atsrxL

Should I post this topic to bug report forum?

Hi there, I newly bought a ugreen DXP4800PLUS which have a intel 8505 CPU whth IGPU. I'm using IGPU to run hardware acclerator for Frigate streaming and object detect. got a issue that /dev/dri will disappear randomly probobily because there are some action used the igpu like start/stop frigate, on/off a VM with sr-iov igpu bounded. Device "/dev/dri" could be reappear by typing : echo 1 > /sys/bus/pci/rescan , But the render name may change form D128 to 129 whth normal Syslinux, the dmesg: I tried add "intel_iommu=igfx_off" to Syslinux , but help nothing. here is the dmesg dump: Can any please help me with the issue , Thanks a lot. dxp4800plus-diagnostics-20250519-1731.zip

Yeap, I tried ssh to synology and modified its upsmon.conf , then ran upsmon , it worked . but in the webui setting it will overwrite config. I'll try some workaround when I'm spare. Overall, very thankful to you for solving my problem.

The another requirement of synology slave is that ups name should be "ups" other than "qnapups" , I tried add a [ups] section in ups.conf with same port , its won't work.

Synology will also work as ups name:ups username:monuser pass:secret , but the tricky thing is this , a nut server can't use two identifaction at same time , thus I'm trying to use SNMP ups mode if NUT can provide.

Hi sorry for bother you again, Is Nut work as SNMP ups server ? I have a Qnap nas and also a Synology nas , set Nut as netserver with qnap default username and password would work fine, but on synology it only give the option of USB / SNMP and synology serverd nas as source. any suggistion?

sorry for the reply , it works , forgot to enable the service on/off switch, thanks very much

Had tried but still not working

Model : UPS2000-A-3KTTS https://support.huawei.com/enterprise/en/doc/EDOC1000084260 Here the newer debug package nut-debug-20231025001422.zip

Thanks for reply , the pic of showing elder backend is just a try, does't work also on the default backend, and based on huawei's ups menu i'am sure that modbus is on, any other suggistion?

Hi , I'm using a huawei UPS which use ModBus a protocol as connection method, I noticed on the newest version of Nut can select UPS Driver to apc_modbus , when I choose and set Driver port to USB or /dev/ttyUSB0 in standalone mode also keep other setting default , it does't work . there are no any information on screen only ''status:service stopped'' at right corner. Can you please give a hand on this ,thank you. nut-debug-20231024235612.zip