Pstark

I installed the app from the community applications.

Anyone?

Ok so for anyone that comes across this thread, I was able to solve this issue by disabling the cache function for this domain inside my traefik config. Once that was disabled, it worked without issue just like I was connected directly to the container.

I recently added a NVIDIA GPU to my server with the goal of running local LLM’s. In open webui I added the local connection to my ollama container. If I go to the local address for open webui, I can use the model without issue. I host this as a service with on a subdomain but when I go to the domain it's hosted at, it doesn't work. I get an error with just brackets.

I know I have seen such containers that remove unplayed media from Jellyfin in videos before but I can’t remember the name of it. For example, I want to remove movies and series that have not been played in 180 days. Can someone help me as to the name of such a container that works with Jellyfin?

Ok, I figured it out. I had to export all pools then restart the server. Since the sas and disk_storage pools already had the drives assigned to them, the pools populated correctly and I just had to format the zfs_pool drives and I’m back up and running like I wanted.

I tried this and it says they’re unmountable. I’m not worried about the zfs_pool since I have to rebuild it but the other pool (sas and disk_storage) I can’t reformat them without loosing data,

My goal was to remove four drives from a pool. I have a total of three pools. disk_storage: 4x 18TB drives sas: 4x 1.6TB drives zfs_pool: 12x 3.84 drives (this is the one I wanted to remove four drives from to make it 8 drives. I copied all the data from the zfs_pool to the disk_storage pool to back it up. Then I removed the four drives and made a new config but I was expecting to see the option to keep all the pool assignments, and then I would just remove the four drives and transfer the data back into the pool. I think this is where I went wrong. Afterwards, no pools are displayed in the GUI but the pools are intact in ZFS master and in the CLI. How do I get the pools to show as they did before on the main tab, with each pool with each associated drive under it?

Changing the bifurcation made no difference

Another note I can add is, with the server powered on I removed one of the drives that was not being recognized and replaced it with a Kioxia CD-8 drive and it was populated without issue. I removed it for the data move but afterwards it will be installed again.

