LeeK

Firstly thankyou for all the support. Looked into Unicable and i think it will be cheaper for me to run 2 more cables myself at this time but will research this more in the future. I have found a TBS card with Quad tuners for a pretty good price its a TBS6985 will this work fine with the TBS modules? Again thanks for everything.

I can do this later as its currently recording. Looking into options i am after this setup. 4 distinct channels to be played at any one time this allows multiple recordings. Currently only have 2 and its causing conflicts. I can look to purchase another card (Quad) or is there something else i can do. Sky Q allows a hybrid LNB using i think its called wideband or highband to allow upto 6 channels from 2 cables is this available on PC? The Quad im looking at is the TBS 6904 unless you can recommend any others?

The reboot was stuck for over 10 minutes. I have removed pihole from the router and subsequent driver changes have rebooted fine so must be the issue something to do with DNS pointing to an ip not available. I have now installed minisatip to see if this shows anything else and when i use Libre i get the Sky card which shows 2 available and they work fine with the cables plugged in. I then install the TBS and it shows 4 i am in the process of using Nextpvr to scan for channels and copy accross to all 4 minisatip devices to see if this will allow me to tune to the tbs and sky cards as i only have 2 cables at the moment. I am waiting for both cards to work together before arranging for more cables to be installed. Happy to rerun any tests that will hopefully show the issue? Just finished the scan using libre and got the 800 channels etc. Installed TBS to see 4 devices and its hung on reboot again. Currently sitting at 300+ seconds and the same screen as previously shared showing both devices being found and then hangs.

I have changed the drivers to Libreelec and it now hangs on boot. This is the output from the screen. I used SSH and did a reboot this way and it did the same thing. Looks like its stuck on the install process. I have Piole installed on the server so changed my router to google DNS and rebooted again thinking this may be an issue. It then rebooted fine. after the reboot its only showing the sky card. attached is a screenshot of the dvb drivers page. There are 3 screenshots showing the devices seen when using the TBS driver package. I have run lspci and input here. Diagnostic file also attached. lspci.txt vaught-diagnostics-20210426-0947.zip

Hi i would say im new to this only got into unraid in the last 8 months. I have a DVBsky card thats been working great but want 2 more tuners. I had an old TBS card 6982 i think its in the box so cant remember. I installed 6.9.2 and installed these drivers. I used openelec first and it finds the dvbsky card great but tvheadend is only showing this not the tbs card too. I installed the TBS drivers and it appears that both are showing but when i split the lunbs accross both cards to test the first channel streams ont he TBS card. I go to stream another channel it tries on the TBS gets -90+ db, fails stops retries and then fails to tune. Its not trying the sky card? Im pretty techy but like i say only dabbled with unraid and dvb for the last 8 months and pretty green any help would be greatly appreciated.