FlyingTexan

I have filled my Fractal Node 804. I'm trying to add additional drives by adding the QNAP TL-D1600S enclosure. I've put the expansion card in my Unraid server, added the drives to the enclosure, and now booting with all drives blinking red. Is there any issue with adding this system to the unraid server? I'd hate to think I wasted that kind of money on something that wouldn't work but I could always flip it back on ebay and get most of it back. https://youtu.be/s1uVXMlSvKA Is this a driver issue? tower-diagnostics-20211213-1257.zip

Was setting up nextcloud following spaceinvaderone's video and had to hit google which brought me here. I have ATT fiber which has me behind their "gateway" which I'm not a fan of. I'm not sure if there's proper port forwarding or not. I can Access my nextcloud from my desktop that is hardwired into a switch that my server is connected to but not sure if that's relevant since I'm using my browser to do so. However on my cellphone or laptops on my wifi I'm unable to connect. I'm curious if it's an issue with ports and mapping. Might have to setup a router behind my ATT gateway to handle this. Any thoughts, is this something common?

Can you give a little more detail? Did I screw something during setup? It’s been running like this for a while. Are you saying it sees two profiles and tries to use them both at once? Do I just need to remove one somewhere?

Thank you for the response. When I click move the mover empties the cache to the array. I didn’t know about the minimum space. Thank you for that I’ll see if I can find that option. Right now my array is about 60% full I’d guess. No disk in the array is full.

I guess my first question is what normally happens if SABnzb gets to the end of the cache pool? Should it pause until it's cleared or is what happened somewhat expected?

tower-diagnostics-20211209-1402.zip

I have 4TB of SSD and SAB likes to crash all of docker when it gets down to around the 450GB mark. I'm not sure why it's doing this. I have 1GB fiber and do max it out when pulling files. Decided to wipe my library and start clean so it's been going for a few days. Lately with things filling up I'm having this issue. I've had the CA Moving Tuner plugin added that I thought would handle moving and SAB to avoid any slowdowns or issues. Is there something else I could be doing or do I just need to let mover free up some space then slow SAB down?

For the new guy. Does this basically let you backup your macbooks to a server?

Ok so for the next guy looking. When nextcloud's website says to go to the config/config.php it's located on your server under: appdata>nextcloud>www>nextcloud>config>config.php

Where is this /config/www/nextcloud/config? On the server? On my desktop or laptop accessing it? On the nextcloud app on my desktp/laptop or Chrome?

I can't seem to get MariaDB to let me login. I'm a newb and following spaceinvaderone's guide. I've tried both versions of MariaDB in docker. I tried the one he used but kept geting errors so then tried the OFFICIAL version and was following it's instructions to reset the password. I'm getting this response as I do it. Even though the script keeps running and asking me to select options when I get to the end I still can't login.

Or any LSI for 16 drives? Trying to figure out my options here. Can’t seem to flash the other controller on the card. Wondering if megaraid could. Trying to connect to QNAP TL-D1600S

Would like to start running backups of my systems, most notably my photos and texts from iphone. Can seafile do this?

Obviously I'm not the most experienced user but I'm having an issue where my docker apps lose connection and I see that docker is having issues. I delete and remake the image, then reboot, works again for a while. I was trying to setup my shares better so files weren't sitting on my cache drives and I'm wondering if have done something wrong where MOVER is causing problems by moving docker images?

I'm trying to clear a drive of 1.42TB left on it to turn it into another parity drive. Unbalance was showing it'd take about 3hrs but 30 min in the Progress bar shows it's completed and that it's transferred the full 1.42TB. However the option to click "stop" is still there. I'm confused on what's happened here.

Bump anyone?

I purchased a QNAP TL-D1600S and have put 6 drives in it. This unit was used and didn't come with a card so I purchased a $35 card off ebay to work with it. Maybe that's the issue, I have no clue. I put the card in, plugged in all cables. Started up the DAS and the server. Don't see any drives on the main page of unraid. Is there anything I need to do to make this work?

SAB wasn't responding so restarted computer. Had been up around 9 days. Started the array and no dockers. I haven't done anything as of yet. I don't know what I should do.

Plex has lost it's mapping, I have no idea why, how do I fix this? I tried removing then reinstalling the container and didn't work..

Did anyone do the latest update of plex and lose the ability to hardware transcode with their 11th gen intels?

Figured it out and it was no small task! So now I'm trying to do the tags to prefer x265 HDR content and the posts I'm finding from other people dont' seem to matchup with the screens I see in the docker version. Anyone else experience this? If I go to tell it to find x265 where do I put that in the custom profiles?

Hi everyone I'm really hoping someone here can offer up a solution because I'm going a little crazy. Ideally I love radar. I think it works great. My biggest problem is that it won't let me select two different types of downloads. I want 4k for my personal use and 1080p for streaming. I'm trying to run two instances. I'm willing to start from scratch here if someone wants to make an Idiots guide to setting this up. I've finally managed to get two instances running but they mimic each other. So If I make a change in one (the profiles) it changes it in the other. Secondly I can't figure out why my port is 8787 to open the program. If I select 4k I have to manually change the port to 8787 in the browser bar and it pops right up. But then it mimics everything. Please take a gander and look through the photos. I'm really at a loss here so for now will use couch potato to get the 1080p versions but ultimately would love to get this working. What steps did any of you take to get two instances going? What did you change? What network mode are you running them in? I did create a different directory for the install.

Ok..... so how?

I'm trying to get two instances of radarr up and going. I've created a second docker using the first radarr as an image then I changed it's app-data to create a new folder called radarr2. Now it has it's own app data folder. I've been reading where to get this setup working I need to change the ports. I'm unsure which to change but can't seem to change anything. If I go into host and change 7878 to 8787 radarr still starts with port 7878. If when creating the new docker I change the container port from 7878 to 8787 (the one that looks grayed out but you can edit) and still change the host ports to 8787 nothing happens. If I go into the config file I can't seem to change the ports and make it stick. What am I doing wrong? New to this but hoping I don't have to mess with it in the future.