igorguerra

Hi @isaw, Thanks for your reply. What `key` are you talking about? I feel like I'm missing some detail here. About the `no such file or directory`, it seems like a permission problem, but there were no changes on permission on either side. I'm using the `root` account to sync, which should have access to it all, right? I'll try to do a manual sync... Maybe Synology is acting weird, right? Thanks!!!

Anyone?

Hi, I'm trying to setup RSync to work with Synology backup. Everything was working fine until I had to replace my flash drive. /boot/config/go #!/bin/bash # Start the Management Utility /usr/local/sbin/emhttp & bash /boot/custom/etc/rc.d/S20-init.rsyncd modprobe i915 chmod -R 777 /dev/dri /boot/custom/etc/rc.d/S20-init.rsyncd #!/bin/bash if ! grep ^rsync /etc/inetd.conf > /dev/null ; then cat <<-EOF >> /etc/inetd.conf rsync stream tcp nowait root /usr/sbin/tcpd /usr/bin/rsync --daemon EOF read PID < /var/run/inetd.pid kill -1 ${PID} fi cp /boot/custom/etc/rsyncd.conf /etc/rsyncd.conf /boot/custom/etc/rsyncd.conf uid = root gid = root use chroot = no max connections = 4 pid file = /var/run/rsyncd.pid timeout = 600 [backupsFromSynology] path = /mnt/user/appdataBackup comment = Synology Backup read only = FALSE list = yes [boot] path = /boot comment = /boot files read only = FALSE list = yes [mnt] path = /mnt comment = /mnt files read only = FALSE list = yes [test1] path = /mnt/user/downloads comment = Test 1 read only = FALSE list = yes [test2] path = /mnt/disk1/synologyBackups comment = Test 2 read only = FALSE list = yes Command and results: rsync --list-only [email protected]:/backupsFromSynology/ - No such file or directory (2) rsync --list-only [email protected]:/test1/ - No such file or directory (2) rsync --list-only [email protected]:/test2/ - No such file or directory (2) rsync --list-only [email protected]:/mnt/ - List all folders rsync --list-only [email protected]:/boot/ - List all folders RSync Version rsync version 3.2.3 protocol version 31 Copyright (C) 1996-2020 by Andrew Tridgell, Wayne Davison, and others. Web site: https://rsync.samba.org/ Capabilities: 64-bit files, 64-bit inums, 64-bit timestamps, 64-bit long ints, socketpairs, hardlinks, hardlink-specials, symlinks, IPv6, atimes, batchfiles, inplace, append, ACLs, xattrs, optional protect-args, iconv, symtimes, prealloc, stop-at, no crtimes Optimizations: SIMD, asm, openssl-crypto Checksum list: xxh128 xxh3 xxh64 (xxhash) md5 md4 none Compress list: zstd lz4 zlibx zlib none rsync comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions. See the GNU General Public Licence for details. Can anyone help please?

The crashing is solved now. It was either: Updating to the latest BIOS Removing RAM overclocking Anyways, still have to figure out how to make it silk smooth. Thanks!!!

To be honest, I didn't go through the FAQ, I searched the forum for my problems and watched hours of @SpaceInvaderOne videos.... But I will look at the FAQ today. Just to add, I was using the VM to work today and it was going fine, until I entered a meeting and it crashed both the VM and UnRaid. It looks like video playing is the problem. Also, checked event viewer logs on Windows and there's nothing there. By the way, since I have your attention, it should be totally possible to run VMs without a video card, right? VNC should support it, correct? Another thing to add is that I'm using 2 4K monitors but RDP is set to 1440. Here are my logs for the VM: ErrorWarningSystemArrayLogin -uuid 4fbd892d-4da6-5266-b9a4-54c6d721e1cc \ -no-user-config \ -nodefaults \ -chardev socket,id=charmonitor,fd=31,server,nowait \ -mon chardev=charmonitor,id=monitor,mode=control \ -rtc base=localtime \ -no-hpet \ -no-shutdown \ -boot strict=on \ -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x7.0x7 \ -device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x7 \ -device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x7.0x1 \ -device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x7.0x2 \ -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4 \ -blockdev '{"driver":"file","filename":"/mnt/user/domains/FlinksPC/vdisk1.img","node-name":"libvirt-3-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-3-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-3-storage"}' \ -device virtio-blk-pci,bus=pci.0,addr=0x5,drive=libvirt-3-format,id=virtio-disk2,bootindex=1,write-cache=on \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/Windows.iso","node-name":"libvirt-2-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-2-format","read-only":true,"driver":"raw","file":"libvirt-2-storage"}' \ -device ide-cd,bus=ide.0,unit=0,drive=libvirt-2-format,id=ide0-0-0,bootindex=2 \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/virtio-win-0.1.173-2.iso","node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-1-format","read-only":true,"driver":"raw","file":"libvirt-1-storage"}' \ -device ide-cd,bus=ide.0,unit=1,drive=libvirt-1-format,id=ide0-0-1 \ -netdev tap,fd=33,id=hostnet0 \ -device virtio-net,netdev=hostnet0,id=net0,mac=52:54:00:cb:f7:60,bus=pci.0,addr=0x3 \ -chardev pty,id=charserial0 \ -device isa-serial,chardev=charserial0,id=serial0 \ -chardev socket,id=charchannel0,fd=34,server,nowait \ -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 \ -device usb-tablet,id=input0,bus=usb.0,port=1 \ -vnc 0.0.0.0:0,websocket=5700 \ -k en-us \ -device qxl-vga,id=video0,ram_size=67108864,vram_size=67108864,vram64_size_mb=0,vgamem_mb=16,max_outputs=1,bus=pci.0,addr=0x2 \ -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 \ -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \ -msg timestamp=on 2021-09-02 14:06:37.003+0000: Domain id=1 is tainted: high-privileges 2021-09-02 14:06:37.003+0000: Domain id=1 is tainted: host-cpu char device redirected to /dev/pts/1 (label charserial0) 2021-09-02T14:06:59.093937Z qemu-system-x86_64: warning: guest updated active QH Thanks! guerraunraid-diagnostics-20210902-1120.zip

