is the only command that # must be enabled. # cmd_rsync /usr/bin/rsync # Uncomment this to enable remote ssh backups over rsync. # cmd_ssh /usr/bin/ssh # Comment this out to disable syslog support. # cmd_logger /usr/bin/logger # Uncomment this to specify the path to "du" for disk usage checks. # If you have an older version of "du", you may also want to check the # "du_args" parameter below. # cmd_du /usr/bin/du # Uncomment this to specify the path to rsnapshot-diff. # cmd_rsnapshot_diff /usr/bin/rsnapshot-diff # Specify the path to a script (and any optional arguments) to run right # before rsnapshot syncs files # #cmd_preexec /path/to/preexec/script # Specify the path to a script (and any optional arguments) to run right # after rsnapshot syncs files # #cmd_postexec /path/to/postexec/script # Paths to lvcreate, lvremove, mount and umount commands, for use with # Linux LVMs. # #linux_lvm_cmd_lvcreate /path/to/lvcreate #linux_lvm_cmd_lvremove /path/to/lvremove #linux_lvm_cmd_mount /bin/mount #linux_lvm_cmd_umount /bin/umount ######################################### # BACKUP LEVELS / INTERVALS # # Must be unique and in ascending order # # e.g. alpha, beta, gamma, etc. # ######################################### #retain alpha 6 retain beta 7 retain gamma 4 retain delta 3 ############################################ # GLOBAL OPTIONS # # All are optional, with sensible defaults # ############################################ # Verbose level, 1 through 5. # 1 Quiet Print fatal errors only # 2 Default Print errors and warnings only # 3 Verbose Show equivalent shell commands being executed # 4 Extra Verbose Show extra verbose information # 5 Debug mode Everything # verbose 5 # Same as "verbose" above, but controls the amount of data sent to the # logfile, if one is being used. The default is 3. # loglevel 5 # If you enable this, data will be written to the file you specify. The # amount of data written is controlled by the "loglevel" parameter. # logfile /config/rsnapshot.log # If enabled, rsnapshot will write a lockfile to prevent two instances # from running simultaneously (and messing up the snapshot_root). # If you enable this, make sure the lockfile directory is not world # writable. Otherwise anyone can prevent the program from running. # lockfile /var/run/rsnapshot.pid # By default, rsnapshot check lockfile, check if PID is running # and if not, consider lockfile as stale, then start # Enabling this stop rsnapshot if PID in lockfile is not running # #stop_on_stale_lockfile 0 # Default rsync args. All rsync commands have at least these options set. # #rsync_short_args -a #rsync_long_args --delete --numeric-ids --relative --delete-excluded # ssh has no args passed by default, but you can specify some here. # #ssh_args -p 22 # Default arguments for the "du" program (for disk space reporting). # The GNU version of "du" is preferred. See the man page for more details. # If your version of "du" doesn't support the -h flag, try -k flag instead. # #du_args -csh # If this is enabled, rsync won't span filesystem partitions within a # backup point. This essentially passes the -x option to rsync. # The default is 0 (off). # #one_fs 0 # The include and exclude parameters, if enabled, simply get passed directly # to rsync. If you have multiple include/exclude patterns, put each one on a # separate line. Please look up the --include and --exclude options in the # rsync man page for more details on how to specify file name patterns. # #include ??? #include ??? #exclude ??? #exclude ??? # The include_file and exclude_file parameters, if enabled, simply get # passed directly to rsync. Please look up the --include-from and # --exclude-from options in the rsync man page for more details. # #include_file /path/to/include/file #exclude_file /path/to/exclude/file # If your version of rsync supports --link-dest, consider enabling this. # This is the best way to support special files (FIFOs, etc) cross-platform. # The default is 0 (off). # link_dest 1 # When sync_first is enabled, it changes the default behaviour of rsnapshot. # Normally, when rsnapshot is called with its lowest interval # (i.e.: "rsnapshot alpha"), it will sync files AND rotate the lowest # intervals. With sync_first enabled, "rsnapshot sync" handles the file sync, # and all interval calls simply rotate files. See the man page for more # details. The default is 0 (off). # #sync_first 0 # If enabled, rsnapshot will move the oldest directory for each interval # to [interval_name].delete, then it will remove the lockfile and delete # that directory just before it exits. The default is 0 (off). # #use_lazy_deletes 0 # Number of rsync re-tries. If you experience any network problems or # network card issues that tend to cause ssh to fail with errors like # "Corrupted MAC on input", for example, set this to a non-zero value # to have the rsync operation re-tried. # #rsync_numtries 0 # LVM parameters. Used to backup with creating lvm snapshot before backup # and removing it after. This should ensure consistency of data in some special # cases # # LVM snapshot(s) size (lvcreate --size option). # #linux_lvm_snapshotsize 100M # Name to be used when creating the LVM logical volume snapshot(s). # #linux_lvm_snapshotname rsnapshot # Path to the LVM Volume Groups. # #linux_lvm_vgpath /dev # Mount point to use to temporarily mount the snapshot(s). # #linux_lvm_mountpath /path/to/mount/lvm/snapshot/during/backup ############################### ### BACKUP POINTS / SCRIPTS ### ############################### # LOCALHOST backup /data/Carl localhost/ #backup /home/ localhost/ #backup /etc/ localhost/ #backup /usr/local/ localhost/ #backup /var/log/rsnapshot localhost/ #backup /etc/passwd localhost/ #backup /home/foo/My Documents/ localhost/ #backup /foo/bar/ localhost/ one_fs=1,rsync_short_args=-urltvpog #backup_script /usr/local/bin/backup_pgsql.sh localhost/postgres/ # You must set linux_lvm_* parameters below before using lvm snapshots #backup lvm://vg0/xen-home/ lvm-vg0/xen-home/ # EXAMPLE.COM #backup_exec /bin/date "+ backup of example.com started at %c" #backup [email protected]:/home/ example.com/ +rsync_long_args=--bwlimit=16,exclude=core #backup [email protected]:/etc/ example.com/ exclude=mtab,exclude=core #backup_exec ssh [email protected] "mysqldump -A > /var/db/dump/mysql.sql" #backup [email protected]:/var/db/dump/ example.com/ #backup_exec /bin/date "+ backup of example.com ended at %c" # CVS.SOURCEFORGE.NET #backup_script /usr/local/bin/backup_rsnapshot_cvsroot.sh rsnapshot.cvs.sourceforge.net/ # RSYNC.SAMBA.ORG #backup rsync://rsync.samba.org/rsyncftp/ rsync.samba.org/rsyncftp/