with the HBA installed with no drives currently attached below are the output of that command. Im doing a large data move to remove four drives.I have a pool with unused space so i’m just going to remove them. root@Tower:~# lspci -d 1000: -vv 01:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 (rev 02) Subsystem: Dell HBA330 Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 307 IOMMU group: 49 Region 0: I/O ports at 3000 [size=256] Region 1: Memory at f6200000 (64-bit, non-prefetchable) [size=64K] Region 3: Memory at f6000000 (64-bit, non-prefetchable) [size=1M] Expansion ROM at f6100000 [disabled] [size=1M] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Express (v2) Endpoint, IntMsgNum 0 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr+ UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 512 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s, Exit Latency L0s <2us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 8GT/s, Width x8 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range BC, TimeoutDis+ NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS- LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+ EqualizationPhase1+ EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported, FltMode- Capabilities: [a8] MSI: Enable- Count=1/1 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [c0] MSI-X: Enable+ Count=96 Masked- Vector table: BAR=1 offset=0000e000 PBA: BAR=1 offset=0000f000 Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 04000001 0000200f 01080000 a11af183 Capabilities: [1e0 v1] Secondary PCI Express LnkCtl3: LnkEquIntrruptEn- PerformEqu- LaneErrStat: 0 Capabilities: [1c0 v1] Power Budgeting <?> Capabilities: [190 v1] Dynamic Power Allocation <?> Capabilities: [150 v1] Single Root I/O Virtualization (SR-IOV) IOVCap: Migration- 10BitTagReq- IntMsgNum 0 IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+ 10BitTagReq- IOVSta: Migration- Initial VFs: 16, Total VFs: 16, Number of VFs: 0, Function Dependency Link: 00 VF offset: 1, stride: 1, Device ID: 0097 Supported Page Size: 00000553, System Page Size: 00000001 Region 0: Memory at 0000000000000000 (64-bit, non-prefetchable) Region 2: Memory at 0000000000000000 (64-bit, non-prefetchable) VF Migration: offset: 00000000, BIR: 0 Capabilities: [148 v1] Alternative Routing-ID Interpretation (ARI) ARICap: MFVC- ACS-, Next Function: 0 ARICtl: MFVC- ACS-, Function Group: 0 Kernel driver in use: mpt3sas Kernel modules: mpt3sas 42:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS3416 Fusion-MPT Tri-Mode I/O Controller Chip (IOC) (rev 01) Subsystem: Lenovo ThinkSystem 430-16i SAS/SATA 12Gb HBA Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 340 IOMMU group: 32 Region 0: Memory at 28080f00000 (64-bit, prefetchable) [size=1M] Region 2: Memory at 28080e00000 (64-bit, prefetchable) [size=1M] Region 4: Memory at b1500000 (32-bit, non-prefetchable) [size=1M] Region 5: I/O ports at 6000 [size=256] Expansion ROM at b1600000 [disabled] [size=256K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [70] Express (v2) Endpoint, IntMsgNum 0 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 75W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr+ UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 512 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 8GT/s, Width x8 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp+ ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS- LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+ EqualizationPhase1+ EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported, FltMode- Capabilities: [b0] MSI-X: Enable+ Count=16 Masked- Vector table: BAR=0 offset=00002000 PBA: BAR=0 offset=00004800 Capabilities: [d0] Vital Product Data Product Name: ThinkSystem 430-16i SAS/SATA 12Gb HBA Read-only fields: [UU] Unknown: 31 33 33 41 38 44 36 45 45 34 34 44 34 46 30 43 39 39 44 36 36 35 30 43 34 36 34 45 35 37 37 35 [SH] Unknown: 34 33 30 2d 31 36 69 20 53 41 53 2f 53 41 54 41 20 48 42 41 [MN] Manufacture ID: Lenovo [S1] Unknown: 4c 34 53 54 32 32 53 53 47 30 30 [S2] Unknown: 53 50 43 30 38 33 31 33 35 39 20 20 20 20 20 20 [PN] Part number: SR17A04583 [MO] Unknown: 53 41 53 33 34 31 36 [FN] FRU: 01KN501 [FO] Unknown: 4e 2f 41 [MD] Unknown: 30 38 [CL] Unknown: 32 32 [PT] Unknown: 30 39 [OP] Unknown: 4e 2f 41 [RV] Reserved: checksum good, 0 byte(s) reserved End Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr+ HeaderOF- AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [148 v1] Power Budgeting <?> Capabilities: [158 v1] Alternative Routing-ID Interpretation (ARI) ARICap: MFVC- ACS-, Next Function: 0 ARICtl: MFVC- ACS-, Function Group: 0 Capabilities: [168 v1] Secondary PCI Express LnkCtl3: LnkEquIntrruptEn- PerformEqu- LaneErrStat: 0 Capabilities: [254 v1] Dynamic Power Allocation <?> Capabilities: [284 v1] Vendor Specific Information: ID=0002 Rev=1 Len=100 <?> Capabilities: [384 v1] Vendor Specific Information: ID=0001 Rev=1 Len=038 <?> Kernel driver in use: mpt3sas Kernel modules: mpt3sas c1:00.0 Serial Attached SCSI controller: Broadcom / LSI Fusion-MPT 12GSAS/PCIe Secure SAS38xx Subsystem: Broadcom / LSI 9500-16i Tri-Mode HBA Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 197 IOMMU group: 0 Region 0: Memory at 18010a00000 (64-bit, prefetchable) [size=1M] Region 2: Memory at 18010900000 (64-bit, prefetchable) [size=1M] Region 4: Memory at b7500000 (32-bit, non-prefetchable) [size=1M] Region 5: I/O ports at f000 [size=256] Expansion ROM at b7600000 [disabled] [size=256K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [70] Express (v2) Endpoint, IntMsgNum 0 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 75W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr+ UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 512 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 16GT/s, Width x8, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 16GT/s, Width x4 (downgraded) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR- 10BitTagComp+ 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkCap2: Supported Link Speeds: 2.5-16GT/s, Crosslink- Retimer+ 2Retimers+ DRS- LnkCtl2: Target Link Speed: 16GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+ EqualizationPhase1+ EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: Upstream Port, FltMode- Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- Vector table: BAR=0 offset=00002000 PBA: BAR=0 offset=00003000 Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr+ HeaderOF+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [148 v1] Power Budgeting <?> Capabilities: [158 v1] Alternative Routing-ID Interpretation (ARI) ARICap: MFVC- ACS-, Next Function: 0 ARICtl: MFVC- ACS-, Function Group: 0 Capabilities: [168 v1] Secondary PCI Express LnkCtl3: LnkEquIntrruptEn- PerformEqu- LaneErrStat: 0 Capabilities: [188 v1] Physical Layer 16.0 GT/s Phy16Sta: EquComplete+ EquPhase1+ EquPhase2+ EquPhase3+ LinkEquRequest- Capabilities: [1b0 v1] Lane Margining at the Receiver PortCap: Uses Driver- PortSta: MargReady+ MargSoftReady- Capabilities: [218 v1] Dynamic Power Allocation <?> Capabilities: [248 v1] Vendor Specific Information: ID=0002 Rev=4 Len=100 <?> Capabilities: [348 v1] Vendor Specific Information: ID=0001 Rev=1 Len=038 <?> Capabilities: [380 v1] Data Link Feature <?> Kernel driver in use: mpt3sas Kernel modules: mpt3sas root@Tower:~#

I swapped the four drives that are missing in Unraid to a different backplane and they appear. Then the four drives that were moved to the backplane that is connected to the 9500 become missing. I think it could be bificuration issue. I will see if I can enable PCIE bifurcation on the PCIE slot with the 9500. This seems logical this would be needed but I have never had to enable it the past. Will post my findings afterwards.

