unbeatable

I have set appdata, domains, isos, and system folders in Appdatavm as primary storage and secondary as none in pool drive. Somehow it moves to cache drive and disk1. How do I fix it?

@JorgeB My unmountable drive is cache. What disk ID do I use for BTRFS restore? btrfs restore -v /dev/md? /mnt/disk2/restore

@JorgeB Sorry, I didn't get a chance to work on it since then. If I have to reformat, could you please guide me through the necessary steps to ensure that my data remains intact? Additionally, I'm interested in transitioning to a new system equipped with a different CPU and motherboard. What step should I follow?

@ChatNoir Please see attached zip file. tower-diagnostics-20220719-2305.zip

Unraid reboot and now my cache drive showing error. What could be the reason? How do I fix this?

I was able to boot Unraid by choosing manually in BIOS boot options. I think I screwed up something in Fix Common Problems plugin when it was running ok. Do you think it's better for me to recover from my flash drive backup at this point?

happened after updating Unraid OS and reboot. I didn't update BIOS.

I'm stuck in boot menu in BIOS Yes, I do have backup from Aug 2019.

Can someone help me what to do next?

Hi, My server is up and running for 10 years. Last firmware update messed up my boot drive. After rebooting, it's not booting back to Unraid OS. My booting order is correct. I did first aid in MacOS to repair the USB if there is any issues but no luck. How do I troubleshoot the issue? Please help!

Hi, I am having issue with one of the hard drives. It failed and dropped out of array. So, I replaced it with a new hard drive. After it's up and running, I see error as below. Can someone tell me what is going on? Apr 27 00:08:53 Tower kernel: ata3.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 frozen Apr 27 00:08:53 Tower kernel: ata3.00: irq_stat 0x08000000, interface fatal error

Thanks I'll look into it.

Thanks, BRiT! Anything I can do to clear the warning?

Hi, I noticed on the dashboard page, I see two of my hard drives have yellow warning sign on SMART status. I did smart short self-test and they both completed without error. Do I need to worry about anything? I hope someone can help me with this. Disk 2: Western Digital Red [4TB] highlighted on #5 Reallocated sector count ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 182 051 Pre-fail Always - 483 3 Spin_Up_Time 0x0027 182 182 021 Pre-fail Always - 7875 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 297 5 Reallocated_Sector_Ct 0x0033 197 197 140 Pre-fail Always - 94 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 4506 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 711 194 Temperature_Celsius 0x0022 129 113 000 Old_age Always - 23 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 Disk 3: Seagate Barracuda 7200.11 [1.50TB] highlighted on #5 Reallocated sector count and #188 Command timeout ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 62858346 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 4041 5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail Always - 157 7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always - 56202053 9 Power_On_Hours 0x0032 064 064 000 Old_age Always - 31801 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 12 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 675 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 094 000 Old_age Always - 274882101314 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 236 190 Airflow_Temperature_Cel 0x0022 075 046 045 Old_age Always - 25 (Min/Max 17/28) 194 Temperature_Celsius 0x0022 025 054 000 Old_age Always - 25 (0 14 0 0 0) 195 Hardware_ECC_Recovered 0x001a 047 026 000 Old_age Always - 62858346 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 193 000 Old_age Always - 12356

I just installed SSD for my cache drive. What is the best way to find out my transfer speed?