Adam S

Does any one have an idea on how to configure DUO API Keys into Guacamole? As soon as I set OPT_DUO = Y. When I try to login I get "An error has occurred and this action cannot be completed. If the problem persists, please notify your system administrator or check your system logs." I found the configuration in \appdata\ApacheGuacamole\guacamole\guacamole.properties

I had the same thing. I renamed "binhex-privoxyvpn" to VPN, but it was being used by "binhex-nzbget". I edited nzbget and changed the Extra Parameters from --net=container:binhex-privoxyvpn to --net=container:VPN. It then stopped rebuilding. I ended up moving away from the method above for VPN. Check this one out instead. https://www.reddit.com/r/unRAID/wiki/guides/vpndockernetwork

I reinstalled Windows 10 and started adding one application at a time then running iperf3. I got to Norton Anti Virus and boom... Speed down to 3.5Gbps. (Even though I thought I ruled it out previously because I disabled it). I started digging deeper with Norton (I didn't want to have my PC unprotected). The exact culprit was "Intrusion Prevention". (Settings -> Firewall -> Intrusion and Browser Protection -> Intrusion Prevention). As soon as I turned it off.... Bam! 9.87 Gbps. P.S. Their customer service are idiots. I called before figuring out the root cause. I told the guy what's going on. Him: Well what do you expect your subscription to do? Me: Not slow down my network traffic. Him: Well we don't provide internet, it's an antivirus software. Me: Yes, a SECURITY suite software that includes firewall with network and browsing protection. Him: I don't know how we can help with your speed. ........... I hung up.

After many days of battling with this I finally reached a conclusion. I decided to eliminate as many variables as possible. I started with my Windows 10 installation. I installed Windows To Go on a USB SSD and booted from it into a fresh installation. I set my static IP on the 10GbE NIC, downloaded iperf3 and ran it. Lo and behold 9.90 Gbits/sec. So after all the problem was my windows 10 installation. I will now reinstall my OS then install one application at a time while testing to figure out which software was the offender (if any). If I find anything I will add it in a reply hopefully it'll help someone.

I thought I found the problem with my post above, but now doing some math pcie 2.0 x4 should still be more than enough for 10GbE. PCIe 2.0 1x can handle up to: 5GT/s So 5 x 4 lanes = 20GT/s Converting to Gbps: 20GT/s * (8b/10b) = 16Gbps. Take away 20% for PCIe 2.0 overhead: 16Gbps - (16Gbps * 0.2) = 12.8 Gbps. That is still more than 10Gbps. Any suggestions are appreciated.

I found out my problem, so I will leave this here in case anyone else has the same issue. I ran HWiNFO64 on my windows and I found out that my 10GbE card is using PCIe 3.0 x4 correctly. I checked my unraid server and it turns out that the slot I had the card in was a PCIe 2.0. Here is how I found out. Open a terminal and type "lspci | grep Ethernet", that will give you a list of devices. Copy the number at the beginning for the device you are trying to get detailed info for. Run the following. Replace 06:00.0 with the numbers for yours. sudo lspci -vv -s 06:00.0 | grep "LnkSta:" This is the result I got. LnkSta: Speed 5GT/s (downgraded), Width x4 (ok) I was expecting Speed 8GT/s for PCIe 3.0. I double checked my MB manual and yep it's a 2.0 slot.

Hi All, I have been fiddling with this for a while and I can't seem to get anywhere above 3Gb/s. Both devices are connected to the home network over 1GbE. (10.0.0.0/24) Both devices are directly connected using 10GbE with a 10M (32ft) Duplex Multimode OM3 fiber cable. (100.0.0.0/24) I've set both MTUs at 9000. I hope this info I provided is sufficient if not please let me know. If anyone could point me at the right direction it would be greatly appreciated. This is the best speed I could manage. Accepted connection from 100.0.0.37, port 40052 [ 5] local 100.0.0.23 port 5201 connected to 100.0.0.37 port 40054 [ ID] Interval Transfer Bandwidth [ 5] 0.00-1.00 sec 367 MBytes 3.08 Gbits/sec [ 5] 1.00-2.00 sec 372 MBytes 3.12 Gbits/sec [ 5] 2.00-3.00 sec 370 MBytes 3.11 Gbits/sec [ 5] 3.00-4.00 sec 368 MBytes 3.09 Gbits/sec [ 5] 4.00-5.00 sec 370 MBytes 3.10 Gbits/sec [ 5] 5.00-6.00 sec 367 MBytes 3.08 Gbits/sec [ 5] 6.00-7.00 sec 366 MBytes 3.07 Gbits/sec [ 5] 7.00-8.00 sec 367 MBytes 3.08 Gbits/sec [ 5] 8.00-9.00 sec 366 MBytes 3.07 Gbits/sec [ 5] 9.00-10.00 sec 368 MBytes 3.09 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth [ 5] 0.00-10.00 sec 0.00 Bytes 0.00 bits/sec sender [ 5] 0.00-10.00 sec 3.60 GBytes 3.09 Gbits/sec receiver Server specifications: MB: ASRock B450M Pro4 CPU: AMD Ryzen 5 3600 RAM: 32GB Video: Nvidia Quadro P400 Networking: Onboard 1GbE 10.0.0.37 Mellanox MCX311A-XCAT 10GbE w/ MFM1T02A-SR SPF+ 100.0.0.37 Storage: Samsung 970 EVO 500GB 4 x 4TB WD Red Windows 10 PC Specs: MB: Asrock X470 TAICHI CPU: AMD Ryzen 7 2700x RAM: 32GB Networking: Onboard 1GbE 10.0.0.23 Mellanox MCX311A-XCAT 10GbE w/ MFM1T02A-SR SPF+ 100.0.0.23 Thank you in advance! uss-ibn-majed-diagnostics-20210603-0037.zip