Towley

My System is running since arouna a year. Any way I can test my CPU and all that stuff on Unraid? Is there a stresstesting Docker/Plugin?

Hi, I now have since ~two weeks these strange "shutdowns" on 6.9.2. Basically... the Server is on and in the next moment it is gone. I am unable to Ping it, nor do I see it in the Router. When I go to it, the Fans are Spinning , not sure about the Drives. It doesn´t matter if I am doing nothing with it or if I am currently watching a Movie. The only thing I can do is to press the Power button and to restart it. I can´´t see any Errors in the Log, only one Timeerror. I thought that it might have to do something with the Mover, but it does not seem to correlate. In the last two hours I had to do it three times. partLog.txt

Is the Fan Control working for you? When I fill in the temp Thresholds and Apply, nothing will be saved. The Form is just empty.

Is there anything I have/can delete from this folder? And i just copied a File from a folder to another in the same Share and the Speed was completely wonky. Mostly around 10MB´s, but sometimes went up to 50MB/s...

My Cache is only 120GB, but as I have said, I do not use a Cache Drive with this Share.

Hello there, I have this problem since some time. Quite often the Copy Speed goes extremely down. Unraid 6.9.2 ; Win10 ; 1GB LAN ; SMBv1 deactivated When I want to copy something to the Server the usual speed is ~113MB/s. Sometimes I get this without problems and sometimes I get this problem. First I get the normal Transferspeed and then after some minutes it suddenly goes down to ~1MB, without any Error Message or whatever. There is nothing in the Log. Sometimes there will be an Error (haven´t seen it since some time), but in most cases I have to abort the Transfer and begin anew. OR I can change something in the Share Settings, then the Transfer will be interrupted and I can directly resume it after an button press. The Files I transfer are not small. The smallest are 5GB up to 80GB. It makes no difference if I use it with or without Cache. It makes no difference which HDD I use. Ideas? It´s really frustrating....

Hi, I am unable to mount a single drive. I am able to mount all others. Mount of 'sda2' failed: '$MFTMirr does not match $MFT (record 28). Failed to mount '/dev/sda2': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. ' Feb 11 11:21:06 Tower unassigned.devices: Partition '4TB_Intern' cannot be mounted. Feb 11 11:21:37 Tower unassigned.devices: Partition 'sda1' does not have a file system and cannot be mounted. Feb 11 11:21:37 Tower unassigned.devices: Adding partition 'sda2'... Feb 11 11:21:37 Tower unassigned.devices: Mounting partition 'sda2' at mountpoint '/mnt/disks/4TB_Intern'... Feb 11 11:21:37 Tower unassigned.devices: Mount drive command: /sbin/mount -t 'ntfs' -o ro,noatime,nodiratime,nodev,nosuid,nls=utf8,umask=000 '/dev/sda2' '/mnt/disks/4TB_Intern' Feb 11 11:21:37 Tower unassigned.devices: Mount of 'sda2' failed: '$MFTMirr does not match $MFT (record 28). Failed to mount '/dev/sda2': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. ' Feb 11 11:21:37 Tower unassigned.devices: Partition '4TB_Intern' cannot be mounted. I have already used chkdsk. It does not find any errors. The drive is shown normally in Win10. Anything else I could do?

Hi, do you have any idea why it doesn´t work for me? fetch_key #!/bin/bash if [[ ! -e /root/keyfile ]]; then mkdir -p /unlock mount -t cifs -o user=tester,password='0987Tester',iocharset=utf8 //192.168.1.1/files /unlock cp -f /unlock/keyfile /root/keyfile umount /unlock rm -r /unlock fi go #!/bin/bash mkdir -p /usr/local/emhttp/webGui/event/starting mkdir -p /usr/local/emhttp/webGui/event/started mkdir -p /usr/local/emhttp/webGui/event/stopped cp -f /boot/config/fetch_key /usr/local/emhttp/webGui/event/starting cp -f /boot/config/delete_key /usr/local/emhttp/webGui/event/started cp -f /boot/config/fetch_key /usr/local/emhttp/webGui/event/stopped # Start the Management Utility /usr/local/sbin/emhttp & Is this correct? When I connect with Windows to the Share the File is under the ip\files Do I need to add the user and password differently? The keyfile is correct.

Hi, what do I have to do if I get "invalid flags"? I am not sure what I am supposed to do... My current key is atm a Passphrase. Also, does this make the file itself to the key or does only the content of the file become the key? ie.: When I write into it "test1" and I loose this file, can I just make a new file with "test1" in it or not since the whole file is important?

HI, The Sleep Plugin does not work for me. I have the Netowrk Activity at 1mb, every connection closed, all Docker are stopped and the Array is stopped. And it will still not go into Sleep mode. I am able to put it to sleep manually. Any ideas? Is there a log?

Hi, my other "Server" died and I decided to finally use some easy Software, unraid. The current Hardware prices are too high for me atm and therefore I want to take one of my old Systems, but I don´t know which one I should take. Especially thinking about some months in the future where I have filled everything. 1.) AMD 1055T 6Sata + PCIe3 Slots, 14Gb Ram 80-150Watts 2.) Atom Board J1900H 2 Sata, 100mbit, PCIE2_x1, 8GB Ram 10W Usage: 2 people, not more than one video at a time File Storage Plex, Calibre, Ubooquity, szurubooru, Komga, Backup Server 5 disks, 1 SSD The System is currently running on the Atom Board. My problem is now that the 1055 had some start problems where it didn´t start reliably anymore, and way more important, the power consumption is quite high. With the big System we are talking about 50-100€ per year and the Atom around 7€ for power, if I assume 4hours per day, which is too low. I would have to buy an USB3 to 1GB Adapter + a 4 Sata PCIE Card for the Atom. Which might or might not make problems... They would cost roughly 60€. My Stuff is currently running on the Atom, it is okay so far. However, the CPU runs at around 18% and Ram 60% when I am doing nothing. Just letting the Containers run and being on the Main Site. When a 4k HDR film is running the CPU goes up to 60%, when at the same time a Scan runs it goes up to 85%. When I have to transcode a Subtitle the CPU dies. I could backup everything and test it on the 1055, but it is not even able to play 4k movies, so I have my doubt that it would be any better for transcoding. However, it should be better for all those Containers. Expected files: 500 movies, 2500 shows, 1000 books, 100*300 Manga Volumes. Soo... when you factor in when I have transferred all my stuff and added a parity disk, do you think that the Atom would still be able to run properly?

HI, I am new to unraid and I wanted to install ubooquity. But I constantly run into a problem. I am unable to connect the GUI. No matter which port, admin or not. I guess it´s due to this: Invalid maximum heap size: -Xmxmaxmemm Error: Could not create the Java Virtual Machine. Error: A fatal exception has occurred. Program will exit. I get this constantly. I have already decreased the heap size all the way down to 256mb, with no change. I already reinstalled the image. Any ideas?