song

Yes, it still won't turn off the monitor, requiring me to turn off the monitor every time.

After unRAID is restarted, the display cannot be closed again. I hope that in 6.10, UNRAID can stop output to the display as in 6.92, and install "intel-GVT-G" plug-in in 6.92 to stop output to the display. But in version 6.10 it won't stop output, which annoys me a lot!

I am sorry that I did not check forum messages online because I was busy recently. I used the plug-in of "Unassigned Devices" to mount my Synology shared SMB folder. The error log of the UNRAID system happens every day, and the log content is the same.

Since unRAID was upgraded to version 6.10, these error messages are always displayed in the system logs. May I ask what causes this? “ May 23 12:43:25 song nginx: 2022/05/23 12:43:25 [error] 4663#4663: *287705 recv() failed (104: Connection reset by peer) while reading upstream, client: 192.168.50.13, server: , request: "GET //wsproxy/5703/ HTTP/1.1", upstream: "http://127.0.0.1:5703/", host: "192.168.50.254" ”May 23 04:27:59 song nginx: 2022/05/23 04:27:59 [error] 4663#4663: *826 limiting requests, excess: 20.885 by zone "authlimit", client: 192.168.50.19, server: , request: "GET /login HTTP/1.1", host: "192.168.50.254", referrer: "http://192.168.50.254/"

Unraid has now stopped output to the monitor without me changing any Settings. May 22 03:56:57 Song kernel: CIFS: VFS: cifs_setLK failed rc=-5 ". Do you know what this is? This message appears every day!

When the server starts up. I didn't make any choices, the first option is loaded by default, OS.

I do not want to roll back to version 6.92, I hope to solve my problem in version 6.10. In addition, I hope to solve the docker permission problem I mentioned just now. Many containers cannot read data in hard disk, which is very troublesome and even impossible to solve, I hope to add a special permission setting function.

I'm sorry that my English is not very good, the meaning may be expressed, so that you are confused, I know the detailed operation of rollback system version, I mean when I roll back system version. Copy the backup "config" folder to the USB disk for overwriting, and insert it into the server to open the system

Means can not enter the system, in the boot interface will keep running code!

I have tried this method before. When I copied the config folder to the USB disk and overwrote it, I inserted it into my server and started it up. I would brush the code frantically and kept brushing the code. I had to force my host to shut down because of this problem. I hope to be able to turn off monitor output by default in 6.10, as in 6.92

I can't roll back to 6.92 now, if I want to roll back, I have to reinstall 6.92, which would be very troublesome, here are the topics I posted in other sub-forums, no one has answered them yet. In addition, I hope you can pay attention to the docker permission problem I feedback! "Hello, my previous UNRAID server was version 6.92. After installing the "Intel-GVT-G" plug-in, I can stop UNRAID output to the monitor. UNRAID has released stable 6.10. When updating, it was found that the display could not stop output after installing the "Intel-GVT-G" plug-in and kept working. The monitor displays UNRAID code all the time. How to solve this problem, because it will affect the efficiency of emby decoding video "

Yes, thanks to the moderators to answer my question, but I have another question about 6.10 after the upgrade, can't stop the display output images, has been two days, no people to answer for me, it makes me very confused, because this issue has the serious influence to my experience, I hope I can close my monitor like version 6.92, Instead of me having to unplug the monitor every day. I'm already can't back to version 6.92, can re-install version 6.92, it will be a very troublesome thing, in addition, our group a lot of people after the upgrade version 6.10, are the docker permission problems, unable to read from the hard disk data files, we hope you can join the next version with special permissions Settings, When we deal with permissions, we encounter a lot of thorny problems. If we can't solve them, we want to give up the system! So far there are 1000 people in my group after the 6.10 update. More than 100 people have been discussing the issue of permissions every day, and everyone is very anxious! Hopefully my feedback will make a difference!

In addition, I would like to ask, after upgrading the official version 6.10, my monitor cannot be turned off, and the monitor keeps outputting codes. Is there any way to turn it off? In version 6.92, after installing the "Intel-GVT-G" plug-in, the monitor connected to UNRAID will be turned off by default.

Ok, thank you very much

Ok, thank you very much. How can I update the firmware after Samsung releases it?

Thank you for your reply. May I ask if the hard disk reached 84 degrees, is it a false positive? Or is it real? Is there anything I need to do? Or ignore the alarm?

Since I bought unRAID. In the use of problems in the forum for help. Makes me feel like your custodians are doing nothing! I consulted the author of "Intel-GVT-G" at that time. He was able to answer my questions in the first time, which made me feel that you were very efficient in solving user problems. When I went to the sub-forum to publish the problem and ask for help, I thought I was wrong. You completely ignored my question and didn't give any answers at all.Can you really help users solve their problems? I feel that your management is not as active as the plugin authors in addressing user concerns. I regret buying unRAID now

When UNRAID was not upgraded to 6.10, the temperature of my SSD reached 48 ° C. When I upgraded to 6.10, the temperature reached 84 ° C at 4am. I checked the system log and found that there were no tasks executed at 4am. My hard disk is Samsung 980. Is this a bug in unRAID 6.10

INTEL-GVT-G

Hello, my previous UNRAID server was version 6.92. After installing the "Intel-GWT-G" plug-in, I can stop UNRAID output to the monitor. UNRAID has released stable 6.10. When updating, it was found that the display could not stop output after installing the "Intel-GWT-G" plug-in and kept working. The monitor displays UNRAID code all the time. How to solve this problem, because it will affect the efficiency of emby decoding video

Ok, thank you very much

If I uninstall this plug-in, can I have unRAID turn off the display output?

If I uninstall this plug-in, where do I set up the virtual machine to assign virtual core display?

What do you mean by that? Do I need to uninstall this plug-in?