Jump to content

Lou

Members
  • Content Count

    104
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Lou

  • Rank
    Advanced Member

Converted

  • Gender
    Undisclosed
  1. Hi thanks for the past info the fans worked great. Could you tell what model cpu cooler you are using in the pic I have a Noctua cooler but doesn’t seem to keep up with plex or heavy use. thanks in advance lou
  2. Hi I've had a few issues doing an upgrade but managed to get most everything back up and running with a rebuild and new drives but I still have one issues with the md1 drive as per the attached syslog May 10 07:57:38 Unraid kernel: REISERFS error (device md1): vs-5150 search_by_key: invalid format found in block 347719137. Fsck? May 10 12:35:46 Unraid root: Fix Common Problems: Error: Unable to write to disk1 Is there a sulution should I run FSCK to repair it? this is a new drive. Thanks lou unraid-syslog-20190510-1249.zip
  3. Thank you for the quick reply Lou
  4. Hello, due to my bad luck while upgrading my system with a new mother board and replacing a four fan set up to a 3 120 mm fan set I ran into a misfortune with 4 of my drives, the case I have is a Norco 4220 and upon restarting the system found that the second row of drive where not showing up in the array. Looking into it further and reading information on the web come to realize that there was an issue with the back plane on the second row (which many have experience with the older back plane). I went a step further to double check having an older drive I tried it in the first 3rd and fourth row with no issue show up fine then i installed it into the second row with the problem back plane and sure enough fried that drive instantly. Contacted Norco with this issue reading that they have replaced the back planes with new rev. model still haven't heard back from them on the issue. Anyway I did read about shrinking the array and i'm waiting on 3 new 4 tb drives. Question is i have drives 0,1,2,3 lost 4,5,6,7 and still have 8,9,10 when i remove the fried 4,5,6,7 and do the new config do i have to put all the remaining good drive back in the same exact slot meaning the good drives would be in 0,1,2,3,8,9,10. Sorry for the long post just trying to be clear. Any input would be great time to move forward. Lou
  5. Thank you for the reply, what part number and model are your 120mm fans? I have 12 drives with everything counted in and getting ready to install a super micro x11sae-o board with intel I7 7700k cpu. Also have the same case Norco 4224
  6. Hi I was looking for some input on replacing my Norco 4224 case stock noisy 80 mm fans with some 120 mm fans and also replacing the back fans with something quieter. I have a new fan wall coming from Norco but not to sure on what will work to replace the stock fans and quiet the system down. I have 10 drives running as of now. Thanks in advance for any input or advice. Lou
  7. Hi looks good I'm in the process of changing my fans waiting on the fan wall for the 120 mm . Could you tell me what fans you went with Mid and back also how many drive are you running i'm about to order some fans ? what temps are you getting with the larger fans. Thanks Lou
  8. So it seems that disabling VM solved the problem for now no more error messages flooding the syslog for the last 6 hours. I'll have to move the cards around into different slots to see if that helps and purchase some LSI cards I do want to have the VM option for future. Forgot to mention the bios is up to date. Thanks Lou
  9. Thank you for the reply. Do you think replacing the pci card I have (Marvell) with a different type of cards possibly LSI, would possibly resolve this problem? for now I shut of the VM to see how it reacts but I would like to have the VM option for future. does using pcie_aspm=off have any operation effects or is this masking the error and it still going on in the background. I will try all other option in the attached post above but at this point not sure what is the best route moving forward is. should I look at a different motherboard ? Thanks again for the input. Lou
  10. Its filling my log file full ,then a full memory error in the syslog and nothing else is logged until i reboot. I just attached my diagnostics zip file. I had no error with the other board only when I did the change over.
  11. sorry it now attached should i shut down the server in the meantime? Lou
  12. just swapped out my board for evga z170 classified with 1151 i7 cpu and 16 gig of quad channel ram. I now am getting this error in my sys log. Oct 31 19:30:06 Unraid kernel: pcieport 0000:00:1c.6: [ 7] Bad DLLP Oct 31 19:30:06 Unraid kernel: pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6 Oct 31 19:30:06 Unraid kernel: pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) Oct 31 19:30:06 Unraid kernel: pcieport 0000:00:1c.6: device [8086:a116] error status/mask=00000001/00002000 Oct 31 19:30:06 Unraid kernel: pcieport 0000:00:1c.6: [ 0] Receiver Error (First) Oct 31 19:30:06 Unraid kernel: pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6 Oct 31 19:30:06 Unraid kernel: pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) Oct 31 19:30:06 Unraid kernel: pcieport 0000:00:1c.6: device [8086:a116] error status/mask=00000001/00002000 Oct 31 19:30:06 Unraid kernel: pcieport 0000:00:1c.6: [ 0] Receiver Error (First) Oct 31 19:30:06 Unraid kernel: pcieport 0000:00:1c.6: AER: Corrected error received: 0000:00:1c.6 Oct 31 19:30:06 Unraid kernel: pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) Oct 31 19:30:06 Unraid kernel: pcieport 0000:00:1c.6: device [8086:a116] error status/mask=00000080/00002000 any idea or help on this one thanks Lou unraid-diagnostics-20181031-1940.zip
  13. Hi all, I've been checking all over for a good replacement motherboard for my system. I now run a supermicro board Super C2SEE with excellent results for the past 5 yrs or so. I already own a spare intel 1151 I7 6700K CPU along with a set of Corsair 16 GIG 4x4 CMK16GX4M4A2800C16 non-ecc, unbuffered, unregistered RAm that I would like to utilize. I would like to replace my board with another Supermicro board that will except the CPU and Ram I have. Any suggestion would be very helpful and appreciated Lou
  14. Ok thank you for the feedback, glad I asked this question I now have a better understanding for the cache drive. Thanks guys tdallen and Squid great help. Lou