soulskill

Here’s mine from an Sapphire R9 Nano: Custom loop (liquid cooled) hence the ‘fan1: N/A’. Wondering if we can also fetch the VMem. Temps.

I think I am a bit late to the party but fire away sire’ 🙂

@b3rs3rk Sorry was occupied like anything; Just came by to say a huge thank you! My Nano shows the temp (gpu die temp?) as well. On a side note I noticed this in unraid logs being logged around every 10 minutes (since 1st release for amd gpu support): Let me know if you need further help.

And it works! Thanks a lot @b3rs3rk! I updated the plugin >> plugin settings did show the unit/device id >> I swapped back to “change me” , saved and then back to “AMD” >> BaaM! Works out of the box. **Feature Request:** GPU Core and VMem Junction Temperature I think the temp sensor module (NCT6775) does pull up these figures.

Thanks @b3rs3rk. Just a headsup: I guess my i7 4790K’s iGPU is catalogued as Xeon’s iGPU.

Outputs: which: no nvidia-smi in (.:/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin) which: no intel_gpu_top in (.:/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin) array(0) { }

I tried to run the command - the directory and file exists but the php command is stuck. Does not outputs.

Here you go: Outputs: 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06) 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Fiji [Radeon R9 FURY / NANO Series] (rev ca)

Thanks @b3rs3rk for your contribution. Sorry to copy/past my comment but I feel the right place is here in this support thread :} - Can you recommend me the correct kernel module to enable (I know the radeontop plugin enables the amdgpu module) for my AMD Sapphire (reference design) R9 Nano GPU? - Should it be the “radeon” kernel module? Would it be a problem if I had manually enabled radeon kernel module via the officially recommended way (boot script - which is what I have already done but haven’t tried out my GPU since I setup my unraid instance) and then also install the radeontop & gpu stats plugin? **Note 1:** I did the above and the stats plugin shows N/A for all fields. Also I did select vendor in gpu stats plugin settings but unit ID list is blank. radeontop did report correct VMem (didn’t check other stats - sorry mobile terminal isn’t that nice). **Note 2:** I have since then removed my modprobe.d directory and the radeon kernel conf file. Rebooted unRAID. Still the same as reported above. Let me know what I can do to help fix it. Thanks again! (You’re our last hope for those chugging along on a radeon/AMD GPU)

Thanks @John_M ! Yep, and indeed it was ich777’s post that sparked my interest back into unraid; while 24hrs were spent on ebay’s bidding war for a decently priced nVidia GPU (for which there is absolutely none unless one goes lowfi). I’ll look into the gpu config/containers thingy over the weekend i.e. once I finish the build. Cheers!

Any eli5 to this would be nice 🙂

Thanks a lot for the update. Which module should I enable for my AMD R9 Nano (Fiji Arch.) ? Super eager to have both the Docker & simple passthrough to VM support.

Will this only work when unraid is run headless? I am looking to have a similar setup with my i7 4790K and an AMD R9 nano.

Hey there! It’s been almost 6months since I first had the idea to have an unRAID Instance. Finally I can kickoff things with this hardware: i7 4790K 16GB DDR3 1866Mhz. Dual-channel Kit (8x2) AMD R9 Nano (Sapphire/based on R9 Nano Reference) Iron Wolf NAS 8TB CMR SATA HDDs x2 SanDisk 500GB SATA SSD I know the GPU choice isn’t really what is recommended in-here but sometimes you just have to make/do. Please tell me if my expectation (s) for this GPU: - Docker support? (KoDi/Anything similar to plex? Plex docs says it doesn’t) - Next Cloud App support for image/video transcoding? (Again probably not via docker?) - that infamous AMD GPU reset bug (well...device detach script / kernel patching FTW?) - what really can I use this GPU for then? (apart from a win 10 VM ) are somewhat worth it? 😕 Happy to be here!