More info: I tested 3 different computers. 2 Window machines got the same issue described above. The MAC machine worked almost perfectly (no crashes and almost no lagging). Tried several different VNCs on Windows and they all got the same result. Another thing I noticed is that sometimes only the remote connection crashes. When it reconnects (in 5 or 10 seconds) it goes back to the login screen and everything is still running. Also, that usually happens when I'm running multiple things at the same time.

Hi, I recently built a new PC and installed UnRaid. I'm having a really hard time making it work properly even though I researched the forum extensively. Windows run fine on bare metal but tried to install VMWare and although it didn't crash, I got the same laggy experience. Here is my hardware info: Ryzen 9 5950x MSI B550 A-PRO Gigabyte GeForce GT 730 G.Skill 2x32GB DDR-4 3600 (overclocked from 3200 to 3600 to match RAM speed) NVME SN850 2x WD Red 4TB Because I had issues with VMWare too, I'm under the impression something on my hardware is causing issues. Here are the problems I'm facing: Windows 10 VM crashing when playing videos Windows 10 VM very laggy Windows 10 VM rebooting sometimes UnRaid crashing sometimes when VM crashes I'm running no docker container and pretty much no plugins (except the ones I end up adding for debugging). Also, not much on the logs as well (can post here if needed) Because this is meant to be a workstation for development, I have no need to pass-through anything. Here is my VM config: <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' id='1'> <name>FlinksPC</name> <uuid>4fbd892d-4da6-5266-b9a4-54c6d721e1cc</uuid> <description>Flinks Workstation</description> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>33030144</memory> <currentMemory unit='KiB'>33030144</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>20</vcpu> <cputune> <vcpupin vcpu='0' cpuset='2'/> <vcpupin vcpu='1' cpuset='18'/> <vcpupin vcpu='2' cpuset='3'/> <vcpupin vcpu='3' cpuset='19'/> <vcpupin vcpu='4' cpuset='4'/> <vcpupin vcpu='5' cpuset='20'/> <vcpupin vcpu='6' cpuset='5'/> <vcpupin vcpu='7' cpuset='21'/> <vcpupin vcpu='8' cpuset='6'/> <vcpupin vcpu='9' cpuset='22'/> <vcpupin vcpu='10' cpuset='7'/> <vcpupin vcpu='11' cpuset='23'/> <vcpupin vcpu='12' cpuset='8'/> <vcpupin vcpu='13' cpuset='24'/> <vcpupin vcpu='14' cpuset='9'/> <vcpupin vcpu='15' cpuset='25'/> <vcpupin vcpu='16' cpuset='10'/> <vcpupin vcpu='17' cpuset='26'/> <vcpupin vcpu='18' cpuset='11'/> <vcpupin vcpu='19' cpuset='27'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-i440fx-5.1'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/4fbd892d-4da6-5266-b9a4-54c6d721e1cc_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none' migratable='on'> <topology sockets='1' dies='1' cores='10' threads='2'/> <cache mode='passthrough'/> <feature policy='require' name='topoext'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/FlinksPC/vdisk1.img' index='3'/> <backingStore/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <alias name='virtio-disk2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/Windows.iso' index='2'/> <backingStore/> <target dev='hda' bus='ide'/> <readonly/> <boot order='2'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.173-2.iso' index='1'/> <backingStore/> <target dev='hdb' bus='ide'/> <readonly/> <alias name='ide0-0-1'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='pci' index='0' model='pci-root'> <alias name='pci.0'/> </controller> <controller type='ide' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:cb:f7:60'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio-net'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-1-FlinksPC/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='disconnected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <alias name='input0'/> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'> <alias name='input1'/> </input> <input type='keyboard' bus='ps2'> <alias name='input2'/> </input> <graphics type='vnc' port='5900' autoport='yes' websocket='5700' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> </domain> Really hoping for assistance here, because I'm running out of ideas. Please let me know anything else I can get from my server. Thanks!!!