I am currently moving to a new server for unraid, I am moving from a Dell T610 to a consumer pc I built but I am having issues with the hard drives. Because the Dell T610 had a PERC H700 raid controller the names of the hard drives were all over the place and weren't the ID of the actual drive, instead it was of the raid pool, of which I just made a raid 0 for each individual drive. You can see this in the image below.
I am only taking the 10TB drives with me, the parity is also a 10TB Seagate Ironwolf (there is also an additional 10TB drive which I have put in and transferred all the data from the old 3TBs over, this screenshot was taken before that).
I have moved the drives over to the new server, same USB boot drive, but as I am plugging the drives straight into the motherboard now their serial number can be used as the ID, and unraid was confused, so I created a new config to put the drives in order, the same parity drive was used in order to ensure I keep my data intact. However I now get "unmountable: unsupported partition layout" on the drives now. They have been confirmed to work on unraid before with no issues so I am confused as to why it won't mount. I have tried an xfs_repair through the GUI as per unraids guide and it did something, but it didn't fix it. I can also mount the drives through unassigned drives and I can see all my data is there.
I was thinking of formatting each drive individually and move the data around but 1 move of the data will take 2 days at best, so that is a last case scenario. I don't want to have to download >10TB worth of movies and tv shows again.
My diags are attached as well.
If anyone can help me that would be greatly appreciated
Old Setup on Dell T610
Drives can be mounted through unassigned devices and data is intact
Error I am having
manticore-diagnostics-20230422-0944.zip
Edit: I just tried another xfs_repair on one of the drives and it says it has a bad primary superblock and now it is trying to find a secondary superblock
Edit: I got this during the xfs_repair: "..found candidate secondary superblock... unable to verify superblock, continuing...". Not sure if this is normal or not