marco_yang

Members
  • Posts

    31
  • Joined

  • Last visited

Everything posted by marco_yang

  1. Okay I don't know why but it just start downloading
  2. Hi all! Today I reset my router so some of my internet config has changed. I believe my internet is accessible ( I can visit CA and check docker discription, icons, authors etc.) but once I download plugin "IPMI Tool" it says Is this a DNS config error? I tried "8.8.8.8" and "114.114.114.114" (this is the free DNS server in my country) but both failed. Happy Dragon Boat Festival! northernlight3s-diagnostics-20230621-2054.zip
  3. @JorgeB Here is the output: root@NorthernLight3s:~# zfs get all cache/software NAME PROPERTY VALUE SOURCE cache/software type filesystem - cache/software creation Tue May 23 11:56 2023 - cache/software used 96K - cache/software available 231G - cache/software referenced 96K - cache/software compressratio 1.00x - cache/software mounted no - cache/software quota none default cache/software reservation none default cache/software recordsize 128K default cache/software mountpoint /mnt/cache/software inherited from cache cache/software sharenfs off default cache/software checksum on default cache/software compression off inherited from cache cache/software atime off inherited from cache cache/software devices on default cache/software exec on default cache/software setuid on default cache/software readonly off default cache/software zoned off default cache/software snapdir hidden default cache/software aclmode discard default cache/software aclinherit restricted default cache/software createtxg 320027 - cache/software canmount on default cache/software xattr sa inherited from cache cache/software copies 1 default cache/software version 5 - cache/software utf8only on - cache/software normalization formD - cache/software casesensitivity sensitive - cache/software vscan off default cache/software nbmand off default cache/software sharesmb off default cache/software refquota none default cache/software refreservation none default cache/software guid 15239827051366107895 - cache/software primarycache all default cache/software secondarycache all default cache/software usedbysnapshots 0B - cache/software usedbydataset 96K - cache/software usedbychildren 0B - cache/software usedbyrefreservation 0B - cache/software logbias latency default cache/software objsetid 396 - cache/software dedup off default cache/software mlslabel none default cache/software sync standard default cache/software dnodesize auto inherited from cache cache/software refcompressratio 1.00x - cache/software written 96K - cache/software logicalused 42K - cache/software logicalreferenced 42K - cache/software volmode default default cache/software filesystem_limit none default cache/software snapshot_limit none default cache/software filesystem_count none default cache/software snapshot_count none default cache/software snapdev hidden default cache/software acltype posix inherited from cache cache/software context none default cache/software fscontext none default cache/software defcontext none default cache/software rootcontext none default cache/software relatime off default cache/software redundant_metadata all default cache/software overlay on default cache/software encryption off default cache/software keylocation none default cache/software keyformat none default cache/software pbkdf2iters 0 default cache/software special_small_blocks 0 default I have the following things run at midnight: 1. 23:50 PM my Synology server (under the same network with my UNRAID server) will power on 2. 23:55 PM my UNRAID server will use "user script" plug-in to make a direction under "/mnt/remotes/" and then mount my Synology server share folder to this location 3. 00:00 AM my UNRAID server will: check disk SMART information start cache mover start to use "Appdata backup" plug-in to backup my dockers and flash my Synology server will: start to backup shared folders via "Active backup for business" 4. 02:00 AM my Synology server will power down
  4. I also want to mention that this problem seems only occur when UNRAID server already runs for a period of time. When I just reboot, it seems I can upload and download as normal. But some time (last time it was a few hours after reboot, but this time it was almost 5 days) later this problem will happen and I will not be able to manage my files.
  5. @JorgeB Hi thanks for your reply! I really appreciate your help!!! Here is the out put: NAME USED AVAIL REFER MOUNTPOINT cache 5.21M 231G 96K /mnt/cache cache/a 96K 231G 96K /mnt/cache/a cache/else 96K 231G 96K /mnt/cache/else cache/kelsey 96K 231G 96K /mnt/cache/kelsey cache/photo 96K 231G 96K /mnt/cache/photo cache/software 96K 231G 96K /mnt/cache/software media 210G 650G 104K /mnt/media media/music 210G 650G 210G /mnt/media/music sys 305G 1.38T 144K /mnt/sys sys/appdata 37.9G 1.38T 37.9G /mnt/sys/appdata sys/docker 4.05M 1.38T 4.05M /mnt/sys/docker sys/domains 205G 1.38T 205G /mnt/sys/domains sys/isos 45.0G 1.38T 45.0G /mnt/sys/isos sys/system 17.0G 1.38T 17.0G /mnt/sys/system sys/work 61.7M 1.38T 61.7M /mnt/sys/work I tried to set "Array" as primary, and "none" as secondary, and then upload works fine! Do you think this may be a BUG or something because I am using 6.12.0-rc6?
  6. Problem: cannot save files to UNRAID server Hello everyone, mine UNRAID was working fine but today I got a serious problem where none of my files can be uploaded to the server anymore. I've been trying to use docker "File Browser", plug-in "Dynamix File Manager", as well as the WEBDAV & SMB sharing from windows, but none of them works. When I was trying see the syslog, it appears that the system was reporting: May 29 19:24:56 NorthernLight3s shfs: command failed: 1 Anyone has any idea? northernlight3s-diagnostics-20230529-1937.zip
