neeiro

Thanks - That seems to have got it working

ok getting this error now (tried a reboot too)... 21.08.2021 15:51:06 INFO: Creating secure mergerfs mount. mv: cannot move '/mnt/user/GMerged/secure' to '/mnt/user/Glocal/secure/secure': File exists fuse: mountpoint is not empty fuse: if you are sure this is safe, use the 'nonempty' mount option 21.08.2021 15:51:06 INFO: Checking if secure mergerfs mount created. 21.08.2021 15:51:06 CRITICAL: secure mergerfs mount failed. Stopping dockers. deleted /mnt/user/Glocal/secure/secure ran script again... 2021/08/21 16:30:43 DEBUG : 5 go routines active 21.08.2021 16:30:43 INFO: *** Creating mount for remote secure 21.08.2021 16:30:43 INFO: sleeping for 5 seconds 2021/08/21 16:30:43 NOTICE: Serving remote control on http://localhost:5572/ 2021/08/21 16:30:44 Fatal error: Can not open: /mnt/user/GDrive/secure: open /mnt/user/GDrive/secure: transport endpoint is not connected 21.08.2021 16:30:48 INFO: continuing... 21.08.2021 16:30:48 CRITICAL: secure mount failed - please check for problems. Stopping dockers

/ Is this correct now? My scripts look like this... #!/bin/bash ###################### #### Mount Script #### ###################### ## Version 0.96.9.2 ## ###################### ####### EDIT ONLY THESE SETTINGS ####### # INSTRUCTIONS # 1. Change the name of the rclone remote and shares to match your setup # 2. NOTE: enter RcloneRemoteName WITHOUT ':' # 3. Optional: include custom command and bind mount settings # 4. Optional: include extra folders in mergerfs mount # REQUIRED SETTINGS RcloneRemoteName="secure" # Name of rclone remote mount WITHOUT ':'. NOTE: Choose your encrypted remote for sensitive data RcloneMountShare="/mnt/user/GDrive" # where your rclone remote will be located without trailing slash e.g. /mnt/user/mount_rclone RcloneMountDirCacheTime="720h" # rclone dir cache time LocalFilesShare="/mnt/user/Glocal" # location of the local files and MountFolders you want to upload without trailing slash to rclone e.g. /mnt/user/local. Enter 'ignore' to disable RcloneCacheShare="/mnt/user0/GDrive" # location of rclone cache files without trailing slash e.g. /mnt/user0/mount_rclone RcloneCacheMaxSize="400G" # Maximum size of rclone cache RcloneCacheMaxAge="336h" # Maximum age of cache files MergerfsMountShare="/mnt/user/GMerged" # location without trailing slash e.g. /mnt/user/mount_mergerfs. Enter 'ignore' to disable DockerStart="nzbget plex sonarr radarr ombi" # list of dockers, separated by space, to start once mergerfs mount verified. Remember to disable AUTOSTART for dockers added in docker settings page #MountFolders=\{"downloads/complete,downloads/intermediate,downloads/seeds,movies,tv"\} # comma separated list of folders to create within the mount # Note: Again - remember to NOT use ':' in your remote name above # OPTIONAL SETTINGS # Add extra paths to mergerfs mount in addition to LocalFilesShare LocalFilesShare2="ignore" # without trailing slash e.g. /mnt/user/other__remote_mount/or_other_local_folder. Enter 'ignore' to disable LocalFilesShare3="ignore" LocalFilesShare4="ignore" I've taken out rcloneuploadremotename.. #!/bin/bash ###################### ### Upload Script #### ###################### ### Version 0.95.5 ### ###################### ####### EDIT ONLY THESE SETTINGS ####### # INSTRUCTIONS # 1. Edit the settings below to match your setup # 2. NOTE: enter RcloneRemoteName WITHOUT ':' # 3. Optional: Add additional commands or filters # 4. Optional: Use bind mount settings for potential traffic shaping/monitoring # 5. Optional: Use service accounts in your upload remote # 6. Optional: Use backup directory for rclone sync jobs # REQUIRED SETTINGS RcloneCommand="move" # choose your rclone command e.g. move, copy, sync RcloneRemoteName="secure" # Name of rclone remote mount WITHOUT ':'. RcloneUploadRemoteName="" If you have a second remote created for uploads put it here. Otherwise use the same remote as RcloneRemoteName. LocalFilesShare="/mnt/user/Glocal" # location of the local files without trailing slash you want to rclone to use RcloneMountShare="/mnt/user/GDrive" # where your rclone mount is located without trailing slash e.g. /mnt/user/mount_rclone MinimumAge="15m" # sync files suffix ms|s|m|h|d|w|M|y ModSort="ascending" # "ascending" oldest files first, "descending" newest files first # Note: Again - remember to NOT use ':' in your remote name above # Bandwidth limits: specify the desired bandwidth in kBytes/s, or use a suffix b|k|M|G. Or 'off' or '0' for unlimited. The script uses --drive-stop-on-upload-limit which stops the script if the 750GB/day limit is achieved, so you no longer have to slow 'trickle' your files all day if you don't want to e.g. could just do an unlimited job overnight. BWLimit1Time="01:00" BWLimit1="off" BWLimit2Time="08:00" BWLimit2="15M" BWLimit3Time="16:00" BWLimit3="12M" # OPTIONAL SETTINGS # Add name to upload job JobName="_daily_upload" # Adds custom string to end of checker file. Useful if you're running multiple jobs against the same remote. # Add extra commands or filters Command1="--exclude downloads/**" Command2="" Command3="" Command4="" Command5="" Command6="" Command7="" Command8=""

