NateCCIE

plugin version: 2019.02.06b I ran two drives today a 3TB and 10TB and they both died exactly at 25% on the zeroing, saying it completed, but DD is still running. On the 3TB , killed the dd, restarted without the pre-read and now it's 38% on the post read. I've never had a problem with preclear like this, I assume something bad happened in a recent update. ############################################################################################################################ # # # unRAID Server Preclear of disk 2YJEA84D # # Cycle 1 of 1, partition start on sector 64. # # # # # # Step 1 of 5 - Pre-read verification: [16:50:12 @ 165 MB/s] SUCCESS # # Step 2 of 5 - Zeroing in progress: (25% Done) # # # # # # # # # # # # # # # # # # ** Time elapsed: 3:18:43 | Write speed: 210 MB/s | Average speed: 209 MB/s # # # ############################################################################################################################ # Cycle elapsed time: 20:08:57 | Total elapsed time: 20:08:57 # ############################################################################################################################ ############################################################################################################################ # # # S.M.A.R.T. Status default # # # # # # ATTRIBUTE INITIAL STATUS # # 5-Reallocated_Sector_Ct 0 - # # 9-Power_On_Hours 0 - # # 194-Temperature_Celsius 26 - # # 196-Reallocated_Event_Count 0 - # # 197-Current_Pending_Sector 0 - # # 198-Offline_Uncorrectable 0 - # # 199-UDMA_CRC_Error_Count 0 - # # # # # # # # # # # ############################################################################################################################ # SMART overall-health self-assessment test result: PASSED # ############################################################################################################################ /usr/local/emhttp/plugins/preclear.disk/script/preclear_disk.sh: line 590: ${write_type_s} in progress on ${disk_serial ($disk_name)}: bad s ubstitution --> ATTENTION: Please take a look into the SMART report above for drive health issues. --> RESULT: Preclear Finished Successfully!.

Sorry if this has already been asked, but is there a reason the server layout plugin spins up all un-assigned drives. It does not seep to spin up array drives. Thanks, -Nate

So I have two drives running badblocks, same seagate, connected to the same controller started at the same time. One is running a lot faster than the other, is that indicative of a bad drive? root@NatesNAS2:~# badblocks -sv -w -o /tmp/badblocks.out.sde /dev/sde Checking for bad blocks in read-write mode From block 0 to 2930266583 Testing with pattern 0xaa: done Reading and comparing: done Testing with pattern 0x55: done Reading and comparing: done Testing with pattern 0xff: done Reading and comparing: done Testing with pattern 0x00: 49.41% done, 34:38:31 elapsed root@NatesNAS2:~# badblocks -sv -w -o /tmp/badblocks.out.sdf /dev/sdf Checking for bad blocks in read-write mode From block 0 to 2930266583 Testing with pattern 0xaa: done Reading and comparing: ndone Testing with pattern 0x55: ndone Reading and comparing: done Testing with pattern 0xff: done Reading and comparing: done Testing with pattern 0x00: 78.56% done, 34:39:17 elapsed

Is there a way to just to the POST read? Some kids turned off the main breakers on my house after a 26 hour write cycle to a USB2 connected 3TB drive. the -T shows a good signature, but I would really like to have it run a complete post read cycle before I open the drive up. Thanks -Nate