marco_yang

Thanks Jorge, the USB is no longer in the boot list so I suppose it is dead😭. I also checked the manual to see how to replace the USB, it says I can use the "USB Creator" to write a new one. I have the most recent flash backup on my Synology NAS, but it is more likely to be a direct copy of flash file on my UNRAID rather than the regular "main > flash device settings > flash backup". Do you think I can still use "USB Creator > Local Zip" to rebuild my USB?

Tried to reboot again via KVM, still showing same thing.

Hello commnity, here I got a problem. My unraid server were running perfectly fine (reboot was of course smooth). Today, when I updated my server from 6.12.8 to 6.12.10, during the required rebooting process, it didn't wake up and the screen says this: I currently live aboard and controlling my unraid via the KVM on my motherboard, do I still have any way to fix this issue? Thanks so much.

Okay I don't know why but it just start downloading

Hi all! Today I reset my router so some of my internet config has changed. I believe my internet is accessible ( I can visit CA and check docker discription, icons, authors etc.) but once I download plugin "IPMI Tool" it says Is this a DNS config error? I tried "8.8.8.8" and "114.114.114.114" (this is the free DNS server in my country) but both failed. Happy Dragon Boat Festival! northernlight3s-diagnostics-20230621-2054.zip

@JorgeB Here is the output: root@NorthernLight3s:~# zfs get all cache/software NAME PROPERTY VALUE SOURCE cache/software type filesystem - cache/software creation Tue May 23 11:56 2023 - cache/software used 96K - cache/software available 231G - cache/software referenced 96K - cache/software compressratio 1.00x - cache/software mounted no - cache/software quota none default cache/software reservation none default cache/software recordsize 128K default cache/software mountpoint /mnt/cache/software inherited from cache cache/software sharenfs off default cache/software checksum on default cache/software compression off inherited from cache cache/software atime off inherited from cache cache/software devices on default cache/software exec on default cache/software setuid on default cache/software readonly off default cache/software zoned off default cache/software snapdir hidden default cache/software aclmode discard default cache/software aclinherit restricted default cache/software createtxg 320027 - cache/software canmount on default cache/software xattr sa inherited from cache cache/software copies 1 default cache/software version 5 - cache/software utf8only on - cache/software normalization formD - cache/software casesensitivity sensitive - cache/software vscan off default cache/software nbmand off default cache/software sharesmb off default cache/software refquota none default cache/software refreservation none default cache/software guid 15239827051366107895 - cache/software primarycache all default cache/software secondarycache all default cache/software usedbysnapshots 0B - cache/software usedbydataset 96K - cache/software usedbychildren 0B - cache/software usedbyrefreservation 0B - cache/software logbias latency default cache/software objsetid 396 - cache/software dedup off default cache/software mlslabel none default cache/software sync standard default cache/software dnodesize auto inherited from cache cache/software refcompressratio 1.00x - cache/software written 96K - cache/software logicalused 42K - cache/software logicalreferenced 42K - cache/software volmode default default cache/software filesystem_limit none default cache/software snapshot_limit none default cache/software filesystem_count none default cache/software snapshot_count none default cache/software snapdev hidden default cache/software acltype posix inherited from cache cache/software context none default cache/software fscontext none default cache/software defcontext none default cache/software rootcontext none default cache/software relatime off default cache/software redundant_metadata all default cache/software overlay on default cache/software encryption off default cache/software keylocation none default cache/software keyformat none default cache/software pbkdf2iters 0 default cache/software special_small_blocks 0 default I have the following things run at midnight: 1. 23:50 PM my Synology server (under the same network with my UNRAID server) will power on 2. 23:55 PM my UNRAID server will use "user script" plug-in to make a direction under "/mnt/remotes/" and then mount my Synology server share folder to this location 3. 00:00 AM my UNRAID server will: check disk SMART information start cache mover start to use "Appdata backup" plug-in to backup my dockers and flash my Synology server will: start to backup shared folders via "Active backup for business" 4. 02:00 AM my Synology server will power down

I also want to mention that this problem seems only occur when UNRAID server already runs for a period of time. When I just reboot, it seems I can upload and download as normal. But some time (last time it was a few hours after reboot, but this time it was almost 5 days) later this problem will happen and I will not be able to manage my files.

