mv_dev

Hi everyone, I tried the new macinabox but the vm seems to be locked, in the vm log there are those strange error on the CPU "host doesn't support requested feature: CPUID.07H:EBX.". I'm running a 5950x with a Rx6750xt, there are some incompatibility problems with amd?

At this point I’m thinking the same, I will mark the post as a solution for anyone in the future who possibly needs it but because I don’t have another pay on hand I will update this post when I have a new psu. Thank for the help

I have 4 disk SATA connected directly to the psu cable but only 2 disk on a 4 SATA PW cable to split up the load. The other 3 disk are connected via Molex because are SAS. I tried power those SAS with SATA PW and Molex. Now to split up 3 SATA on one cable, one SATA and one SAS on another and the last two SAS on molex. Still problem, now on the two disks: the SATA and SAS one in one cable. I don’t know how to do to fix it

Nothing, I swapped cable, disks and ports and now it seem like a disk is starting and stopping. At this point I’m pretty sure that is a psu issue but for an array of 7 disk I don’t know how much big need to be a psu. I have a 650w and in a parity rebuild is using about 200w from the wall and with a vm I have never seen over 300w. For me it is really strange

I have already swapped the cable, if it is not the disk the problem is on the psu, the SAS HBA or the cable. But of the three I don’t know where is the problem

Yesterday the Parity reconstructed without error, today I boot up the server and same problem. mv-diagnostics-20240808-1432.zip

But I need to get another drive and rebuild the parity again?

Hi, around a week ago the parity drive was disabled, so I took another one and started to rebuild it. It finished without any problems in 11 hours. Today I got a notification about a disk disabled in the array and the parity disk that I changed was disabled. I don’t have any idea for what is the problem config: HBA: Dell PERC H310 SAS (FW 20.00.00IR) Drive: ST6000NM34 SAS (Precleared and verified without error) Cable: SAS SFF-8087 to 4x SFF-8482 Molex PSU: Cooler Master MWE-V2 White 650W mv-diagnostics-20240806-1411.zip

Hi, today I started up nextcloud after a week and it won’t start because the data is from NC 25 and yesterday it was automatic updated to NC 27. I use appdata backup v2.5, it’s possible that rolling back a backup of appdata can fix the problem or I need to reinstall NC? The backup was from 20/06/2023 thanks

Diagnostic mv-diagnostics-20230619-1653.zip

Diagnostics mv-diagnostics-20230619-1653.zip

After many months I continue to have this problem that I already make a post, can anyone know the problem?

Hi, I have a RX 6750 XT that I bought for vm gpu passtrough. But it didn’t work: I tried “multifunction” in the XML, YouTube tutorial and any AMD driver. When I start the vm and arrive at the Windows desktop 2/3 minutes and the whole server crash. Can anyone help?

Hi, I use a W11 vm with gpu passthrough from about a month and was working great. A week ago I started the vm and when I arrived at the desktop and start typing on the keyboard the server crash, but only with the keyboard because the mouse work. When the server restart Fix common problem notify me about Machine Check Events I don't have idea what to do, any help is really needed Thanks Config: Ryzen 5950x (8 core to vm) Asus ProArt x570 32gb ram 3600 (10gb to vm) RX 6750 XT note: I have a Kvm switch but the problem work also without

Ok, thanks So no hdd light, but it’s not my priority