vohk

That would make sense. The board is getting pretty ancient.

Good thought- I've tried 3, 1x3.0 and 2x2.0 ports- same error, only different usb/port number listed. And I am certain all 3 ports are fully functional, with previous versions of UNRAID and other OSs.

waiting up to 30 sec for device with label UNRAID to come online ... xhci_hcd 0000 :00 :10.1: Error while assigning device slot ID xhci_hdc 0000 :00 :101.: Max number of devices this xHCI host supports is 32. usb usb8-port1: couldn't allocate usb_device not found - press ENTER key to reboot ... After updating UNRAID through the web interface, both with 6.11.0 and 6.11.1, the system fails to boot with the above message. No hardware has been changed and the system was running and booting fine on 6.10.3 previously. I was able successfully flash a 6.10.3 backup after this occurred with 6.11.0. Any suggestions on where to start troubleshooting would be appreciated. I didn't notice any relevant logs but I have a full copy of the flash drive archived. edit1: Testing with a clean 6.11.1 USB (all default settings) results in the same error, so it seems to be an issue with 6.11.1 and my hardware rather than my existing configuration. edit2: system specs: AMD A8-7600 Radeon R7 ASRock FM2A88X-ITX+

Having a similar as described above. Diagnostics attached. Hit start, Unraid progress animation shows for a few seconds, page refreshes. Status never changes from 'Stopped'. Ah, figured it out. Plugin will not start if "Enable for Cache and Pool Disks?" is set to "Yes". Seems to be working if toggled off. box-diagnostics-20220317-1251.zip