Matt Clawson

After I install the docker and VM, I get a network card error, and then later a black screen. I looked in the thread earlier, and ensured that my virtualized Ethernet adapter was matching. I also thought I read that this may not work with unRAID 6.8.0? I wonder if that is my problem... Any input from the masses?

I'm not teleporting, or at least I don't think i have anything setup for that. I think the only access to the server is through Plex Remote Access with a single open port at 32400 (fairly usual for that.) I'll look into the VPN function to stop that. Attached is the diagnostics for further research. Matt unraid-diagnostics-20190114-2037.zip

Hello! I'm having a problem with my server where numerous cores max out to 100% and never come back to idle. I've already deleted and re-installed all my dockers and apps which did not fix the problem. I cannot correlate the issue to anything specific. Running Top and Netdata I see the following: Log File: ErrorWarningSystemArrayLogin Jan 14 16:43:07 UnRaid sshd[40569]: Accepted none for root from 218.92.1.142 port 33371 ssh2 Jan 14 16:43:07 UnRaid sshd[40569]: Received disconnect from 218.92.1.142 port 33371:11: Jan 14 16:43:07 UnRaid sshd[40569]: Disconnected from user root 218.92.1.142 port 33371 Jan 14 16:43:08 UnRaid login[40630]: ROOT LOGIN on '/dev/pts/4' Jan 14 16:43:09 UnRaid telnetd[39001]: ttloop: peer died: EOF Jan 14 16:43:09 UnRaid in.telnetd[40673]: connect from 223.79.160.38 (223.79.160.38) Jan 14 16:43:47 UnRaid telnetd[40673]: ttloop: peer died: EOF Jan 14 16:43:47 UnRaid in.telnetd[41854]: connect from 223.79.160.38 (223.79.160.38) Jan 14 16:44:02 UnRaid sshd[42599]: Accepted none for root from 218.92.1.142 port 17803 ssh2 Jan 14 16:44:03 UnRaid sshd[42599]: Received disconnect from 218.92.1.142 port 17803:11: Jan 14 16:44:03 UnRaid sshd[42599]: Disconnected from user root 218.92.1.142 port 17803 Jan 14 16:44:24 UnRaid telnetd[41854]: ttloop: peer died: EOF Jan 14 16:44:24 UnRaid in.telnetd[43498]: connect from 223.79.160.38 (223.79.160.38) Jan 14 16:45:00 UnRaid telnetd[43498]: ttloop: peer died: EOF Jan 14 16:45:00 UnRaid in.telnetd[45017]: connect from 223.79.160.38 (223.79.160.38) Jan 14 16:45:03 UnRaid sshd[45104]: Accepted none for root from 218.92.1.142 port 53068 ssh2 Jan 14 16:45:03 UnRaid sshd[45104]: Received disconnect from 218.92.1.142 port 53068:11: Jan 14 16:45:03 UnRaid sshd[45104]: Disconnected from user root 218.92.1.142 port 53068 Jan 14 16:45:35 UnRaid telnetd[45017]: ttloop: peer died: EOF Jan 14 16:45:36 UnRaid in.telnetd[46555]: connect from 223.79.160.38 (223.79.160.38) Jan 14 16:46:01 UnRaid sshd[47529]: Accepted none for root from 218.92.1.142 port 37444 ssh2 Jan 14 16:46:01 UnRaid sshd[47529]: Received disconnect from 218.92.1.142 port 37444:11: Jan 14 16:46:01 UnRaid sshd[47529]: Disconnected from user root 218.92.1.142 port 37444 Jan 14 16:46:11 UnRaid telnetd[46555]: ttloop: peer died: EOF Jan 14 16:46:11 UnRaid in.telnetd[47834]: connect from 223.79.160.38 (223.79.160.38) Jan 14 16:46:16 UnRaid sshd[4192]: Received disconnect from 64.113.32.29 port 38126:11: FlowSshClientSession: disconnected on user's request Jan 14 16:46:16 UnRaid sshd[4192]: Disconnected from user ftp 64.113.32.29 port 38126 Jan 14 16:46:46 UnRaid sshd[435]: Invalid user from 5.101.40.166 port 60882 Jan 14 16:46:46 UnRaid sshd[435]: error: Could not get shadow information for NOUSER Jan 14 16:46:46 UnRaid sshd[435]: Failed password for invalid user from 5.101.40.166 port 60882 ssh2 Jan 14 16:46:46 UnRaid sshd[435]: Connection closed by invalid user 5.101.40.166 port 60882 [preauth] Jan 14 16:46:52 UnRaid telnetd[47834]: ttloop: peer died: EOF Jan 14 16:46:52 UnRaid in.telnetd[570]: connect from 223.79.160.38 (223.79.160.38) Jan 14 16:46:58 UnRaid sshd[675]: Accepted none for root from 218.92.1.142 port 26066 ssh2 Jan 14 16:46:58 UnRaid sshd[675]: Received disconnect from 218.92.1.142 port 26066:11: Jan 14 16:46:58 UnRaid sshd[675]: Disconnected from user root 218.92.1.142 port 26066 Jan 14 16:47:29 UnRaid telnetd[570]: ttloop: peer died: EOF Jan 14 16:47:29 UnRaid in.telnetd[2235]: connect from 223.79.160.38 (223.79.160.38) Jan 14 16:47:55 UnRaid sshd[3181]: Accepted none for root from 218.92.1.142 port 18752 ssh2 Jan 14 16:47:56 UnRaid sshd[3181]: Received disconnect from 218.92.1.142 port 18752:11: Jan 14 16:47:56 UnRaid sshd[3181]: Disconnected from user root 218.92.1.142 port 18752 I'm looking for ideas to correct this issue. Thanks! Matt Gigabyte GA-7PESH2 2x Intel Xeon 2690v2 128gb DDR3 ECC Ram 1x 10 TB Parity 1x 10 TB 7x 6 TB 4x 4TB 2x 2TB 1x Samsung 950 Pro 512 GB Cache 1x Samsung 960 NVME 512GB - Unassigned

