antonio3427

Members
  • Posts

    14
  • Joined

  • Last visited

Everything posted by antonio3427

  1. I got to the point where it says "PRESS POWER BUTTON ON SERVER TO CONTINUE " and then I press the power button the script doesn't continue just hangs You have selected this device to dump the vbios from 2d:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] (rev a1) This does look like a valid GPU to me. Continuing ......... Checking if location to put vbios file exists Vbios folder created at mkdir: created directory '/mnt/user/isos/vbios/' I will try and dump the vbios without disconnecting and reconnecting the GPU This normally only works if the GPU is NOT the Primary or the only GPU I will check the vbios at the end. If it seems wrong I will then retry after disconnecting the GPU Defining temp vm with gpu attached Domain dumpvbios defined from /tmp/dumpvbios.xml Starting the temp vm to allow dump Domain dumpvbios started Waiting for a few seconds ..... Stopping the temp vm Domain dumpvbios destroyed Removing the temp vm Domain dumpvbios has been undefined Okay dumping vbios file named rtx 1060.rom to the location /mnt/user/isos/vbios/ /mnt/user/isos/vbios/rtx 1060.rom is less than 70kb This seems too small. Probably the GPU is Primary and needs disconnecting and reconnecting to get proper vbios Running again Disconnecting the graphics card 1 Entered suspended (sleep) state ...... PRESS POWER BUTTON ON SERVER TO CONTINUE
  2. I just installed Radarr and and trying to import my movies and I keep getting page: TypeError: l.responseJSON.map is not a function at r (http://192.168.1.50:7878/index.js?h=zUcZaiTWuIKF4+Ac3h78Ow:1:456976) at S (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:1344524) at div at DocumentTitle at o (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:1359139) at r (http://192.168.1.50:7878/index.js?h=zUcZaiTWuIKF4+Ac3h78Ow:1:145999) at LP (http://192.168.1.50:7878/index.js?h=zUcZaiTWuIKF4+Ac3h78Ow:1:235178) at r (http://192.168.1.50:7878/index.js?h=zUcZaiTWuIKF4+Ac3h78Ow:1:476792) at r (http://192.168.1.50:7878/index.js?h=zUcZaiTWuIKF4+Ac3h78Ow:1:479322) at S (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:1344524) at t (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:1356798) at t (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:1357424) at r (http://192.168.1.50:7878/index.js?h=zUcZaiTWuIKF4+Ac3h78Ow:1:487167) at r (http://192.168.1.50:7878/index.js?h=zUcZaiTWuIKF4+Ac3h78Ow:1:487670) at t (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:1356798) at t (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:1357424) at r (http://192.168.1.50:7878/index.js?h=zUcZaiTWuIKF4+Ac3h78Ow:1:487167) at P9 (http://192.168.1.50:7878/index.js?h=zUcZaiTWuIKF4+Ac3h78Ow:1:1111265) at div at div at r (http://192.168.1.50:7878/index.js?h=zUcZaiTWuIKF4+Ac3h78Ow:1:225697) at r (http://192.168.1.50:7878/index.js?h=zUcZaiTWuIKF4+Ac3h78Ow:1:229137) at S (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:1344524) at n (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:1357961) at t (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:1354141) at u (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:301919) at o (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:303354) at S (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:1344524) at c (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:1342606) at DocumentTitle at o (http://192.168.1.50:7878/vendors.js?h=jiG9XdtP2+0VqLqmyUKw+Q:2:1359139) at e (http://192.168.1.50:7878/index.js?h=zUcZaiTWuIKF4+Ac3h78Ow:1:1113266)
  3. I am having issues with a number of dockers showing refused to connect: Below are the dockers I have so far: Plex, NZBgetm and radarr have no issues. Lidarr and Sonarr refuse to connect I am running a bond interface: I have deleted the dockers, deleted their folders in my appdata folder and re-installed unraid-diagnostics-20210512-1055.zip
  4. I am having issues with a number of dockers showing refused to connect: Below are the dockers I have so far: Plex, NZBgetm and radarr have no issues. Lidarr and Sonarr refuse to connect I am running a bond interface: I have deleted the dockers, deleted their folders in my appdata folder and re-installed unraid-diagnostics-20210506-1031.zip
  5. still experiencing this same issue. Now happening for frequent. unraid-diagnostics-20210421-1412.zip
  6. Anyone been able to figure this out? I have done the following: Turned down my memory to 2400 which my MB supports. Set Global C-state control to disabled Set Power Supply Idle Control to Typical Current Idle Adding 'rcu_nocbs=0-15' in syslinux config while I have been getting 1-2 stable days, i still get crashes at this point I may go back to a intel MB (supermicro) and intel CPU
  7. As soon as I do this, I loose all my cores except for 1
  8. Since changing the mem speed to 2400, im seeing much longer periods before crashes. Around 8-10 hours: M/B: ASUSTeK COMPUTER INC. ROG STRIX X370-F GAMING Version Rev X.0x - s/n: 180221242700511 BIOS: American Megatrends Inc. Version 5603. Dated: 07/28/2020 CPU: AMD Ryzen 7 3700X 8-Core @ 3600 MHz Memory: 32 GiB DDR4 (max. installable capacity 128 GiB) Corsair CMK32GX4M2B3200C16, 16 GiB DDR4 @ 2400 MT/s Corsair CMK32GX4M2B3200C16, 16 GiB DDR4 @ 2400 MT/s
  9. changed my mem speed to 2400. I got more time but still crashed. Attached is what I am seeing when I plug a monitor into the server directly unraid-diagnostics-20210316-0854.zip
  10. I found that my MB (ASUS ROG STRIX X370-F GAMING) supports 4 x DIMM, Max. 64GB, DDR4 2400/2133 MHz Non-ECC, Un-buffered Memory I had 2 x DDR4 @ 3200. I forced it to use 2400. Going to test for a few days to see if this was the issue
  11. I have attached the diagnostics zip file and changed me memory to DDR4-3200
  12. I just recently migrated from a older intel server build to a AMD CPU and since, I have had frequent crashes where the server is unresponsive and I have to reboot the server. Below is the specs I am running: M/B: ASUSTeK COMPUTER INC. ROG STRIX X370-F GAMING Version Rev X.0x - s/n: 180221242700511 BIOS: American Megatrends Inc. Version 5603. Dated: 07/28/2020 CPU: AMD Ryzen 7 3700X 8-Core @ 3600 MHz Cache: 512 KiB, 4 MB, 32 MB Memory: 32 GiB DDR4 (max. installable capacity 128 GiB) I have added my syslogs. I have: Set Global C-state control to disabled Set Power Supply Idle Control to Typical Current Idle syslog-192.168.1.50.log unraid-diagnostics-20210315-0714.zip