@JorgeB Hi thanks for your reply! I really appreciate your help!!! Here is the out put: NAME USED AVAIL REFER MOUNTPOINT cache 5.21M 231G 96K /mnt/cache cache/a 96K 231G 96K /mnt/cache/a cache/else 96K 231G 96K /mnt/cache/else cache/kelsey 96K 231G 96K /mnt/cache/kelsey cache/photo 96K 231G 96K /mnt/cache/photo cache/software 96K 231G 96K /mnt/cache/software media 210G 650G 104K /mnt/media media/music 210G 650G 210G /mnt/media/music sys 305G 1.38T 144K /mnt/sys sys/appdata 37.9G 1.38T 37.9G /mnt/sys/appdata sys/docker 4.05M 1.38T 4.05M /mnt/sys/docker sys/domains 205G 1.38T 205G /mnt/sys/domains sys/isos 45.0G 1.38T 45.0G /mnt/sys/isos sys/system 17.0G 1.38T 17.0G /mnt/sys/system sys/work 61.7M 1.38T 61.7M /mnt/sys/work I tried to set "Array" as primary, and "none" as secondary, and then upload works fine! Do you think this may be a BUG or something because I am using 6.12.0-rc6?

Problem: cannot save files to UNRAID server Hello everyone, mine UNRAID was working fine but today I got a serious problem where none of my files can be uploaded to the server anymore. I've been trying to use docker "File Browser", plug-in "Dynamix File Manager", as well as the WEBDAV & SMB sharing from windows, but none of them works. When I was trying see the syslog, it appears that the system was reporting: May 29 19:24:56 NorthernLight3s shfs: command failed: 1 Anyone has any idea? northernlight3s-diagnostics-20230529-1937.zip

I was trying to have a 10min delay on auto mount remote drive to my unraid everytime the array start. The drive I intended to mount is actually a share from my VM. I need a few minutes after the boot to let the VM start. I had the following script but didn't work. Do you find any problem on my script? It didn't work. #!/bin/bash # Wait for 10 minutes before attempting to mount the shared drives sleep 600 # Define the shared drive information nl3s-vm-dsm="//192.168.4.172/nl3s_appdata backup" nl3b="//192.168.4.216/nl3s_appdata backup" # Mount the shared drives mount -t cifs -o username=marco,password=19980928MMCmmc "$nl3s-vm-dsm" /mnt/remotes mount -t cifs -o username=marco,password=19980928MMCmmc "$nl3b" /mnt/remotes # Verify if the drives are mounted successfully if mountpoint -q /mnt/remotes; then echo "Shared drives mounted successfully." else echo "Failed to mount one or more shared drives." fi northernlight3s-diagnostics-20230524-2340.zip

I was trying to have a 10min delay on auto mount remote drive to my unraid everytime the array start. I had the following script but didn't work. northernlight3s-diagnostics-20230524-2340.zip

I'd say 16gb is definitely not enough if you plan to run VMs. Start with at least 32gb.

Oh and I am not sure if 13900K's igpu can be used to codec in plex or jellyfin right now

These are very powerful hardware. The only problem I can think about is expandability. Your Z790 mobo comes with one PCIE_X16 slot and dual PCIE_X4 slots. You said you want to run 1-2 VMs on this machine, assuming you plan to add a graphic card on PCIE_X16, then you only left two PCIE_X4 slots for your future 10Gig card and SAS controller cards for sata expansion(you already used all 6 SATA ports on mobo). 10Gig cards on x4 is more expensive and most SAS controller cards are running on x8. An alternative would be mobo with on-board 10Gig ethernet ports, which will save you a pcie slot. Then use sata expansion card if you want to add HDDs in the future.

There's a plug-in called file activity which monitors the file moving. I am not sure if it can help but worth a try.