I've moved the drive around to different ports by moving it do different hot swap cages. Unfortunately the disk failure follows the drive and not the port. I think the drive is toast.

Hello. While I was away during the weekend, it appears that I had two drives fail on my system. One was the parity drive and the other was a data drive. I've been rebooting my system trying to get access to disk 6 (data drive) to see if there is ANY way I can recover the data prior to losing it. If anyone has any good ideas how to access the data in unraid/linux or in a windows machine it would be greatly appreciated. I have 2x hard drives ready to be installed as replacements, but I want to see if i can save the data first. Matt

Hello! My wife moved into our new home while I'm deployed. Prior to the move, everything worked perfectly, and was shutdown properly prior to moving the box. Since we had a new network setup, the unraid server was not working properly (I had a static IP, which wasn't compatible with the new [default local address was 10 vs 192]). I talked to her, she put the flash drive in my desktop, and i remoted in, and removed all traces of the static IP on the network.cfg file. When she started the computer, the unraid OS started, but all the drives are now missing. I'm looking for any assistance to see what could be the issue. I will not be home until another 45-60 days, and I would like to see if I can get it working again. I do not believe the power supply is the issue, because we are getting lights on all the 5x3 cages in the front of the case. I've attached the syslog for someone to browse. I'll see if I can convince her to hook a monitor and keyboard up to the computer to check the bios next. Thanks to the community! Hopefully it is a simple fix. Matt syslog.txt

***EDIT*** USB Flash drive died that was not linked to the upgrade. Hello, I had a perfectly running Unraid 5.0 and decided to give the beta 6 a try. I upgraded the stick drive to the beta version and gave it a go. After a few hours I checked my server and it wasn't working. Since I didn't see what went wrong (headless setup), I put the stick drive back to 5.0 and tried to boot it again. Nothing, I just get this boot error. So i'm coming to you guys and trying to figure out what went wrong. I've reformatted my usb drive FAT 32 I've used the make bootable batch file Copied all my old stick drive data back over to the usb (Is there just a file or 2 I should be copying over? Shares? Drives?) Still nothing. Attached is the video of my boot up. Also i did check the bios and the USB is selected to boot from. I've come to you guys with my hat in my hand, and trying to figure out what little stupid thing went wrong here. http://youtu.be/4VamHU-8zjc?list=UUgqJdqtU2fP2MXJdlNgXakw Thanks! Matt