cthulhu161

I already tried it. The problem is with the disk. Same report with another cable and other disks are working perfectly with the cable. SMART gives me the same as the attribute function: /dev/: Unable to detect device type

Got a brand new WD Gold 24Tb. But I've got a problem to get it to work properly. I've got a WD Gold before and everything worked perfectly. I changed the disk and Unraid automatically detected it. Now Unraid won't detect it. Instead I find the new disk under Unassigned devices. The button next to it says: Format. All my disks are btrfs formatted. So I tried that... ERROR. Tried ZFS just to see if it works ... ERROR. Looking at the log gives me the same errors all over again: Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:38 T20 kernel: ata3: EH complete Feb 27 19:12:38 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:38 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:38 T20 kernel: ata3.00: failed command: READ DMA EXT Feb 27 19:12:38 T20 kernel: ata3.00: cmd 25/00:08:80:ff:ff/00:00:e9:0a:00/e0 tag 18 dma 4096 in Feb 27 19:12:38 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:38 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:38 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:38 T20 kernel: ata3: EH complete Feb 27 19:12:38 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:38 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:38 T20 kernel: ata3.00: failed command: READ DMA EXT Feb 27 19:12:38 T20 kernel: ata3.00: cmd 25/00:08:80:ff:ff/00:00:e9:0a:00/e0 tag 14 dma 4096 in Feb 27 19:12:38 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:38 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:38 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:38 T20 kernel: ata3: EH complete Feb 27 19:12:38 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:38 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:38 T20 kernel: ata3.00: failed command: READ DMA EXT Feb 27 19:12:38 T20 kernel: ata3.00: cmd 25/00:08:80:ff:ff/00:00:e9:0a:00/e0 tag 18 dma 4096 in Feb 27 19:12:38 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:38 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:38 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:38 T20 kernel: ata3: EH complete Feb 27 19:12:38 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:38 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:38 T20 kernel: ata3.00: failed command: READ DMA EXT Feb 27 19:12:38 T20 kernel: ata3.00: cmd 25/00:08:80:ff:ff/00:00:e9:0a:00/e0 tag 15 dma 4096 in Feb 27 19:12:38 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:38 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:38 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:38 T20 kernel: ata3: EH complete Feb 27 19:12:38 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:38 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:38 T20 kernel: ata3.00: failed command: READ DMA EXT Feb 27 19:12:38 T20 kernel: ata3.00: cmd 25/00:08:80:ff:ff/00:00:e9:0a:00/e0 tag 19 dma 4096 in Feb 27 19:12:38 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:38 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:38 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:38 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:38 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:38 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 unassigned.devices: Reloading disk '/dev/sdd' partition table. Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 28 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 18 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 28 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 1 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 30 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 7 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 25 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 22 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 26 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 23 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 28 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 31 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 27 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 24 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:39 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:39 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:39 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:39 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 21 dma 4096 in Feb 27 19:12:39 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:39 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:39 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:39 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:39 T20 kernel: ata3: EH complete Feb 27 19:12:40 T20 kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Feb 27 19:12:40 T20 kernel: ata3.00: irq_stat 0x40000001 Feb 27 19:12:40 T20 kernel: ata3.00: failed command: READ DMA Feb 27 19:12:40 T20 kernel: ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 24 dma 4096 in Feb 27 19:12:40 T20 kernel: ata3.00: status: { DRDY SENSE ERR } Feb 27 19:12:40 T20 kernel: ata3.00: error: { ABRT } Feb 27 19:12:40 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:40 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:40 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:40 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:40 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:40 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:40 T20 kernel: ata3.00: failed to enable AA (error_mask=0x1) Feb 27 19:12:40 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:40 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:40 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:40 T20 kernel: ata3.00: NCQ Send/Recv Log not supported Feb 27 19:12:40 T20 kernel: ata3.00: Read log 0x00 page 0x00 failed, Emask 0x1 Feb 27 19:12:40 T20 kernel: ata3.00: configured for UDMA/133 (device error ignored) Feb 27 19:12:40 T20 kernel: ata3: EH complete Feb 27 19:12:40 T20 kernel: sdd: unable to read partition table Feb 27 19:12:40 T20 unassigned.devices: Reload partition table result: /dev/sdd: re-reading partition table Feb 27 19:12:40 T20 unassigned.devices: Formatting disk '/dev/sdd' with 'btrfs' filesystem. Feb 27 19:12:40 T20 unassigned.devices: Format drive command: /sbin/mkfs.btrfs -f '/dev/sdd1' 2>&1 Feb 27 19:12:41 T20 unassigned.devices: Format disk '/dev/sdd' with 'btrfs' filesystem failed: ERROR: mount check: cannot open /dev/sdd1: No such file or directory ERROR: cannot check mount status of /dev/sdd1: No such file or directory btrfs-progs v6.3.3 See https://btrfs.readthedocs.io for more information. (above it's more of the same messages) If I check the attribute, I just get the message: Unable to detect device type I also tried to switch the disks. Same result. Other drives work well at the connection and the same problem with the drive on another connection. Has anyone an idea how to fix this? Or what the problem exactly is? Is there something I can install/update to surport the NCQ (whatever that is), get the configuration or to recognice the device type?