I upgraded a backplane to the NVME compatible backplane that supermicro released for my RM43-320-RS chassis. I also added an LSI 9500-16i with 05-60007-00 cables. All four drives are SAS drives that were functioning normally prior to changing the backplane. Afterwards, when I turn the server on the four drives connected to the backplane show a red light. When it boots up the array doesn't auto start and says the four drives are missing. No activity is indicated by the led's and the drives aren't listed under system devices. I tried reseating the connections and moving the HBA to a different PCIE slot, several restarts, verified Cable PN, verified HBA initializes but no drives are listed during initialization. Can anyone assist? Being a tri-mode HBA, the SAS drives should function normally right?tower-diagnostics-20251225-0112.zip

I'm really curious if there is a way to upgrade a docker container when an update is available without copying the the whole docker run command? I figure the web UI uses a similar command when I click update on a container.

I've had poste working for quite a while but after I switched my reverse proxy to traefik, I have had issues keeping poste working properly. Currently, mail.homeserver.co letsencrypt certificate is issued using traefik with ports 80 and 443 being handled by traefik. I then have ports 25,110,143,465,587,993,995,4190,8080,8443 forwarded directly to the container. With this configuration, I have attached a screenshot of the connection diagnostics. But when I attempt to add the mail account to a device, the device says the certificate is untrusted because it's expired. I think poste doesn't like the fact that traefik holds the TLS certificate for mail.homeserver.co. I tried to use tls passthrough in my traefik config to allow poste to handle the tls certificates for simplicity but this way I am unable to access the host. If I attempt to issue new certificates using the poste admin panel, it keeps failing. Can someone help me figure out to fix this?

I was hoping it could act as a gateway for clients to connect to a host.

I am trying to connect to my RDP sessions remotely (not on my local network) without a VPN. When I am using the Windows App to connect to the RDP session, I'm not sure how to get the Windows App to point to the apacheguacamole instance I host at rdp.mydomain.io. I tried to use "[email protected]" and "rdp.mydomain.io\guacadmin". but there is no activity in the the apacheguacamole logs. com.microsoft.rdc.macos 2024-12-07--19-16-28-267.txt

I'm using a SAS9300-16i HBA with the cables running out the back into the HDD enclosures and I'm getting some errors.

bump

It was not a typo but I have since disabled it.

It's pretty odd that Unraid network settings says the MAC address for the server is 90:e2:ba:2e:01:bd and if I go into my UniFi console and block that device, the server functions normally. But if I block the mystery device that shares the same IP (16:5d:31:7f:75:65) the server becomes unresponsive. Honestly the only reason I'm looking into this is the fact that UniFI Console shows a message that two devices are sharing the same IP.

macvlan is the only way docker containers show up in Unifi so I want to keep that. I did enable bridging and restarted eth0 but I still have two MAC address for the server. Before the server had 02:e1:d6:c9:90:76 (unknown mac I'm trying to figure out) and 90:e2:ba:2e:01:bd (mac address listed in network settings) and now I the first one changed to 16:5d:31:7f:75:65 and 90:e2:ba:2e:01:bd. If I block 16:5d:31:7f:75:65, the UI becomes unresponsive until I unblock it. If I block the MAC address listed in network settings 90:e2:ba:2e:01:bd, it makes not difference.

I was recently going to my UniFi Devices list and noticed that Unraid had two lines listed with the same IP address. I am trying to figure out where this MAC address is coming from. ifconfig shows it listed as "vhost0". vhost0's IP always matches eth0 which is the fiber connection I intend to use. Supermicro MB has three BbE ports and I have a 2 port Intel SFP+ NIC that has only has one fiber connection to the network. I have checked all docker containers and VM for this MAC address but can't be found. tower-diagnostics-20240331-1512.zip

Currently I have a tower that doesn't have any drive bays. I have my HBA cables running out the back and connecting to my 3 HDD enclosures. This is creating issues with disk errors and therefore I am looking to move to my first rack mount solution. I'm thinking I should get a disk shelf for all my drives and a 3 or 4U my server. Currently I have the capacity for 15 drives with the goal of have 20 drive bays. My first question is, would anyone recommend against this or recommend a better solution? Second question is, how would I connect the server to the disk shelf? I want use a single connection for all my drives if possible.

Ok so SAS and SATA drives can use the same cable but the protocol used depends on the drive.