Puregreen59

i to am missing the config.yml file, also the moment i attempt to enable redis and auth, i cant get this to work, comes up with "forbidden" when i attempt to login, and half the time the container will just stop running, any ideas?

anyone else having issues and this didnt help fix, try this is your VM XML <feature policy="disable" name="svm"/> soruce: https://forum.level1techs.com/t/kvm-parameters-to-optimize-hyper-v-with-amd-processors/198804/2

Did either of you figure this out? having the same problem.

+1

Silly Question but you are remembering to put ata-YOURDRIVEID because I've just made the same mistake, I only realised my mistake when i tried to navigate there using cd /dev/disk/by-id/ in terminal and making sure it was there, to only remember that all the drives have ata- before the id's regards.

Hey guys, i noticed a had some emails complaining about udma crc error counts. so i logged on to see that one of my drives has been disabled and is being emulated. before moving on from here i thought id see what you guys think, i have no idea what im looking at when it comes to the smart stats 😅 Posted Diagnostics jarvis-diagnostics-20220218-1426.zip

Yes cheers for pointing it out I had assumed that may have bee causing a problem and have already removed it, but unfortunately no dice, I've got another log for you, it's doing it right as we speak, jarvis-diagnostics-20210918-1321.zip

Hah! i love it! well do let me know if you find anything strange. i have just done a reboot, and i should have grabbed the diagnostics but i didn't but these logs are from the last time. jarvis-diagnostics-20210904-2120.zip

@flyize Did you ever get to the bottom on this? in experiencing the Exact same behavour. the only way to reliably empty out my cache is to disable Docker/Vm's and Reboot, most of the time uncleanly then after reboot its flying thro the whole 300Gb plus no problems at all.

thought id do a video of the reboot procress, forgot to hit record a little earlier, i disabled docker and vm manager to help aid a faster reboot. so after rebooting its perfectly fine as i thought it would be! 🤣😢

okay so im still having trouble with with mover. i've currently almost finished migrating to unraid, and ive set up my lists on radarr and theres quite a back log off movies, a good tb or 2, that need to be downloaded un-rared, recoded to h265 via Tdarr while on the cache drive then move to the array, but what's holding me up now is this mover problem. if anyone can shed some light on more commands or something im missing please enlighten me. im lost and a bit frustrated because i know what happens next, from here im gunna get bored of waiting for seemingly nothing, im going to try and reboot unraid, that's gunna take forever, possibly fail, but if it doesn't fail its going to reboot and tell me it detected a unclean shutdown. then i've got a 50/50% chance its gunna work perfectly fine and move everything like nothing was wrong. i really need some in-sight to whats going on here. hopefully this helps show what i see my side as well as logs.. jarvis-diagnostics-20210904-2120.zip

Oh dam! 😂😁 I'm assuming the sys log is useless after a reboot also? OK well hopefully it doesn't happen again, but if I have another brown trouser moment I'll post it here. Cheers

So I just experienced a scary moment, I noticed a few days ago that plex was having trouble on some of my Clients to play certain movies. today i put some time aside to go through and update everything and make sure things where OK i noticed that next cloud would not come back up, couldn't access its page, and restarting didn't help, and I noticed that 3 or 4 of my cores where pegged at 100% while the rest where within normal range so went over to docker to see that nothing was really using more that a 1% and even then it was maybe 1 container. so i went over to the terminal to run top, i found qemu-system-x86 running with between 40 - 50% i watched this for a good few minutes with the same behaviour, doing a google would suggest this is to do with my windows 10 virtual machine, so i shut it down, and the same behaviour was happening, i confirmed the machine was shutdown at least from a trying to connect to it standpoint, and I couldn't remote in. at this point im thinking, lets do the age old trick of rebooting, so i try to reboot though the GUI and nothing, so next on to the terminal with shutdown now -r nothing, just locks up that terminal, after waiting 30 seconds or so i close it out and open a new terminal and try again, nothing So I figure ill try and help it along, so i stop docker in the docker settings and try again, and bingo, starts rebooting, after a good 5 mins the gui doesn't come back, so i putty in and run top and everything shows as 0% cpu 0% ram ect ect, i wait a good 5 more mins just incase, not wanting to do any unnecessary damage incase its doing something!??! anndddd nothing, so im getting very worried at this point, wondering if i have some hardware failure or something, im left with no choice but to reboot it again, and yet again its refusing. so i move to bare metal keyboard mouse, screen right to unraid and try a shutdown now -r and same problem! so next i try Alt-control-del, after a good minute i try again this time it seams to suggest its running this as "console" (forgive my bad memory but a lot has happened and im pretty stressed out about it XD lol!! ) and Wala! it finaly rebooted, AND came back online normally! Everything seems to be working, plex is now functioning normally as is next cloud and everything else. its almost like nothing happened. apart from something Deffinitly happened and i dont know what! with plex the strange thing seamed to be that only titles that needed to be transcoded where giving me Jip, but then you would move on to another title that also needed transcoding and it was fine..!?.. anyone had a similar issue?.. attached logs in hopes it helps. Cheers guys. jarvis-diagnostics-20210826-2250.zip

I've crossed one out, don't ask questions and I wont lie too you 🤣

I can confirm that I have all my dockers and VM currently running, and downloading on sabnzbd, mover isn't running and nothing appears to be accessing the drives to write, as i would expect. and i have a parity check running again with Expected speeds. on the next cache fill up ill invoke mover Manually and see if i get the same behaviour