Kill3r

Members
  • Posts

    12
  • Joined

  • Last visited

Everything posted by Kill3r

  1. ok, answered my own question after checking the /var/log/syslog found this entry below, i was messing with my own ssl cert about a week ago, and this was the first reboot since. nginx: [emerg] cannot load certificate key "/boot/config/ssl/certs/UnRaid_unraid_bundle.pem": PEM_read_bio_PrivateKey() failed (SSL: error:2807106B:UI routines:UI_process:processing error:while reading strings error:0906406D:PEM routines:PEM_def_callback:problems getting password error:0907B068:PEM routines:PEM_read_bio_PrivateKey:bad password read) so i renamed the UnRaid_unraid_bundle.pem and rebooted, its now back
  2. Hi All Im having an issue after upgrading the 6.11 rc5 (from 6.11 rc4) after the update i cant access the web gui. Although emhttp appears to start,, below is the Listening ports via netstat, there is no 80 or 443, but there is reference to emhttpd.socket listening. I have downgraded back to 6.11 rc4, but the issue still exists. Any Advise?? netstat -anp | grep LISTEN tcp 0 0 0.0.0.0:2049 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:3702 0.0.0.0:* LISTEN 6479/wsdd2 tcp 0 0 0.0.0.0:3702 0.0.0.0:* LISTEN 6479/wsdd2 tcp 0 0 0.0.0.0:3493 0.0.0.0:* LISTEN 4214/upsd tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 6464/smbd tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 6508/rpcbind tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 6273/sshd: /usr/sbi tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 6464/smbd tcp 0 0 0.0.0.0:5355 0.0.0.0:* LISTEN 6479/wsdd2 tcp 0 0 0.0.0.0:5355 0.0.0.0:* LISTEN 6479/wsdd2 tcp 0 0 0.0.0.0:57107 0.0.0.0:* LISTEN 6532/rpc.mountd tcp 0 0 0.0.0.0:40857 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:43415 0.0.0.0:* LISTEN 6532/rpc.mountd tcp 0 0 0.0.0.0:48833 0.0.0.0:* LISTEN 6532/rpc.mountd tcp 0 0 0.0.0.0:48531 0.0.0.0:* LISTEN 6512/rpc.statd tcp6 0 0 :::2049 :::* LISTEN - tcp6 0 0 :::445 :::* LISTEN 6464/smbd tcp6 0 0 :::111 :::* LISTEN 6508/rpcbind tcp6 0 0 :::22 :::* LISTEN 6273/sshd: /usr/sbi tcp6 0 0 :::139 :::* LISTEN 6464/smbd tcp6 0 0 :::53587 :::* LISTEN 6512/rpc.statd tcp6 0 0 :::35781 :::* LISTEN 6532/rpc.mountd tcp6 0 0 :::39643 :::* LISTEN 6532/rpc.mountd tcp6 0 0 :::38389 :::* LISTEN 6532/rpc.mountd tcp6 0 0 :::46505 :::* LISTEN - unix 2 [ ACC ] STREAM LISTENING 49473 4210/blazer_usb /var/run/nut/blazer_usb-ups unix 2 [ ACC ] SEQPACKET LISTENING 10701 1070/udevd /run/udev/control unix 2 [ ACC ] STREAM LISTENING 13639 6280/inetd /var/run/emhttpd.socket unix 2 [ ACC ] STREAM LISTENING 22937 6469/nmbd /var/run/samba/nmbd/unexpected unix 2 [ ACC ] STREAM LISTENING 38777 6482/winbindd /var/run/samba/winbindd/pipe unix 2 [ ACC ] STREAM LISTENING 49772 6508/rpcbind /var/run/rpcbind.sock unix 2 [ ACC ] STREAM LISTENING 53447 6544/avahi-daemon: /run/avahi-daemon/socket unix 2 [ ACC ] STREAM LISTENING 50633 6572/php-fpm: maste /var/run/php5-fpm.sock unix 2 [ ACC ] STREAM LISTENING 38778 6482/winbindd /var/lib/samba/winbindd_privileged/pipe unix 2 [ ACC ] STREAM LISTENING 65074 6718/unraid-api /var/run/unraid-api.sock unix 2 [ ACC ] STREAM LISTENING 42020 1590/mcelog /var/run/mcelog-client unix 2 [ ACC ] STREAM LISTENING 36527 1760/dbus-daemon /var/run/dbus/system_bus_socket unix 2 [ ACC ] STREAM LISTENING 19864 1809/acpid /var/run/acpid.socket
  3. Hi have just found a similar issue on ESXi which is a HP driver based issue (fixed in hpsa-2.0.18), how can i find out what driver version Unraid is using for the HP controller? and can i replace the driver as a test? I do realise this is technically falling outside of the UD plugin now too. Thanks
  4. Any thing i can do from a Unraid perspective to attempt to change the SCSI ID?
  5. Can I get the diagnostics in this condition? Hi Sure, sorry i unplugged on drive to stop it constantly filling the logs with "device /dev/sdx problem getting id" thanks unraid-diagnostics-20220530-1322.zip
  6. Hi @dlandon, here is my diagnostics file. Thanks unraid-diagnostics-20220530-1000.zip
  7. Hi All Having a strange with 2 New SSD's where they are reporting the same SCSI ID/WWN, this is causing an issue where only one can be online at a time, else UnRaid fills the logs with one of the following, dependant on which drive is online. May 27 11:53:16 UnRaid emhttpd: device /dev/sdx problem getting id May 27 12:19:29 UnRaid emhttpd: device /dev/sdy problem getting id Both drives function when only one is plugged in, but i was going to make a cache pool out of the pair, which i obviously cant do unless i can get them both online. As you can see from the attached images, both disks have _32020202020202020 appended to the model/serial, is this a drive issue, or something i can change from within UnRaid? Images are to show the various stats of both drives being online individually, also does not matter if i remove the drives from the historic Devices One Drive Plugged in Adding a second pushes the first into historic devices removed from historic reinserted the first which pushes the second to Historic Devices Thanks
  8. I have upgraded to 6.10.0 rc1, upgrade was very easy. I upgraded as i noted the smart mon tools version upgrade, and I have never had the drive temps shown on my SAS drives, even after the upgrade I'm still having an issue with the temps showing, they still only show * on the main array page, however when I now check the disk attributes I can now see the drive temp, but ths does not make it through to the main page, is there an issue with displaying the temps on the main array page? Thanks and keep up the good work
  9. Hi Any plans to allow the download of the SSL cert and Key, I already have 443 forwarded to a Nginx Proxy, so i would like to set up a new proxy host for this work, is that possable? Or can we use our own ssl certs (assume this isnt possable) due to the reliance on the unraid.net domain. Thanks
  10. Hi im a new Unraid user, still in trial mode, running 6.9.1, on a HP DL380 G8, with the inbuilt P420i in HBA mode, with 20 x 600GB 10K sas drives (got them stupidly cheap) i tried to run this script this morning and got a few issues appear during the run cycle. ./unraid6x-tunables-tester.sh: line 1546: [: : integer expression expected ./unraid6x-tunables-tester.sh: line 1548: [: : integer expression expected ./unraid6x-tunables-tester.sh: line 1550: [: : integer expression expected and Setting all drives to nr_requests=128 for the following tests/usr/local/sbin/mdcmd: line 11: echo: write error: Invalid argument /usr/local/sbin/mdcmd: line 11: echo: write error: Invalid argument are these expected? or is this a unraid/script versioning related issue? Thanks