Eryrok

It seems to have answered my question itself. The cables are fine, but the drive has become unresponsive. Replaced it with a spare drive and it is currently performing a parity rebuild. It seems the drive was either defective or died. I was unable to get SMART or any data logs due to the drive failure and being unable to reconnect to the drive. Thank you for your help.

diagnostics-20241224-1015.zip

I discovered through fix common problems that my parity drive has been disabled. I recently replaced this drive. I ordered several on black friday from Amazon. It looks like I got used drives instead of new. I don't mind used drives in general, but not for backups or recovery drives. I have a few questions as I am not new to NAS / Unraid, but I am not an expert either. Is this a real issue? Is it a replace it now issue, or do I have some time? I have posted the full disk log below; the issue that caught my eye is: 9 Power_On_Hours -O--CK 100 100 --- - 38556 (1,606 days, I've only had it less than a month) 232 Perc_Avail_Resrvd_Space PO--CK 100 100 004 - 100 (Outside threshold) Any help or info you can offer is greatly appreciated. smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.1.118-Unraid] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Marvell based SanDisk SSDs Device Model: SanDisk SDSSDH31024G Serial Number: 200949800808 LU WWN Device Id: 5 001b44 8b13ddf77 Firmware Version: X6107000 User Capacity: 1,024,209,543,168 bytes [1.02 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5625 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Dec 23 18:07:05 2024 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 9 Power_On_Hours -O--CK 100 100 --- - 38556 12 Power_Cycle_Count -O--CK 100 100 --- - 104 165 Total_Write/Erase_Count -O--CK 100 100 --- - 739110949622 166 Min_W/E_Cycle -O--CK 100 100 --- - 4 167 Min_Bad_Block/Die -O--CK 100 100 --- - 85 168 Maximum_Erase_Cycle -O--CK 100 100 --- - 127 169 Total_Bad_Block -O--CK 100 100 --- - 976 170 Unknown_Marvell_Attr -O--CK 100 100 --- - 0 171 Program_Fail_Count -O--CK 100 100 --- - 0 172 Erase_Fail_Count -O--CK 100 100 --- - 0 173 Avg_Write/Erase_Count -O--CK 100 100 --- - 66 174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 63 184 End-to-End_Error -O--CK 100 100 --- - 0 187 Reported_Uncorrect -O--CK 100 100 --- - 0 188 Command_Timeout -O--CK 100 100 --- - 0 194 Temperature_Celsius -O---K 078 037 --- - 22 (Min/Max 16/37) 199 SATA_CRC_Error -O--CK 100 100 --- - 0 230 Perc_Write/Erase_Count -O--CK 100 100 --- - 2374 1596 2374 232 Perc_Avail_Resrvd_Space PO--CK 100 100 004 - 100 233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 68892 234 Perc_Write/Erase_Ct_BC -O--CK 100 100 --- - 79329 241 Total_Writes_GiB ----CK 253 253 --- - 68638 242 Total_Reads_GiB ----CK 253 253 --- - 50594 244 Thermal_Throttle -O--CK 000 100 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 104 --- Lifetime Power-On Resets 0x01 0x010 4 0 --- Power-on Hours 0x01 0x018 6 143944377444 --- Logical Sectors Written 0x01 0x020 6 717087176 --- Number of Write Commands 0x01 0x028 6 106104560133 --- Logical Sectors Read 0x01 0x030 6 683311817 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 6 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 19 Device-to-host register FISes sent due to a COMRESET