Frank H
Members
-
Joined
-
Last visited
-
Moving to another bay did not work. I went ahead and did the rebuild on itself procedure. Which enabled the drive back again. Problem solved.
-
JorgeB Thanks for the reply. I have checked cables and power connections twice. I am able to spin down and spin up the drive from the GUI. All disk info does show under disk settings. I will look at moving the drive to another bay and post the results.
-
Hardware info: Version 7.12 Pro MB - ASROCK E3C236D21 Mem - 32G ECC Drive - (4) 4TB WD CPU - Intel Xeon E3-1240 v5
-
Greetings Tried to replacing disk 1 (9 years old) with a new 4 TB disk, but the new disk appeared to be bad. (clicking noises) I re-installed disk 1 and added it back to the array. Now disk 2 is showing disabled. Per S.M.A.R.T. test disk 2 look good. Attached my diagnostics and smart report Not sure where to go from here. Did several searches, but did not come up with any good answers. Maybe have disk 2 erased and see if it can be re-built. Frank.... tower-smart-20250528-0744.zip tower-diagnostics-20250528-0852.zip
-
Greetings Issue: I'v been trying 6.7-rc2 and 6.7-rc3 and notice server USB keyboard does not work after UNRAID boots and shows a login prompt. I know it's not the keyboard, it works find when in the BIOS setup. Also the IPMI (iLO) remote control keyboard does not work either after UNRAID boots. Solution: Down graded back to version 6.6. Attached USB keyboard and iPMI both function as expected. The "ENTER" key now does nothing after UNRAID boots up in normal/safe mode. It used to refresh the login prompt when you hit enter in prior versions. I mistook it for the system being hung and the keyboard was not working at all. You can enter the login name "root", the "ENTER" key works as normal. tower-diagnostics-20190213-1840.zip