cjohnson46

I haven't heard of that driver, but I will confirm that "Ondemand" does work for my 3960x (Zen2) as far as I can tell, within the "Tips & Tweaks" plugin. *Also, "Enable Intel Turbo/AMD Performance Boost?" seems to work as well. The biggest difference is between "Power Save" and "Performance". YMMV I guess.

You're right, I had it wrong some how in the beginning. It worked this time around. Thank you for helping a dummy like me. Donation on the way. Thanks again

I previously had it set to 23:00 for "power save" then 09:00 for "Normal (On demand)". So you're saying that the cron won't trigger until it goes past 23:00 or 09:00. It was set last night before 23:00 but didn't trigger/change when I checked at 07:00. I'll give it a couple more tests and see if I can figure it out.

This plugin is the best! It has saved me so much money. I'm not sure this is the place to post issues, but I have just have one problem. It seems the "Schedule CPU Power Saving Mode" isn't working for me. I made sure my Unraid date and time are correct, set the schedule properly, but it still won't change to "Power saving" mode during the schedule. I'm on Unraid 6.11.5 with Tips & Tweaks plugin dated "2023.02.01". I att ached my diag file. Thanks! skynet-diagnostics-20230418-0915.zip

I have completely given up on Raven support. While their product is great, their customer & technical support is some of the worst I've dealt with. Between their scripted (basic) responses and being hung up on multiple times when they did not want to elevate me to a more knowledgeable tech agent, I stopped trying. They also used to push updates all of the time. As much as I don't want to give them an out, we did have it working in Unraid 10, so hopefully we can get it figured out on our side. SFTPGo is great! I installed it and was up and running with the FTP within 5 minutes. It's far superior to Unraid's FTP server. sFTP didn't work unfortunately 😏

Hey guys, I'm glad it's not just me with this issue. Unfortunately I'm not getting update notifications on my posts, but I'll start to check it manually more often. I decided to give ChatGPT a try on the issue and it basically states what @bwitting said. After entering my logs, I got this reply. I installed nano next and changed my samba config file to include my share and "browseable = yes" to my share path as someone online suggested. It didn't help but I thought I'd add it just in case you wanted to know what works or not. [Docspell_consume] path = /mnt/user/Docspell_consume browseable = yes writable = yes guest ok = yes read only = no create mask = 0666 directory mask = 0777 bwitting - I also took your advice on SFTPGo. It was a one click install. I just fired it up, so I'll have to figure it out. It's definitely worth a try for a quick fix but I'm not giving up yet.

I have the exact same problem with docker containers not installing. Other people seem to have a problem filling up the rootfs but mine is at 6%. My /run directory is at 98-100%, so I'm guessing that is the problem too. I believe I saw someone suggest increasing the size of it, but I'm not sure that fixes the underlying problem (If there is one). I've seen some other users diagnostics show 1%, so something is definitely filling it up for us. I also have a large Plex install so maybe that's what is causing it. Since tmpfs lives on your ram, a reboot fixes the problem for a short while. Hope we can get some help on this.

Thanks for the reply! I did try disabling SMBv1 (Enable NetBIOS: No) after enabling it. My current setup for SMB is exactly the same as it was once I upgraded and I tried all other combinations, so I have no other ideas. The scanner is connected through Ethernet and has a WiFi backup. I tried disconnecting each at a time but nothing changed. I'm connecting to UnRAID through the local WebUI. As I said, I haven't changed anything other than upgrading to the latest stable build. I'm starting to think that some sort of change that UnRAID made in these more recent builds might be causing the issue. I've went through the changelog and can't find any mention of changes that would cause this. LOL! I know! I wish it was more explanatory. This seems to be my luck. I have also tried contacting Raven for support but they must not like hard questions because they hang up immediately every time I call now. Thank you again for the help!

Hello all, I'm not sure what changed between Unraid 6.10.3 to 6.11.5, but my Raven document scanner isn't able to connect to my SMB share for file backup. It gives me a "Undefined: undefined" error. I was hoping someone with some more knowledge could help me out. Everything was working on 6.10.3, upgraded to 6.11.5 and it wouldn't connect, then downgraded back to 6.10.3 and it worked again. Unfortunately I didn't save any logs so I can't help in that way. I'm just wondering if some sort of protocol changed between these versions. Or, maybe it changed a default setting that I didn't notice. The read and write permissions were correct and I tried all combinations with Public, Secure and Private security. I also enabled NetBIOS and WSD in case it was a SMBv1 issue. I'm at a loss.

I would edit out your IP if that is in fact yours.

Well, I thought this was fixed, but it seems to keep happening over and over. Any ideas would be great! VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV Hello binhex!, I don't believe in free free tech support, so I sent you a donation for a few coffees. Here's my problem. binhex-sabnzbdvpn version: 3.2.0 [7be9281] I previously installed you sabvpn docker a few days ago and everything went fine and my PIA vpn was staying connected. While fiddling with privoxy (unsuccessfully), I reinstalled the docker a few times, following the normal procedure (remove docker> delete template> delete binhex-sabnzbdvpn folder in appdata). The problem now is that the "Public IPv4 address" and "Nameserver / DNS Lookup" (in the status view) are randomly giving me "Connection failed!". They do this independently and together at times when refreshing the status. My download speed goes from 32MB/s down to almost zero then back up. Any help would be appreciated! I can add my logs. Just not sure which ones to add Here's the only thing that stuck out at me, but this might be normal. Thanks 2021-03-02 22:11:59,062 DEBG 'start-script' stdout output: [info] Application does not require external IP address, skipping external IP address detection 2021-03-02 22:11:59,063 DEBG 'start-script' stdout output: [info] Application does not require port forwarding or VPN provider is != pia, skipping incoming port assignment 2021-03-02 22:11:59,062 DEBG 'start-script' stdout output: [info] Application does not require external IP address, skipping external IP address detection 2021-03-02 22:11:59,063 DEBG 'start-script' stdout output: [info] Application does not require port forwarding or VPN provider is != pia, skipping incoming port assignment

Hello binhex!, I don't believe in free free tech support, so I sent you a donation for a few coffees. Here's my problem. binhex-sabnzbdvpn version: 3.2.0 [7be9281] I previously installed your sabvpn docker a few days ago and everything went fine and my PIA vpn was staying connected. While fiddling with privoxy (unsuccessfully), I reinstalled the docker a few times, following the normal procedure (remove docker> delete template> delete binhex-sabnzbdvpn folder in appdata). The problem now is that the "Public IPv4 address" and "Nameserver / DNS Lookup" (in the status view) are randomly giving me "Connection failed!". They do this independently and together at times when refreshing the status. My download speed goes from 32MB/s down to almost zero then back up. Any help would be appreciated! I can add my logs. Just not sure which ones to add Here's the only thing that stuck out at me, but this might be normal. Thanks UPDATE: The issue seems to have resolved itself. Status has been stable for around 5 hours. I'm assuming it was either a finicky DNS or an issue with PIA. 2021-03-02 22:11:59,062 DEBG 'start-script' stdout output: [info] Application does not require external IP address, skipping external IP address detection 2021-03-02 22:11:59,063 DEBG 'start-script' stdout output: [info] Application does not require port forwarding or VPN provider is != pia, skipping incoming port assignment 2021-03-02 22:11:59,062 DEBG 'start-script' stdout output: [info] Application does not require external IP address, skipping external IP address detection 2021-03-02 22:11:59,063 DEBG 'start-script' stdout output: [info] Application does not require port forwarding or VPN provider is != pia, skipping incoming port assignment