  7. I was trying to have a 10min delay on auto mount remote drive to my unraid everytime the array start. The drive I intended to mount is actually a share from my VM. I need a few minutes after the boot to let the VM start. I had the following script but didn't work. Do you find any problem on my script? It didn't work. #!/bin/bash # Wait for 10 minutes before attempting to mount the shared drives sleep 600 # Define the shared drive information nl3s-vm-dsm="//192.168.4.172/nl3s_appdata backup" nl3b="//192.168.4.216/nl3s_appdata backup" # Mount the shared drives mount -t cifs -o username=marco,password=19980928MMCmmc "$nl3s-vm-dsm" /mnt/remotes mount -t cifs -o username=marco,password=19980928MMCmmc "$nl3b" /mnt/remotes # Verify if the drives are mounted successfully if mountpoint -q /mnt/remotes; then echo "Shared drives mounted successfully." else echo "Failed to mount one or more shared drives." fi northernlight3s-diagnostics-20230524-2340.zip
  8. I was trying to have a 10min delay on auto mount remote drive to my unraid everytime the array start. I had the following script but didn't work. northernlight3s-diagnostics-20230524-2340.zip
  9. I'd say 16gb is definitely not enough if you plan to run VMs. Start with at least 32gb.
  10. Oh and I am not sure if 13900K's igpu can be used to codec in plex or jellyfin right now
  11. These are very powerful hardware. The only problem I can think about is expandability. Your Z790 mobo comes with one PCIE_X16 slot and dual PCIE_X4 slots. You said you want to run 1-2 VMs on this machine, assuming you plan to add a graphic card on PCIE_X16, then you only left two PCIE_X4 slots for your future 10Gig card and SAS controller cards for sata expansion(you already used all 6 SATA ports on mobo). 10Gig cards on x4 is more expensive and most SAS controller cards are running on x8. An alternative would be mobo with on-board 10Gig ethernet ports, which will save you a pcie slot. Then use sata expansion card if you want to add HDDs in the future.
  12. There's a plug-in called file activity which monitors the file moving. I am not sure if it can help but worth a try.
  13. Agree Unraid is my favorite due to it's ease on add different volume disks but I was always wondering why it didn't have a smart cache system. In my synology nas there's a screen display the hit rate of my ssd cache and I really wish the same on my unraid server.
  14. I really appreciate your build! It's very handy! I see someone on github also mentioned about NVME ssds not showing up. I have the same issue here, where the NVME drives can't be recognized by your handy plug-in. And I have the output of "lsscsi -u -g" and "lsscsi": I am currently running UNRAID 6.12.0-RC2 with 2 identical Gloway Basic 256G NVME ssd cache, and force scan can successfully find my 2 nvme drives, but it just can't be find under "tray allocation" tab. BTW I want to mention that the 2 NVME was not able to be recognized by UNRAID at the same time before UNRAID 6.12.0-RC2 maybe because of the global duplicate IDs. I posted this problem on UNRAID forums and supports replied me to update to this UNRAID 6.12.0-RC2 version which solved the recognize difficulties in UNRAID. I am not a professional but do you think disk location may have the same global duplicate ID issue here? The thread I posted on UNRAID forum: https://forums.unraid.net/topic/137442-solvednew-nvme-not-visible-globally-duplicate-ids/#comment-1248613
  15. Thank you! It works! For those of you who struggle in the same issue, set MTU back to 1500 and reboot.
  16. maybe I need to reinstall UNRAID to solve this issue
  17. Maybe you can try those SLC USB disks, which last longer
  18. I suggest you take a look at Tailscale (free for personal users). It is very simple to install and can allow your remote access from iOS, Android, Windows etc. Upon my test the transmission speed can support my 720p streaming via 4G/5G cellular data on jellyfin. I bet Plex may be the same. Tailscale webpage: https://tailscale.com/ This is a post telling you how to install Tailscale on your windows PC and UNRAID server, you may need a webpage translation though. https://www.modb.pro/db/417853
  19. My unraid server was able to visit internet (docker provided DDNS service works fine, also App store can be visited) but a few minutes after booting unraid can't visit internet (my DDNS docker reports visit refused and App store can't be accessed). I can still use internal IP address 192.168.4.112 visit unraid but it just can't visit internet. Maybe this is because I just switched my router to Openwrt and some of my network configuration haven't be correctly changed? But wierdly my Synology server under same network can constantly using DDNS service as well as download from synology package center. Does anyone have similar trouble before? northernlight3s-diagnostics-20230413-0149.zip
  20. @itimpiI did read the release note but I didn't read comments below. I figured it out the problem is the "GPU statistics". Thank you very much for your help and sorry for wasting your time. best
  21. here is my diagnose northernlight3s-diagnostics-20230406-0212.zip
  22. Hi Jorge! Sorry for interrupt you once again. I just noticed that when I upgrade to 6.12.0-rc2 the dashboard page disappear. But the -tools-page map-dash stats works fine. Do you think this is because I am using a rc release? Or is there anything wrong with my UNRAID config? if I click into the "DashStats" everything seems pop out fine
  23. Problem solved. For those of you who also have this issue, remove the original cache pool, add a new one, manually set file system for your cache pool, then scroll down to the bottom and format the two new disks. Thank you so much JorgeB! You are the best!
  24. I tried to delete the original cache pool and add a new one. It did start the array but the GUI says they are unmountable