Thanks, I've commented out: #RcloneRemoteName="secure" # Name of rclone remote mount WITHOUT ':'. In both upload and mount script - is this correct?

Having a few problems with the script - it works ok until a rebbot happens. Main problem is it seems to be putting downloads in to /GMerged/secure/secure/downloads /GLocal/secure/secure/downloads Seems to be adding an extra secure directory? (which is messing up radarr etc)

Any help on Traccar on here? I've downloaded and set it up using traccar.xml but when I start the docker I get: Execution error Server error

Having a few teething problems with this guide: 1. On a server restart or array restart the mount it says the secure folder already exist If I delete the folder Gmerged/secure/secure its starts correctly - it seems like i've got another 'secure' folder in the secure folder - both have movies, downloads etc in them 2. Radarr and sonarr aredownloading the files ok but are not exporting them out the queue - they seem to be being put in the secure folder in the secure folder. Mount script settings are # REQUIRED SETTINGS RcloneRemoteName="secure" # Name of rclone remote mount WITHOUT ':'. NOTE: Choose your encrypted remote for sensitive data RcloneMountShare="/mnt/user/GDrive" # where your rclone remote will be located without trailing slash e.g. /mnt/user/mount_rclone RcloneMountDirCacheTime="720h" # rclone dir cache time LocalFilesShare="/mnt/user/Glocal" # location of the local files and MountFolders you want to upload without trailing slash to rclone e.g. /mnt/user/local. Enter 'ignore' to disable RcloneCacheShare="/mnt/user0/GDrive" # location of rclone cache files without trailing slash e.g. /mnt/user0/mount_rclone RcloneCacheMaxSize="400G" # Maximum size of rclone cache RcloneCacheMaxAge="336h" # Maximum age of cache files MergerfsMountShare="/mnt/user/GMerged" # location without trailing slash e.g. /mnt/user/mount_mergerfs. Enter 'ignore' to disable DockerStart="nzbget plex sonarr radarr ombi" # list of dockers, separated by space, to start once mergerfs mount verified. Remember to disable AUTOSTART for dockers added in docker settings page MountFolders=\{"downloads/complete,downloads/intermediate,downloads/seeds,movies,tv"\} # comma separated list of folders to create within the mount # Note: Again - remember to NOT use ':' in your remote name above Upload settings are RcloneCommand="move" # choose your rclone command e.g. move, copy, sync RcloneRemoteName="secure" # Name of rclone remote mount WITHOUT ':'. RcloneUploadRemoteName="secure" # If you have a second remote created for uploads put it here. Otherwise use the same remote as RcloneRemoteName. LocalFilesShare="/mnt/user/Glocal" # location of the local files without trailing slash you want to rclone to use RcloneMountShare="/mnt/user/GDrive" # where your rclone mount is located without trailing slash e.g. /mnt/user/mount_rclone MinimumAge="15m" # sync files suffix ms|s|m|h|d|w|M|y ModSort="ascending" # "ascending" oldest files first, "descending" newest files first is the setting RcloneUploadRemoteName="secure" the problem?

