ehosinski

Thanks everyone for the help. I'm sorry for the delay everyone! I removed it using the GUI and now it works as expected!

Thanks everyone I will give this a try and get back to you all

How can I remove the driver from the CLI?

Glad I am not alone

As the title says its unreachable. I rebooted it, it was there for a few seconds then nothing. I have restarted it a few times but no luck. In the past I have had luck by changing the binding options because I was not able to get a DHCP lease but this does not appear to be the same issue. krakentower-diagnostics-20240218-1314.zip

After upgrading to Unraid 11.6.5 I cannot obtain an IPv4 or IPv6 address. I have tried removing the network.cfg and the network_rules.cfg files from the usb and it never produces the network.cfg file again. I have also tried creating my own network.cfg file using some of the forum posts on here and that also did not produce any results. If I set a static IP Address, I am told that IPv4 is working but it is unreachable. I have two NICs one of them being 10gbps on the PCIe Lane the other the onboard and I prefer and have never had issue using the 10 before this upgrade. Any help would be greatly appreciated. krakentower-diagnostics-20221122-1850.zip

I would love to the problem is as soon as it starts to build parity the entire system is unresponsive.

I did not, I swapped in a HDD for the parity drive but now I am being told that the build will take 37 days 4 hours and 30 minutes? I have attached the diagnostics again krakenhaus-diagnostics-20220205-1632.zip

No reply from host unfortunately

It's not offline again. I think it likely froze again but I have no real way of knowing. I just have the web console up but if I were to refresh or anything it would just lead to a timeout.

@itimpi here is the diagnostics I ran after they were assigned but before starting the array kraken-diagnostics-20220205-0918.zip

So now I started the array and it didn't immediately take the server offline. However it told me that the disks were unmountable. I checked the box to enable formatting and clicked format (I probably should have waited until parity synced) but now the page is taking too long to respond again. I can still see the server on the network this time so it hasn't shut down. But I am again unable to visit the web console as intended. Should I give it a few hours to see if the parity works this time? The keyboard/monitor is also unresponsive again so I can't even run diagnostics. (blinking cursor but accepts no input)

@itimpi Thank you! I will try to capture some diagnostics after this fresh install and see if the issue persists. I really appreciate the help.

I had looked at that link, I actually just removed the USB and fresh installed unRAID with the media creation tool and it seems to be better already. Here is hoping

@itimpi It is letting me post it in this comment luckily but here it is. @Squid I just realized it was the uptime timer, I am assuming it is kept client side which is why it worked. I will say I just attempted to run this from the unRAID OS gui and it actually freezes when I start the array and forced me to shut down which is why it goes offline. Which makes a lot more sense but I still don't understand why. krakenhaus-diagnostics-19991231-1634.zip

Hello Everyone, I am attempting to set up my first unRAID server and I am having problems starting my array. Here are a list of my specs: Motherboard: Asus Z10PE-D16 WS CPU: 2x Intel Xeon E-2697 SR1XF RAM: 4x32 Crucial DDR4 Dual Ranked ECC Memory Storage: 1x 1TB Samsung 970 Evo m.2 nvme 4x Western Digital 1 TB WD Blue SN570 NVMe SSD GPU: Asus GT 710 I have tried to attach my diagnostics file and it fails to upload. Here is a link to it: https://drive.google.com/file/d/1aC6jYiKiO8zB2QTKcIMxEQSx3Ere9abs/view?usp=sharing When I go to the web console I set my parity drive as the Samsung NVMe and I set the disks to the four WD NVMe's. I then hit start array and a timer appears at the top and the unRAID logo begins to move on screen. If I open another tab and attempt to navigate to the url the server has disconnected from the network and it is unreachable. I am directly attached to the server via gpu/keyboard and it shows a blinking cursor but I cannot type into it. As such I leave the tab with the unRAID logo running in hopes that it will reconnect after. I cannot see any progress at all and my current attempt has been running for over 26 hours. The last time I tried it ran for 18 hours and I stopped it to restart my machine because I read somewhere that it should not be disconnected from the network and I should be able to see a completion bar of some kind. I am at a loss for what to do. Should I continue to let it run? Did I do something wrong? Any help would be greatly appreciated.