TheAndrewGilbert

Members
  • Posts

    16
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

TheAndrewGilbert's Achievements

Noob

Noob (1/14)

0

Reputation

  1. Am I missing the documentation on how to restore my previous pools? I had 2 raidz1s in one pool and mirror-0 in another and unread is acting like it has no idea that these drives were in any sort of array. I obviously don't want to lose any of the data that's on the drives. I found ways to set it up. However, no one's specified a safe way to transition where there's zero data loss. Any assistance is greatly appreciated
  2. It looks like I have other issues to still be able to VNC in to the VM but RDP works
  3. Unfortunately unless I did something wrong I still have the same outcome. Tight VNC and Chrome remote desktop refused to connect. As a part of my troubleshooting in the BIOS I set it to only be allowed to boot to the "CPU" graphics, and is still set. As well as having a dummy plug in one of the DisplayPort ports. un 29 10:50:18 AndrewCityHall kernel: vfio-pci 0000:04:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none Jun 29 10:50:18 AndrewCityHall kernel: br0: port 2(vnet0) entered blocking state Jun 29 10:50:18 AndrewCityHall kernel: br0: port 2(vnet0) entered disabled state Jun 29 10:50:18 AndrewCityHall kernel: device vnet0 entered promiscuous mode Jun 29 10:50:18 AndrewCityHall kernel: br0: port 2(vnet0) entered blocking state Jun 29 10:50:18 AndrewCityHall kernel: br0: port 2(vnet0) entered forwarding state Jun 29 10:50:19 AndrewCityHall kernel: vfio-pci 0000:04:00.0: vfio_ecap_init: hiding ecap 0x19@0x900
  4. I had everything working perfectly fine then I restarted the server trying to get audio functioning within the virtual machine and everything broke. I can get the virtual machine to operate as it did prior to installing the graphics card with VNC graphics. but nothing's happening with the quadro p4000. My logs are apparently 100% full. The log only has this: AndrewCityHall kernel: vfio-pci 0000:04:00.0: BAR 1: can't reserve [mem 0x4000000000-0x400fffffff 64bit pref] Any assistance would be greatly appreciated. andrewcityhall-diagnostics-20220629-0058.zip
  5. Hello everyone! I hope you're all having a wonderful day and have a wonderful weekend ahead of you. I was wondering if I could get some assistance with my issue any assistance is greatly appreciated. My initial intentions were to install Plex. Then reading some threads trying to solve the issue I tried installing another container, lg-connector (fison67). However, that one would not install either. Here are the errors I'm getting: eb 18 14:33:40 AndrewCityHall nginx: 2022/02/18 14:33:40 [error] 4162#4162: *721 upstream timed out (110: Connection timed out) while reading upstream, client: 192.168.2.236, server: , request: "POST /Apps/AddContainer?xmlTemplate=default:/tmp/community.applications/tempFiles/templates-community-apps/SelfhostersUnraidDiscordRepository/fison67-lgconnector-0.0.3.xml HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.1.10", referrer: "http://192.168.1.10/Apps/AddContainer?xmlTemplate=default:/tmp/community.applications/tempFiles/templates-community-apps/SelfhostersUnraidDiscordRepository/fison67-lgconnector-0.0.3.xml" This also locks up parts of the machine requiring me to physically restart it. Any assistance is greatly appreciated! For extra details because it might stem to the issue here's the full history. I initially ended up mounting my ZFS drives to the wrong mounting point. When I went to go swap out one of my defective on delivery drives everything went haywire. I lost pretty much all of my mounting points. The Plex server that I did have disappeared and is nowhere to be seen. I think everything's fixed from it except this. Although after reading one post I've noticed I don't have access to the flash drive storage anymore. andrewcityhall-diagnostics-20220218-1447.zip
  6. I think I've figured out how to fix the shares but now I have the problem of I can't create my Plex docker.
  7. That's what I initially I'm using them for. So should I make an additional mounting point on the disc? What would be the best practice in my case?
  8. Other than the unraid boot drive I'm not still running any other flash drives. Right now I have: Docker vDisk location: /mnt/user/storage/unraid/docker/docker.img Default appdata storage location: /mnt/user/storage/unraid/appdata/ I disable the doctor's and vm's and the error is still occurring every second. Oct 26 07:59:37 AndrewCityHall emhttpd: error: share_luks_status, 5995: Operation not supported (95): getxattr: /mnt/user/Enterprise Oct 26 07:59:37 AndrewCityHall emhttpd: error: share_luks_status, 5995: Operation not supported (95): getxattr: /mnt/user/storage I've tried searching Google for these error codes but all I get is my own post.
  9. I was initially having this problem while I was running two flash drives as an unraid array. @itimpi recommended that I swapped out the dummy usb drives that I was using. That solved my problem initially. The config was: One drive (1TB) unprotected unraid array. With the main storage being ran by ZFS. Two separate zpools, "Enterprise" four 16TB and "storage" two m.2 drives. What led me to finding this error a is the inability to create a Plex Docker. The operation would fail at some point and hang the entire system or at least prevent me from restarting and shutting it down from the web portal. However, replacing the dummy drive with a larger dummy drive fixed my problem initially. Unfortunately, I had received a dying on arrival drive. So I wasn't running a degraded array I shut the server down until I received the replacement drive. I set up a RMA with Seagate and once received I plugged it into an additional SATA port on my motherboard leaving the defective drive in. I started up the server and it seems like a lot of stuff broke mostly occurring with the user shares and it losing its connections the to the ZFS drives. I was able to fix all of that and make the docker containers and vm's happy. However, I'm now back where I started with the original problem and am unable to recreate my Plex docker. Hardware update and recap: -zpool "Enterprise" four 16TB -zpool "storage" two m.2 drives -replacement 16 terabyte hard drive (all five are being detected perfectly fine and I purchased the highest-level license right of the gate) -two internal 1TD hard drives connected via USB as the unraid array. I did add a second drive for a proper parity drive as an idea to troubleshoot the problem Any ideas of what it could be or things I could try? andrewcityhall-diagnostics-20211025-2341.zip
  10. Well it is back 🙃. After getting everything working I realize Newegg had sent me a drive with signs that it was going to fail early so I've had the server off for awhile. Seagate sent me a drive and I installed it into the machine. Pretty much everything broke I was able to restore the network shares I got Dockors started but I've lost my Plex server. VMs aren't currently liking their status of missing some file directories. Any assistance would be greatly appreciated andrewcityhall-diagnostics-20211024-0000.zip
  11. Yea is just to get the array to be started. I can try installing a 1tb HDD that i have, but it will not have any parity.