song

When using ovmf to install windows, after you start the windows virtual machine, you need to quickly enter the VNC remote desktop. When there is no screenshot of you, you need a few seconds to press any key on the keyboard, which will directly enter the windows system installation interface. If you miss this time, you will enter the screenshot of you. If you enter this interface, you need to forcibly shut down the windows virtual machine, Restart the windows virtual machine and follow the above steps. Do you understand?

When you select "ovmf" as the BIOS of the virtual machine, you can quickly enter the VNC remote desktop when windows is turned on. Press any key on the keyboard to enter the system installation interface. In about three seconds, it will enter the interface you pointed out. You can force the virtual machine to be turned off and turned on again. Quickly press the Enter key or any other key on the keyboard to enter the installation interface!

Thank you for your attention. I have tried and fed back the results of the solutions you mentioned. The way I expressed may confuse you because my English is not good. Thank you for your patience. I hope you can help more people without me. Goodbye

Today, I rolled back to version 6.92 again. Everything was normal when I installed windows. The graphics card worked normally and the graphics card driver was installed normally. I tried to install the graphics card driver in version 6.92. I restored the system backup of unriad to 6.10.3 and tried to make windows work normally in this way. However, it is a pity that after the system was restored to 6.10.3, I entered the windows system, and the graphics card did not work normally, prompting an error message of 43, It can run normally in version 6.9.2. Therefore, this is caused by the system. I have the system backup of 6.9.2 and the system backup of 6.10.0, 6.10.2 and 6.10.3. If you need some files in my backup to compare different versions, I can provide them to you!

It seems that you haven't read my previous speech. I have already explained that in the unraid version 6.10, you can create a Windows virtual machine and allow the graphics card to output pictures to the display. However, the resolution is very low because the driver of the graphics card reports error 43. I have tried the official driver of NVIDIA. Both the latest version and the old version have tried. The same problem cannot be solved, The "vfio PCI. Ids=10de:11c6,10de:0e0b, 8086:43d28086:15288086:43878086:f0c88086:43a38086:43a4" added in the USB boot will cause the pass through hardware to fail if I delete them!

Can't you give us the option to choose the old version of the kernel when installing windows? I bought the genuine unraid. Can I only use it in version 6.9.2 forever? Or do I have to spend more money to buy new graphics cards to be compatible with your new VM kernel?

At present, I know that there are three types of graphics card with problems: "GT 710, GT 740, GTX 650ti“

Because the server needs to run 7x24 hours, the power consumption of the new graphics card will be particularly large. The power consumption of the old graphics card is relatively small, which is suitable for running on the server

My graphics card is gtx650ti. It seems that there are more old graphics cards with this problem

I have seen similar problems in the Chinese sub forum. He said that such errors will occur when the VM kernel is upgraded to version 5.14 or higher. He can also roll back to version 6.92 and install the graphics card driver normally. I suggest you collect the recent 43 error messages from the graphics card. I have found at least five similar problems in the forum

Upgrade version: 6.9.2>6.10.1>6.10.2>6.10.3. The allocation of hard disk space for reinstalling virtual machines started in version 6.10.3. Because these virtual machines have been installed in version 6.9.2. The virtual machine files configured in version 6.10.1 and 6.10.2 are used in version 6.92, so they can run normally. Now I have installed windows from version 6.92, installed the graphics card driver, and can run normally in version 6.10.3, However, in version 6.10, when a new windows virtual machine is created and a graphics card driver is installed, an error 43 will be reported. I wonder if you can understand my expression

I upgraded from version 6.92 to version 6.10. Before upgrading, Mac OS, Ubuntu and windows were all configured in version 6.92. After upgrading to 6.10, they can run normally. Because my hard disk capacity is small, I allocated too much hard disk space to these virtual machines, so I need to reinstall them and reallocate the hard disk space. Both Mac OS and Ubuntu have been reinstalled, They can work normally and use my graphics card until this error occurs when installing windows. I have repeatedly installed it for many times and tried many methods. Only by rolling back to version 6.92 can windows install the graphics card driver normally

Thank you. But in version 6.10, there is no problem with Mac OS and Ubuntu using my unique display. Only windows has the problem of installing driver error 43. I saw someone posted a post on the forum stating that the new version will cause the installation driver of the windows graphics card and the appearance of 43 code because the kernel of the upgraded VM is higher than 5.14!

