DjSni

Das stimmt auch nicht ganz, Owncloud hat sich damals aufgespalten zu Owncloud und Nextcloud. Owncloud ist dann zweigleisig gefahren mit Owncloud und Owncloud Infinite Scale. Infinite Scale wurde von Grund auf neu entwickelt und das dient nun als Basis für OpenCloud.

Would be cool if someone could take another picture of the ZimaCube. I'm sure some people need it too. Thanks in advance.

That's not a problem, since this will be my backup NAS I have hardly installed anything yet. Unfortunately I don't have access to beta releases.

yes i have a 6800 Pro, sure i will test it. thx

yes i had to install it for auto fan to work

I would also be happy if someone could do this.

Restart your switch, Check The cables and restart your unraid, If not working disable 1 nic in bios and tray the Same.

same here. lspci -vs 00:02.0: 00:02.0 VGA compatible controller: Intel Corporation RocketLake-S [UHD Graphics] (rev 04) (prog-if 00 [VGA controller]) Subsystem: Super Micro Computer Inc RocketLake-S [UHD Graphics] Flags: bus master, fast devsel, latency 0, IRQ 200, IOMMU group 0 Memory at 6000000000 (64-bit, non-prefetchable) [size=16M] Memory at 4000000000 (64-bit, prefetchable) [size=256M] I/O ports at 4000 [size=64] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: [40] Vendor Specific Information: Len=0c <?> Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable+ 64bit- Capabilities: [d0] Power Management version 2 Capabilities: [100] Process Address Space ID (PASID) Capabilities: [200] Address Translation Service (ATS) Capabilities: [300] Page Request Interface (PRI) Kernel driver in use: i915 Kernel modules: i915 dmesg | grep i915 [ 56.966261] i915: loading out-of-tree module taints kernel. [ 57.087072] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 57.087121] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 57.088040] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 57.090762] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/rkl_dmc_ver2_03.bin (v2.3) [ 57.757911] i915 0000:00:02.0: [drm] failed to retrieve link info, disabling eDP [ 57.866605] i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_70.1.1.bin version 70.1.1 [ 57.866607] i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc_7.9.3.bin version 7.9.3 [ 57.869083] i915 0000:00:02.0: [drm] HuC authenticated [ 57.869580] i915 0000:00:02.0: [drm] GuC submission enabled [ 57.869580] i915 0000:00:02.0: [drm] GuC SLPC enabled [ 57.869902] i915 0000:00:02.0: [drm] GuC RC: enabled [ 57.870356] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized [ 57.871036] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1 [ 57.882256] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 57.882376] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes echo 4 > /sys/devices/pci0000\:00/0000\:00\:02.0/sriov_numvfs bash: /sys/devices/pci0000:00/0000:00:02.0/sriov_numvfs: Permission denied I have a Intel® Xeon® E-2356G

that would be nice!

Hello, not quite so you can more easily exclude only a few from autoupdate mechanism and all new ones are also updated automatically. Greetings

Hello, thank you for this great plugin. Currently I have in the settings the possibility to select all or selectively which plugin or docker container should be updated, only I would like if there would be a kind of blacklist. Then you could select only those that should not be updated, so which should be excluded. greetings

Hi, thanks for the new plugin. But unfortunately I can only see how on the screenshot. ,

Abhängigkeiten diverser Plugins: perl-5.32.0-x86_64-1.txz python2-2.7.18-x86_64-4.txz python3-3.9.6-x86_64-1.txz python-pip-21.2.3-x86_64-1.txz Für Analysezwecken: vnstat-2.1-x86_64-1.txz iftop-1.0.4-x86_64-2.txz iotop-0.6-x86_64-1_fs.tgz iperf3-3.9-x86_64-1cf.txz testdisk-7.0-x86_64-2.txz Weiß ich nicht mehr warum ich es installiert habe: nc-1.10-x86_64-1.txz ncurses-terminfo-6.1.20191130-x86_64-1.txz Systemoptimierung (oder zum Stromsparen): powertop-2.13-x86_64-1.txz Backup-Script: sshpass-1.09-x86_64-1cf.txz screen-4.8.0-x86_64-4.txz go-1.18.1-x86_64-1cf.txz Bedienerfreundlichere Shell: bash-completion-2.8-noarch-1.txz bashtop-0.8.17-x86_64-1cf.txz colordiff-1.0.18-noarch-1_slonly.txz Einbindung einer Cloud direkt ins system: unionfs-fuse-0.26-x86_64-1dj.txz um RAR als Ordner einzubinden: rar2fs-1.29.0-x86_64-1_SBo.txz rar-5.8.1-x86_64-1_SBo.txz

Moin, ich nutze die folgenden: bash-completion-2.8-noarch-1.txz bashtop-0.8.17-x86_64-1cf.txz colordiff-1.0.18-noarch-1_slonly.txz iftop-1.0.4-x86_64-2.txz iotop-0.6-x86_64-1_fs.tgz iperf3-3.9-x86_64-1cf.txz ipmitool-1.8.18-x86_64-1.txz nc-1.10-x86_64-1.txz ncurses-terminfo-6.1.20191130-x86_64-1.txz perl-5.32.0-x86_64-1.txz powertop-2.13-x86_64-1.txz python2-2.7.18-x86_64-4.txz python3-3.9.6-x86_64-1.txz python-pip-21.2.3-x86_64-1.txz rar2fs-1.29.0-x86_64-1_SBo.txz rar-5.8.1-x86_64-1_SBo.txz screen-4.8.0-x86_64-4.txz tcl-8.6.10-x86_64-1.txz tcllib-1.20-x86_64-1_slonly.txz testdisk-7.0-x86_64-2.txz unionfs-fuse-0.26-x86_64-1dj.txz vnstat-2.1-x86_64-1.txz und zusätzlich: go-1.18.1-x86_64-1cf.txz sshpass-1.09-x86_64-1cf.txz Gruß

lol, these are good CAT6a cables that can do 10GBit/s, but since my switch can only do 1GBit/s and these are the cables I bought new and tested with 1GBit/s! apparently it's not just me who has this problem. https://forums.unraid.net/topic/123263-intel-x710-nic-limited-to-100mb/#comment-1123428