Hey, I have a weird problem with Jellyfin since I installed the latest update. Playing HEVC files directly without transcoding results in a glitch version. That is: The picture is pixelated, colors are wrong and sound and video are not synchronized. Playing the same files with transcoding works without any of these problems. I have another version of Jellyfin installed and haven't updated it yet. With this version playing HEVC files direclty works without problems. Has anyone any idea how to fix the problem?

Thanks for your support. Switching to jellyfin/jellyfin solved the problem. So 10.8 is finally working on my Unraid. Still don't understand why it doesn't work with your version. In my test version I switched back to your version of 10.8, but it still has the same bug (suddenly stopping after ~80% of the supposed playtime and sending me back to the main screen). I can exclude permissions and disc space as a problem.

Here people with different setups report similar problems after the upgrade: https://github.com/jellyfin/jellyfin/issues/6957 Playtime doesn't matter. It somehow happens primarily in the last part of the video (after ~75% remaining playtime after starting point) - independent of length. I tried it with videos 10 min long as well as 3h - always the same result. The last percentage missing means that I can skip back to the point where it stopped (when it is not in the percentage marked as finished). After restarting I can watch again, but it will stop after about the some percentage of planned playtime. Meaning the last second(s) can never be watched. I tried making a completely new docker container to test it. But it still happens with the update 10.8 and the older version works without problems.

Hey, I just received the warning 'Your server has run out of memory, and processes (potentially required) are being killed off.' The message is dated to tonight, about 1 hour after an automated parity check started. You find the diagnostics below. Should I worry and try something or reboot the system an don't worry if it is not happening again? t20-diagnostics-20220701-1140.zip

Tried a lot of things and nothing seemed to work. Reinstalling, changing settings, etc. - always the same problem. Changed the repository to amd64_stable_10.7.7 and this finally solved the problem. The 10.8 Upgrade doesn't seem to work on my Unraid at the moment

Searching for similar errors I found that people who have multiple jellyfin/emby/plex/etc-dockers experience similar problems. I only got one docker of this kind. But many months ago I had another problem with jellyfin that could be resolved by reinstalling it. The new jellyfin couldn't find my old appdata because it created a new folder 'Jellyfin-AMD-Intel-Nvidia' and my old appdata was in a folder simply called 'Jellyfin'. This problem could be resolved by changing the Data Path in the Unraid Settings. Since then I have two folders 'Jellyfin' and 'Jellyfin-AMD-Intel-Nvidia'. Is it possible that this causes my problems?

I don't think so. I have more than enough free storage place on all drives. The appdata share has 210GB free space. The only possible storage problem could be if I limited the cache - but I don't remember doing so or where such a setting would be Looking into the logs I found a few possible errors: The first message that could be relevant and appears is 'Current HLS implementation doesn't support non-keyframe breaks but one is requested, ignoring that request' Then multiple messages appear: 'Slow HTTP Response from X to Y in Z with Status Code 200' (X is a URL for Jellyfin, Y an IP, and Z is always a different number - maybe a timer?) Then the first real error [ERR] appears: 'Jellyfin.Server.Middleware.ExceptionMiddleware: Error processing request: "Could not find a part of the path '/null'". URL "GET" "/Environment/DirectoryContents".' Then another warning: 'Emby.Server.Implementations.HttpServer.WebSocketConnection: WS "192.168.0.178" error receiving data: "The remote party closed the WebSocket connection without completing the close handshake."' Then: 'Jellyfin.Server.Middleware.ResponseTimeMiddleware: Slow HTTP Response from "http://192.168.0.206:8096/Sessions/Playing/Stopped" to "192.168.0.160" in 0:00:01.7688115 with Status Code 204' and after that the previous warning about the failed handshake again. Resulting in: "Emby.Server.Implementations.HttpServer.WebSocketManager: WS "192.168.0.178" closed" Then the log states 'Emby.Server.Implementations.HttpServer.WebSocketManager: WS "192.168.0.178" request' and many of the previous warnings and errors reappear. This process results in 'Jellyfin.Api.Helpers.TranscodingJobHelper: Stopping ffmpeg process with q command for "/config/transcodes/676f3ed03c0245c7a27e0ef55a7281fd.m3u8"' and 'ellyfin.Api.Helpers.TranscodingJobHelper: FFmpeg exited with code 0' Sometimes it also states: 'Emby.Server.Implementations.Session.SessionWebSocketListener: Sending ForceKeepAlive message to 1 inactive WebSockets.' and then 'Emby.Server.Implementations.Session.SessionWebSocketListener: Lost 1 WebSockets.' directly followed by the ffmpeg code 0 message

Yesterday I updated Unraid OS and Jellyfin and suddenly I have a strange playback issue. Everytime I watch a video it works for at least half the length without any problems. Then it suddenly stops and I’m back at the home screen. The progress is saved so (if the problem doesn’t appear in the last minutes) I can jump back to the point where I was kicked out. The problem appears independent of the length of videos, the player (browser, jellyfin desktop) and the device I’m using. I tried to increase encoding speed, but it doesn’t solve anything. Has anybody any idea what could be the cause of this problem?