I have never used the "VBIOS" of the graphics card in version 6.92. It can run perfectly. Once I use the VBIOS of the graphics card, it will lead to the paralysis of the entire server, requiring forced shutdown and restart. The windows system graphics card I installed in version 6.92 runs normally. If the windows virtual machine is not deleted and upgraded directly from version 6.92 to version 6.10, it will run normally in version 6.10. If I create a new windows virtual machine in version 6.10 and use my graphics card to install the graphics card driver, it will have 43 errors! In version 6.10, my "Mac OS and Ubuntu" can normally use my unique display. I do not provide VBIOS with a graphics card for "Mac OS and Ubuntu". They can run normally. In version 6.92, I also do not provide VBIOS with a graphics card for windows

My CPU model is "i5-10500 es version". These error messages did not appear when I upgraded to 6.10.3. Today, in order to test whether my gtx650ti can work normally in version 6.92, I rollback to version 6.92. I am happy to tell you that in version 6.92, my graphics card can be normally used in Windows and the driver of my graphics card can be installed normally without 43 errors. After verification, I restored the system backup of 6.10.3. I regret to tell you that in version 6.10, the graphics card still does not work, and 43 errors are prompted when installing the graphics card driver, so I checked the log and found the log information of these errors, which I have never seen before

OK, I have uploaded the diagnostic information file. I haven't changed the hardware configuration. Because my graphics card gtx650ti installed the windows graphics card driver in version 6.10 will prompt error 43, so today I restored to the system backup of version 6.92. I found that windows can normally install and use the graphics card driver in version 6.92. After testing and comparison, I just restored to the backup of version 6.10, These error messages appear only after viewing the logsong-diagnostics-20220616-2104.zip

This error has not occurred before. It just appeared today. I sent you the system log file. Can you tell what hardware went wrong? The information level of my log is "fatal"

What do these error messages mean? This error message appears every time the system is restarted

Could you tell me if the question I raised yesterday about installing the driver prompt 43 for windows graphics card has been shelved? Why is there no solution? When I go back to version 6.92, I can normally use the independent display output screen. This will happen once I upgrade to version 6.10! Do I want to stay in version 6.92 forever? I bought the genuine version for the convenience of upgrading the system. Why should so many problems be released in the new version! Why don't you do a good job of testing and release the genuine system? I have never used the beta version! Because I need it to work steadily! Why are there so many problems with the stable version? Version 6.92 can be used normally, but it cannot be used after upgrading to the official version 6.10?

Could you tell me if the question I raised yesterday about installing the driver prompt 43 for windows graphics card has been shelved? Why is there no solution? When I go back to version 6.92, I can normally use the independent display output screen. This will happen once I upgrade to version 6.10! Do I want to stay in version 6.92 forever? I bought the genuine version for the convenience of upgrading the system. Why should so many problems be released in the new version!

Thank you. My NVIDIA graphics card gtx650ti can run normally in unraid version 6.92. Windows can use the independent display output screen. The problem occurred only after upgrading to version 6.10. Therefore, it should have nothing to do with the BIOS of the graphics card. In addition, I can now use version 6.10 to give "Mac OS" and Ubuntu can use the unique display output screen. Only windows has the problem of 43. I see that many people in the forum can use the graphics card in version 6.92, and the problem only occurs after upgrading to 6.10. Therefore, this should be caused by the unraid system

I also have the same problem. In version 6.92, "Mac OS, Ubuntu and windows" can all work normally. After upgrading version 6.10, "Mac OS and Ubuntu" can normally drive the independent display. Only windows has an error. The graphics card can output pictures to the display, but the installation of the graphics card driver will send an error 43. I tried to rollback to version 6.92. Everything is normal. The independent display can be used normally

Is there a solution? Rolling back Mac OS, Ubuntu and windows of version 6.92 can be used normally. Is it difficult to roll back to version 6.92? For this matter, I tossed until 4 a.m. last night. Why didn't 6.92 make such a mistake?

Ok, I've uploaded itsong-diagnostics-20220615-1918.zip