kevin182

I too am having this problem. My HA crashes multiple times per day. Last 1 was about 15 minutes in the past. Here are my diagnostics. I am running rc2 as well. lucifer-diagnostics-20250106-2007.zip

This error tells me to post my diagnostics for a solution. Please let me know what you find. As far as I can see, there are no dockers or VMs that are not running and the dashboard is saying 68% of memory is in use. Thank you.lucifer-diagnostics-20250105-1313.zip

If that's the case, I have had 2 flash drives go bad in less than 2 weeks. Seems quite unlikely this is my only problem and considering I purchased a very good quality flash drive for this replacement.

That is the complete diagnostics. Albeit just before trying to shut it down.

Also, when I try to stop the array I continuously get these errors.

Unfortunately, this has appeared again. Please let me know if you have any insights into what is causing this. Thank you.lucifer-diagnostics-20230921-0741.zip

Got a new license key and I believe the flash drive was the problem as the old 1 did have errors on it. Thank you.

Error: {"message":"Request failed with status code 403","data":{"error":"Cannot transfer GUID because you've already transferred 2 times in the past year. Please contact support for assistance."}} I will contact support

I removed the disk but unfortunately it happened again. Thank you. lucifer-diagnostics-20230911-1114.zip

OK. Thank you. I wish there was some way of logically disconnecting the disk. I was hoping to keep it in there to destroy the contents before I threw it out. I will let you know if it happens again. If it does, it will be in the 24 hrs.

After this, I run diagnostics, use the reboot command and wait over an hour. Eventually, I decided I need to hard reboot. Comes up for a while then repeats. Please help, thank you. lucifer-diagnostics-20230910-1952.zip

Great. Thank you for your help. I appreciate it.

I received this on my server this morning. Diagnostics attached. Thank you. lucifer-diagnostics-20230806-0722.zip

Mine did not automatically change. So I manually changed the config container path to /home/node/.n8n/ After that, I updated the container and all my configuration settings came back once I logged in.

Posted Thanks for your help. I appreciate it.

It did work before. I had eth1 assigned to it before upgrading from 6.11.5 to 6.12.2. Here is the chip. It does say it needs a driver for Linux. Here is another person having problems with it. Maybe the same? Over here you told them to submit a bug report.

We can abandon this discussion here as we are discussing this here. Thanks.

I will try a different PCIe slot I did not have it plugged in at that time but I did see it when it was plugged in. Any idea why the eth1 will not appear from the 1 that is in the diagnostics?

I cannot get eth1 to come back after upgrading to 6.12.2. I can see my NIC in the system devices but no new network adapter is appearing. I have tried three different NICs. Attaching diagnostics. UGREEN USB to Ethernet Adapter ASUS 2.5G Ethernet USB Adapter Both of these appear in system devices but no eth1 in network settings 2.5GBase-T PCIe Network Adapter RTL8125B This 1 does not appear at all in the system devices and I have added the plugin for the Realtek drivers. lucifer-diagnostics-20230704-2354.zip

Thank you! This solved it for me. I have 1 other issue. My USB ethernet adapter (2nd on the server) does not appear in the network configuration. Yet, it does appear in the system devices. I know I have seen it appear before and was using it as the docker network interface but it no longer appears. I tried renaming the network.cfg to reset the settings and that has not worked. Thanks.

I did have a total of 3 webgui's open at the same time. I rebooted. and there is barely any CPU now. Thanks for that. However, after letting it sit just on the 1 webgui for about an hour, it became unresponsive again. This time it did not require a hard reboot. I was able to change the URL to base URL and refresh the webgui. I honestly think there is some hardware that is not compatible with 6.12. I should mention this is my second time upgrading to 6.12 from 6.11.5. First I upgraded to 6.12.0 and I was having these unresponsive bouts as well but no flash corruption then. I then downgraded thinking 6.12 was just not ready yet. It seems I have even more problems now. On top of this, I upgraded to 6.12.2 yesterday to solve another problem. My btrfs cache pool had uncorrectable errors. I could not get it to reformat for the life of me. Erase would not erase. Still showed over 400 GB but I was able to successfully move everything off of it or so I think. Upgraded to 6.12.2 and converted the cache to ZFS and copied system and appdata shares back to cache. All drives pass abbreviated smart test Memory check done overnight last night. Passed No dockers running No VMs running Attaching most recent diagnostics lucifer-diagnostics-20230704-1239.zip

I don't think it is false because the Windows computer does detect an issue with the USB and repairs it. The UI is very sluggish and finally stops responding. My CPU is very active too, yet no docker or VMs running. Also, this pop up console windows just closes on it's own. This is very strange

It is still showing sporadically. I don't think it is related to the array starting because it could happen at any time. In fact, I do not think it is related to the USB flash drive at all because I have now a second flash drive it is reporting is corrupted. I have been shutting down, taking the flash drive to my Windows computer and repairing it. It still happens after.

Said to post my diagnostics to the forum. Just upgraded to 6.12.2 today. Here are the diagnostics. Let me know if you can help. Thank you. lucifer-diagnostics-20230703-2029.zip