Thanks for letting me know - already tried it by the time the message came through. Might end up running the link through a switch - seemed a bit pointless as they are next to each other.

Single port without bonding doesn't work either - detecting cables plugged in but can't ping. I'm going to make up a crossover cable just to test - Spec sheets say both Nics can use normal cabling but I'll test it to rule it out.

Not yet - will try tomorrow and post the results

It will only let me choose active-backup (1) - If i trie to alter it it defaults back to it. Should it be on something else? Ports are showing up as up and connected in Windows team. Teams is set up with the default additional settings: Switch Independent,Dynamic, Standby:none

I have a 4 port Nic in and one in a windows server PC - Is it possible to setup team/bonds directly betweeen the 2 computers without a switch? I've tried bonding on the unraid side with ip 192.168.10.1/24 and setting up teams on the windows server with ip 192.168.10.2 but this doesn't seem to work - is it possible?

Hi - I've just recieved 2 new hard drives (8TB each) and wondering the best way to incoperate them in my server, I've only been using Unraid since the start of the year so still getting my head around it - I'm on Unraid Plus. Some of the drives are starting to get old and I would prefer to reduce the number of drives in the server. All drives have 2 backups on different servers. I use the server for for media and a few VMs so don't really want to rebuild the whole system Originally I was going to remove a 2TB, 3TB and a 3TB drive and replace it with 1 8TB and then use the second as a back up. my current setup is: Disk 1 WDC_WD20EZRX-00D8PB0_WD-WMC4M0H9WRW2 - 2 TB (sdl) Used 1.27 TB Free 726 GB Disk 2 WD1003FBYX-88_LEN_WD-WCAW30CRFVZ8 - 1 TB (sdk) Used 7 GB Free 993 GB Disk 3 TOSHIBA_DT01ABA300_13P9ULWAS - 3 TB (sdg) Used 2.06 TB Free 942 GB Disk 4 TOSHIBA_DT01ABA300_Z5OP3GBGS - 3 TB (sdh) Used 2.25 TB Free 747 GB Disk 5 WDC_WD30EFRX-68EUZN0_WD-WCC4NNSYFXPP - 3 TB (sdi) Used 1.51 TB Free 1.49 TB Disk 6 WDC_WD30EFRX-68EUZN0_WD-WCC4N0695182 - 3 TB (sdj) Used 1.30 TB Free 1.70 TB Array of six devices 15 TB Used 8.40 TB Free 6.59 TB Cache SanDisk_Ultra_II_240GB_154624442293 - 240 GB (sdf) Used 95.9 GB Free 143 GB No Parity Disk 1 4 Years Disk 2 4 Years Disk 3 7 Years Disk 4 1 Years Disk 5 5 Years Disk 6 3 Years

Quick Question - Is it possible to have 2 unraid servers using the same google account at the same time or will it cause problems? Also would you just use the same config file/scripts on each?

Just tried this myself (new unraid user) and keep losing settings, will this be fixed or is it best trying the docker?