ajgoyt

Members
  • Posts

    171
  • Joined

  • Last visited

Everything posted by ajgoyt

  1. To add the unique identifier is showing fine, just the vendor is not. TOM Any ideas?
  2. Hello when i click on the get trial key it takes me to the start trial window - but the start trial is not clickable, the eula/privacy policy are readable and i am on the net, as i can surf the web or click on the buy and it will take me to the buy section. But i would like a 30 day trial. is the get trial not working with the latest 6.8.0
  3. thanks that was it... you the man
  4. Hello running stable 6.6.6 PRO with a total of 21 disks. I recently added a bigger parity drive to my array and while running a parity check, i precleared the original parity drive. after the parity check was done i rebooted the server and wanted to add a new share to disk 20 , when i am in the add share screen i add the typical items , name etc and i wanted to designate the share to disk 20 under (included disks) when i drop down the included disks the menu only shows 16 disks, Disks 17-18-19-20 are part of the array. What am i missing or is this a bug in 6.6.6
  5. A new 4gb drive worked multiple times from shutdowns to restarts with no issues, have an email into Tom for the process to retire my 8year old flash drive.... thanks
  6. Once you get the files on the server you can use MC (Midnight Commander) to move files within the server without the overhead of windows machine, - see this article about MC - https://wiki.unraid.net/index.php/Transferring_Files_Within_the_unRAID_Server
  7. Since your cache drive is only 250g and your moving huge files, you would be better off to move your files direct to the 8TB actual drives. The Cache will work with big files but it takes time and IMO is meant for lots of smaller files..... I Assume your transferring from a windows PC to your server Teracopy works good for transferring lots of files to cache or direct to other drives. hope this helps.
  8. Server stuck on Bzimage on startup - Have noticed this anomaly for awhile when rebooting after an OS upgrade, I cringe when rebooting as it takes 3 or more hard resets to finally get past this error. Sometimes the cursor dots will loading go half way or 3/4 then then it stops or freezes. Just upgraded the server tp 6.6.1 this morning and it took 5 resets before it got past the freezing at the Bzimage. I have noticed this with multiple versions of Unraid going back to the 5x. Could it be my Kingston thumbdrive? I have posted my diagnostics - please advise as this is pretty annoying. Thanks tower-diagnostics-20180928-0441.zip
  9. Hello what forum would i post in for an issue with this latest version? Probably self induced but need help with my friends server.
  10. WOW checked into Backblaze 50tb =3k year - I dont think so :(
  11. Quick question - is Crashplan Pro still a good deal for the $10 month - $120 year? Not really other options with docker for Unraid? Thanks in advance!
  12. Now i recall that's all i need to do on a MB swap...Took a screenshot of the disk identification, going to swap the components...
  13. Thanks kind of what i thought more cores and ram - other than taking a screen shot of the main window for disk identification before moving over the drives etc do you recommend any other tasks before swapping over to the new machine?
  14. Guys I have 2 Supermicro SC846 SAS 2- 24 bay hot swap machines - I am currently running only one and the thought originally was too have a backup. for now the backup financially will have to wait. I am wondering if i will have a noticeable performance upgrade for Plex and possible Vm's later - for reading and writing to the Dual Xeon server setup? More Cores and Ram and a little bump in GHZ seems too me that its a No brainer your thoughts? My current system Chassis -SC846 - SAS 2 Backplane MB - AsRock - Z97 Extreme 6 CPU - Intel I7-4790K @ 4.00GHZ Ram - 32GB Patriot 2400mhz Ram NIC - Mellanox 10gbe network card Sata Expander - LSI Logic / Symbios Logic SAS2008 PCI-Express HD - 20 drives and (2) SSD Cache drive pooled. Upgrade to this system? Chassis -SC846 - SAS 2 Backplane MB - SuperMicro - X9DRL-3F/IF CPU - Dual Xeon E5-2665 @ 2.40GHZ Ram - 64GB - Samsung DDR3 ECC NIC - Use from Current System - Mellanox 10gbe network card Sata Expander - Use from Current System LSI Logic / Symbios Logic SAS2008 PCI-Express HD - Use from Current System 20 drives and (2) SSD Cache drive pooled.
  15. Hi new install of Unraid 6.4.0_rc10b - I cannot seem to download the CA , I pasted the url from page 1, and it just sits there... I am on my win10 machine trying to install from the gui .. see the picture , please advise what i am doing wrong. just tried the fix common problems plugin and it does the same thing as the picture below. it's like i am not connected to the net....
  16. You the Man ---- Basics Dammit ... it's been so long since i created a NEW flash drive......... i put the USB to NTFS ... THANK YOU
  17. I know for sure its NTFS - i forgot to put it FAT32 - I will try in a bit... thanks
  18. 1st time boot with a new build - running unRAIDServer-6.3.5-x86_64 on the flash drive boots fine and assigns an ip - i pick gui mode and it's unable to connect from the gui screen. have two NEW data drives , Just cannot get to the gui screen , or to the ip it assigned from another pc 192.168.1.243 , a little help please. I can go to google and surf - just cannot get to the admin/gui screen. thanks
  19. Confirmed both drives are DOA - will not show up in my server under assigned - He did have another 10tb Gold with data on it and it reads just fine on my server and his new server with the Y-cable. not sure where my friend got these (2)10tb drives but will have to get them replaced.
  20. I saw that and that's why i tried the sata power y-adaptor off of molex, Going to install one of the drives in my unraid server and see if they are recognized.
  21. I thought the same thing but leaving the MB out of the picture for a moment i tried a quick test with molex with a y adaptor or the other sata power lag, i just plugged in power only and both drives dont spinup in hand where the 2tb will. that eliminates the MB at the moment, and confirms the PS is supplying enough power for the old 2tb. Does WD have some sort of protection - if the sata side is unhooked they wont spin up?
  22. I am building a new server for my friend who cannot as he is disabled. We picked out all of the hardware and the motherboard won't even see these NEW 10tb drives when booting unRAIDServer-6.3.5-x86_64 , the Bio's wont even see these NEW drives. I then switched sata ports on the MB and still nothing, I confirmed both (power/sata) cables are working by trying an old 2tb drive and it sees the old 2tb fine with both cables. I cannot see both 10tb drives being bad out the box, What am i missing they just don't spin up? MB Asrock Z270 Taichi Ram 32gig gskill DDR4 Thermaltake 750watt tough power with molex and sata connectors Gforce 9400 vid card DVD drive
  23. Rebooted/Shutdown , for what ever reason WALLAH it works reset the interface rule for ETH0 for the Mellanox and rebooted and all is good..... not sure what changed - At work i call this F*$#@ Magic! AJ