tola5

Can it just despair like that Sendt fra min SM-G998B med Tapatalk

Hi sorry for that . And the bios also can't one will think it was the cables then but wird if all don't work the same time tower-diagnostics-20210807-1549.zip

Hi after changing a cable so I could use all my slut in LSI 9201-16e Will my unraid not see any HDD . No matter the cable and what off the sas plate I connected it too . Also the sas plate work out any problem in a other controller. So fell I have try what I can think off .. can see in syslog it give a error But not sure what it mean Try too add the part Sorry it look wird hope the syslog help more but it spicel the mpt2sas thing I was wondering what will say it the driver as I understand ? Edit the time code on the syslog and the post info is different update the post today Tower kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Aug 4 23:03:53 Tower kernel: sdc: sdc1 Aug 4 23:03:53 Tower kernel: sd 4:0:0:0: [sdc] Attached SCSI disk Aug 4 23:03:53 Tower kernel: ata5: SATA link down (SStatus 0 SControl 330) Aug 4 23:03:53 Tower kernel: ata6: SATA link down (SStatus 0 SControl 330) Aug 4 23:03:53 Tower kernel: ata7: SATA link down (SStatus 0 SControl 330) Aug 4 23:03:53 Tower kernel: ata8: failed to resume link (SControl 0) Aug 4 23:03:53 Tower kernel: ata8: SATA link down (SStatus 0 SControl 0) Aug 4 23:03:53 Tower kernel: BTRFS: device fsid 3a0fe81f-ee26-4611-91b0-f8133532d249 devid 1 transid 152680 /dev/sdb1 scanned by udevd (1756) Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: sending diag reset !! Aug 4 23:03:53 Tower kernel: random: crng init done Aug 4 23:03:53 Tower kernel: random: 7 urandom warning(s) missed due to ratelimiting Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: diag reset: SUCCESS Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: _base_spin_on_doorbell_int: failed due to timeout count(10000), int_status(c0000000)! Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: doorbell handshake int failed (line=5934) Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: _base_get_ioc_facts: handshake failed (r=-14) Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:11045/_scsih_probe()! Aug 4 23:03:54 Tower kernel: EDAC amd64: F17h detected (node 0). Aug 4 23:03:54 Tower kernel: EDAC amd64: Node 0: DRAM ECC disabled. Aug 4 23:03:54 Tower kernel: EDAC amd64: tower-syslog-20210804-2300.zip

Will think it for you chose raid1 when you make it ? And for the network par I like too know myself should just too make a question myself after use 2 X 4TB so that we can both need help too . My are also just setting there

So it work for me use it if you like . make a frees unraid install on my USB and no lag anymore

Ok some update even it not too much help. my os are Unraid OS version 6.9.0-rc2 it work perfect before and then after a night sleep it happen . have try running on a Ubuntu that I red other have the same problem and it was only a windows problem but I fell it better but still there video playing audio stop some time . Now I have try too ruining windows 10 just clean on my hardware work fine will try boot the nvme up and use it as vm later and give a update the whole are pretty weird Ok a update it the same when it run as a vm , I have not expected different but just too try rule it out . also try deleted my original livbirt image and created a new one that one say it have help him .. But as I wrote not like I change something it work one day then power off go to bed and next day anyone have some crazy guess hope it ok I also post here think it better when it sound like we have the same problem too keep it one place and help is other but of cores if people think it better too keep it in multi post I will do that tower-diagnostics-20210104-1028.zip

have it just happen for you today ? just got the problem today no problem yesterday nothing change but power my server off go to bed and now it happen ? can it be a windows update or something ?

yea test speed and it shold be ok it work now some time but fell more bad TorGuard vs PIA as I use before sadly there some problem with it at the moment. any way thx

368 DHT notes And for peers no on the list it show 0 (number) And tracker some work other don't. It start too upload now but really bad only like 150kb can be unlucky but nomaly it a few MB sek

WireGuard do you change some settings ? it first time I try qbittorrent can I get you too take a pic off you settings perhaps ?

other there have problem with upload ether really not work or only upload few bite and stop ?

hope it help . But good news it work now but don't ask me why so weird

has 2 unraid server Tower Version: 6.9.0-beta25 and Plex Version: 6.8.3 if I send files from Tower to Plex it is at max speed same with Plex server , to a Unassigned Devices drive . but if I send from plex to tower it max out at 10 MB has got new cables. but should not be that. when it works the other way which is totally weird. the speed is the same to a M2 where windows 10 is installed same if it is to the Array with catch use or not just give the best though all welcome im lost tower-diagnostics-20200813-1255.zip plex-server-diagnostics-20200813-1304.zip

Hi first sorry if it not the right place not sure what forum it was best for . Have ask on unraid reddit but look like no one knows but look like im not the only one there will find it useful if it possible , with a plugin or something ? Too get a message when you HDD have run X year I know you can just wate too it brake total or look at smart manuel but just find it a nice thing if it was possible

oh ok it explane thx for the help any way

Thx fond it, weirdly enough it just say No Matching Applications Found. Are it for I was need too make a fress install of unraid on my USB ?

Hi have a question I try too restor my appdata but cant find " CA's Previous Apps section" just me there don't know where too look ?

