tola5

Sorry can see I have ask abut it before just forgot it not for spam, even sadly im still really lost

Hi are here one there know what screw I need for the rails , got them with my xcase way back 2010 but can't find them now and the support are really not so responsive sadly have add some pic of the rail if it help it for the case not the rack i need . Sorry for any misspelling Thx in advance

Hi I got a X-Case RM 424 https://www.youtube.com/watch?v=E6qdZ96k78A that I have some problem install it rails kit on . I read it should be the same as a norco 4224 are here any there have some experience with installing rails on it ?. have some pic of the side and the rails kit . https://ibb.co/3RgDpJK https://ibb.co/brnwskp

Hi my cpu use keep too show only at 0% on the web interface ram use are working do anyone know how too fix it ? . I have a Ryzen 2700X cant remember when it happen but work before the latest update tower-diagnostics-20190814-0746.zip

Thx the data are back emulate and syncing now

guest it was for I was rebulding it ? so 2 bad chose as I gues or ? but not too bad got backup or ?

it give this one back then Phase 1 - find and verify superblock... sb realtime bitmap inode 18446744073709551615 (NULLFSINO) inconsistent with calculated value 97 resetting superblock realtime bitmap ino pointer to 97 sb realtime summary inode 18446744073709551615 (NULLFSINO) inconsistent with calculated value 98 resetting superblock realtime summary ino pointer to 98 Phase 2 - using internal log - zero log... ERROR: The filesystem has valuable metadata changes in a log which needs to be replayed. Mount the filesystem to replay the log, and unmount it before re-running xfs_repair. If you are unable to mount the filesystem, then use the -L option to destroy the log and attempt a repair. Note that destroying the log may cause corruption -- please attempt a mount of the filesystem before doing this.

it give this one for disk 4 just like too be sure what the right way are thx for the help hase 1 - find and verify superblock... - block cache size set to 736904 entries sb realtime bitmap inode 18446744073709551615 (NULLFSINO) inconsistent with calculated value 97 would reset superblock realtime bitmap ino pointer to 97 sb realtime summary inode 18446744073709551615 (NULLFSINO) inconsistent with calculated value 98 would reset superblock realtime summary ino pointer to 98 Phase 2 - using internal log - zero log... zero_log: head block 563714 tail block 563710 ALERT: The filesystem has valuable metadata changes in a log which is being ignored because the -n option was used. Expect spurious inconsistencies which may be resolved by first mounting the filesystem to replay the log. - scan filesystem freespace and inode maps... sb_icount 0, counted 8704 sb_ifree 0, counted 3564 sb_fdblocks 976277683, counted 49506984 - found root inode chunk Phase 3 - for each AG... - scan (but don't clear) agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 1 - agno = 0 - agno = 2 - agno = 3 No modify flag set, skipping phase 5 Phase 6 - check inode connectivity... - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify link counts... Maximum metadata LSN (1:563818) is ahead of log (1:563714). Would format log to cycle 4. No modify flag set, skipping filesystem flush and exiting. XFS_REPAIR Summary Sun Jul 14 07:21:16 2019 Phase Start End Duration Phase 1: 07/14 07:21:12 07/14 07:21:12 Phase 2: 07/14 07:21:12 07/14 07:21:13 1 second Phase 3: 07/14 07:21:13 07/14 07:21:15 2 seconds Phase 4: 07/14 07:21:15 07/14 07:21:15 Phase 5: Skipped Phase 6: 07/14 07:21:15 07/14 07:21:16 1 second Phase 7: 07/14 07:21:16 07/14 07:21:16 Total run time: 4 seconds

Sure even I thought my question on how unraid work cold be answer without

Hi are running unraid 6.7.0 Last night when I was putting a usb kabel in my server back I came too touch a sas so it got loos and 2 disk got out off the array so I fix it but but there git emulate now so Google and read on here It was best too power down remove disk power array back power it down and let the disk rebuild it are doing that now. The wird part are just I can see I lost some data how can that be if there emulate and when white too the array it also write too the party can see it are for when I comperin it too my backup there was running with rclone sync Hope I explain it good enough Sorry for any miss spelling tower-diagnostics-20190714-1310.zip

Really great work as always. I got it working just 2 question 1 I can go nextcloud.XXXX.XX and it work if I try too open it the docker or use the local ip it also go there when I look on the traffic in pfsense with ntopng it look like all data go out and ind = use my internet speed can I do so for the local it don't go that way around. 2 are there a way so you can use www. before just people often think that

ok now I got this one plug it in my usb controller card it bib but cant really get it too work anyone there have any barcode scanner work ? https://www.ebay.co.uk/itm/323600450132 edit stupid me forget it perhaps will be smart too attach it too the VM too get it too work

thx

thx just order one are it just plug and start use in the docker ?

nice have looking for something like that a long time, are it possible too use a barcode scaner with the docker ?

backup-diagnostics-20190202-0658.zip

and here when I was moving file from my vm to a other drive all cpu run up 100% and docker most dies try too close the move of the files but mover start runing and docker are still down backup-syslog-20190201-1516.zip

Hi know you have not made H265ize but do any know a way too update the H265 version it a old one in use

oh sorry I just try one more now are there no problem don't get why but will post when it are there one more

Hi sorry late answer it when mover it for sure do it, but also fell like it have happen before but try too move some with copy and don't have any problem so if it are are it only if not use catch for it but as I say it happen when ruining mover think it this one "Feb 1 15:16:07 Backup emhttpd: shcmd (234): /usr/local/sbin/mover &> /dev/null & Feb 1 15:16:53 Backup kernel: docker0: port 2(vethfbc9cb8) entered blocking state Feb 1 15:16:53 Backup kernel: docker0: port 2(vethfbc9cb8) entered disabled state Feb 1 15:16:53 Backup kernel: device vethfbc9cb8 entered promiscuous mode Feb 1 15:16:53 Backup kernel: IPv6: ADDRCONF(NETDEV_UP): vethfbc9cb8: link is not ready Feb 1 15:16:53 Backup kernel: docker0: port 2(vethfbc9cb8) entered blocking state Feb 1 15:16:53 Backup kernel: docker0: port 2(vethfbc9cb8) entered forwarding state Feb 1 15:16:53 Backup kernel: docker0: port 2(vethfbc9cb8) entered disabled state" ? backup-syslog-20190201-1516.zip

Hi my docker are like this docker img = /mnt/cache/docker1.img appdata = /mnt/user/appdata/ my cache drive are not a ssd so are it that ? if I need to change location what are it I need too move of the two or both ? and what are the best way ?

Thx fix the link when back at the pc . But yea I just look the bandwidth up don't look hood and it only 2.0 so 500mbit Have just not any free slots that my controller + gfx take the 3 that was why but thx 😊

Hi I came too order a 4 nic but sadly remember wrong and have no free port this one link Then I read people use that PCI Express X1 to X 16 for gfx I order it but it just don't work are it something I have done wrong or can it just be power there not enough ?

Hi have long time think I will give it a try so order a 4 port nic ... just ofcores forgot I don't have any more free pcie so in the video you talk abut if you only have one nic I try google but I do not even get a ip . I have a other pc I can try it with but will love not too and keep all in my unraid and just with Vlan . if it work and I have not misunderstand my setup are ISP modem router bridge mode to my netgear r7800 ( it can run Vlan) > ether a cheep switch or direct in the unraid box

Hi just like too be sure if I like too setup Socks5 https://nordvpn.com/da/tutorials/socks5/ are it just put the option in there say port 1080 do I need to change some of the port on the docker for that don't know what the all are for . It for with out Nordvpn give problem with upload