Ok now it "boot " just with that but just give black screen. Have try go back too 6.8.0 try q35 from 3.0 and up out it help no one there have any ide ? ErrorWarningSystemArrayLogin-nodefaults \-chardev socket,id=charmonitor,fd=33,server,nowait \-mon chardev=charmonitor,id=monitor,mode=control \-rtc base=localtime \-no-hpet \-no-shutdown \-boot strict=on \-device pcie-root-port,port=0x13,chassis=4,id=pci.4,bus=pcie.0,addr=0x2.0x3 \-device pcie-root-port,port=0x14,chassis=5,id=pci.5,bus=pcie.0,addr=0x2.0x4 \-device pcie-root-port,port=0x8,chassis=6,id=pci.6,bus=pcie.0,multifunction=on,addr=0x1 \-device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x1.0x1 \-device pcie-root-port,port=0xa,chassis=2,id=pci.2,bus=pcie.0,addr=0x1.0x2 \-device pcie-root-port,port=0xb,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x3 \-device ich9-usb-ehci1,id=usb,bus=pcie.0,addr=0x7.0x7 \-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pcie.0,multifunction=on,addr=0x7 \-device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pcie.0,addr=0x7.0x1 \-device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pcie.0,addr=0x7.0x2 \-device virtio-serial-pci,id=virtio-serial0,bus=pci.2,addr=0x0 \-drive 'file=/mnt/disks/KINGSTON_SNVP325S2128GB_10OS10HFT73Z/Windows 10/vdisk1.img,format=raw,if=none,id=drive-virtio-disk2,cache=writeback' \-device virtio-blk-pci,scsi=off,bus=pci.3,addr=0x0,drive=drive-virtio-disk2,id=virtio-disk2,bootindex=1,write-cache=on \-drive 'file=/mnt/user/isos/Win10_1607_Danish Home_Pro_x64.iso,format=raw,if=none,id=drive-sata0-0-0,readonly=on' \-device ide-cd,bus=ide.0,drive=drive-sata0-0-0,id=sata0-0-0,bootindex=2 \-drive file=/mnt/user/isos/virtio-win-0.1.160-1.iso,format=raw,if=none,id=drive-sata0-0-1,readonly=on \-device ide-cd,bus=ide.1,drive=drive-sata0-0-1,id=sata0-0-1 \-netdev tap,fd=35,id=hostnet0,vhost=on,vhostfd=36 \-device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:ed:05:fe,bus=pci.1,addr=0x0 \-chardev pty,id=charserial0 \-device isa-serial,chardev=charserial0,id=serial0 \-chardev socket,id=charchannel0,fd=38,server,nowait \-device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 \-device usb-tablet,id=input0,bus=usb.0,port=2 \-device vfio-pci,host=0000:0c:00.0,id=hostdev0,bus=pci.4,addr=0x0,romfile=/mnt/disks/ST1000DM010-2EP102_Z9AH9WFJ/Vega64.rom \-device vfio-pci,host=0000:0c:00.1,id=hostdev1,bus=pci.5,addr=0x0 \-device vfio-pci,host=0000:05:00.0,id=hostdev2,bus=pci.6,addr=0x0 \-device usb-host,hostbus=5,hostaddr=3,id=hostdev3,bus=usb.0,port=1 \-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \-msg timestamp=on2020-02-12 17:05:50.032+0000: Domain id=2 is tainted: high-privileges2020-02-12 17:05:50.032+0000: Domain id=2 is tainted: host-cpuchar device redirected to /dev/pts/0 (label charserial0) Sendt fra min SM-G950F med Tapatalk

Thx [emoji846] Sendt fra min SM-G950F med Tapatalk

Hi are there a way too do that have some big problem getting my VM too work with passthrough off my vega 64 and have read one there have some similar problem after he upgrade too 6.8.1 and 6.8.2 so like too see if it will help

The group it say as I understand give problem are this one IOMMU group 35:[1022:1455] 0f:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Zeppelin/Renoir PCIe Dummy Function Sendt fra min SM-G950F med Tapatalk

Hmm ok it only work one restart open for imput . Have just try always down off Q35 too 3.0 Also update unraid too lates version Sendt fra min SM-G950F med Tapatalk

Ok it work now if I use Q35 3.0 have try both i440fx and q35 the newish version before . Are there some drew back use a older ?

-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \ -msg timestamp=on 2020-02-11 09:18:39.187+0000: Domain id=5 is tainted: high-privileges 2020-02-11 09:18:39.187+0000: Domain id=5 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0) Hi have got a old VM create before 6.8 but have problem with a game and have change GPU so think i will make a clean one It was created way back with a Nvidia 970 but run fine with a Vega 64 . So create a new vnc work but just black screen with gpu passthrough It log say sorry don't know why it are at top. Have try too Google it but just got more confused too say I find one there have something there sound the same He fix it when he got back too 6.8 can I still that ?was on 6.8.2 and have try 6.8.1 same problem. Sorry for any misspelled and . And , problems if you need more info I have forgotten just ask tower-diagnostics-20200211-1034.zip

Thx so much yes it look like it work with them