unCoreX

Well have been testing and no more error and the SMB is working normally. Thanks for the fix.

Hi, So far so good. No more errors. I will report back later after some more testing

I haven no idea if this is related or not. I was just googling "CIFS: VFS: directory entry name would overflow frame end of buf" https://lore.kernel.org/all/[email protected]/

I'm sure you going to figure it out, thanks

Yeah that's right, nice to see you also could reproduce this

No, is where all my media are stored. I have to NAS, one for Backup and the most important the Multimedia(all my movies etc are there) As you can see in the image, i have mounted Multimedia to the unraid server. I have everything running here, Plex server, lot of arr's all of the are pointing to this mount: /mnt/remotes/Multimedia/

I have added my diagnostics on my first post

Hi, I had downgraded back to 6.12.8 and the "bug" is gone. I also notice that i had some problems with new episodes that's has been added to Sonarr. Some of the episodes wouldn't be added even when the episode was in the right season folder. I deleted the episode, redownload it. It was added to the right season, Sonarr found it and everything seems to be ok,. But after I did "Refresh & Scan" the episode was gone from sonarr, but i was still on my NAS. Rolled back to 6.12.8 everything back to normal and no more problems with episodes in Sonarr. All my Media files are located on my NAS, so all the arr and plex server are pointing to my NAS. So I stay for now on version 6.12.8. Maybe some other are experience the same when they have the same setup like I have.

Quick rapport after installing 6.12.7 RC2 and the latest version 6.12.8. My problem is gone. Thank you so much

Hi, Just to be clear, Yes I have to servers. My primary one was the first server i noticed the slowness. When I upgraded it to v.6.12.4. Then I downgraded to v.6.12.3. Back to normal. Then I tested my backup server, That one was also in version 6.12.3 upgraded to 6.12.4 then the problem starts, slow pages. I just kept upgrading the backup server all the way to this release 6.12.6 and still the same. But, booth computers are using the same USB pen-drive Kingston DataTravler 3.0 - 8GB This is from my primary server running v.6.12.3 (same USB Pen-Drive as the one in my backup server) Runnig command: time echo 1 > /boot/test.xml On my primary server (6.12.3) My backup server on version 6.12.6 (now without Bonienl's fix) Slow pages again. And backup server with Bonienl's fix: Fast page load. Fast as in v.6.12.3 But the write speed is the same

Hi @bonienl Good news, It's working. All the pages are fast like normal. Would be nice to see other with similar problem, test your files also. Desktop 13-12-2023 17-56-03.zip

@bonienl I just copied your files, and now the dashboard is fast But the APPS page are just white. And DOCKER page is missing something. Same if you go to Settings ---> DOCKER, nothing happening, just white page. And the DOCKER page: But the Dashboard is fast

I did run your command: echo 1 > /mnt/user/appdata/test.txt It responded imminently, no delay The command: echo 1 > /boot/test.xml Gave me a delay around 5 - 6 seconds. But the best part, I did run this command ( echo 1 > /boot/test.xml ) on my primary unraid server, still on version 6.12.3. And have the same delay as on my backup server with version 6.12.6. Interesting since my version 6.12.3 are working perfectly fine on booth computers. I uploaded to short recording of the delay on booth servers. Pegasus 6.12.3.zip Backup_Server_6.12.6.zip

Hi, 1. 1. Access the system using its IP address. e.g. http://192.168.1.100 (replace by your server address) I always use ip to login into my unraid: http://10.10.60.105/ 2. Under network settings change to a static DNS server assigment, e.g. use 1.1.1.1 or 8.8.8.8 3. Under display settings change "Show Dashboard apps --> None" Nothing change, still the same. 4. Do a file system check (using Windows) on your USB device to check for any errors to repair Did a check on my USB driver, no error found. This is also 2nd time I did an clean install, formatted the USB drive also.

Hi, Here is the new log file included and diagnostics if needed. Thanks for looking at this issue. php.slow.zip

Hi, - I just did an clean install of the latest version 6.12.6. Just downloaded the zip file and extracted to my USB pen and copy my license key. - Booted up my backup server - Made a new root password. - Signed in for the first time - First time it goes ti the MAIN page. I didn't assiged any disk this time. No Arrray or Cache. Now the speed is much more normal, around 1 - 2 seconds when I go back to Dashboard page from any other page. - Next thing I did was changing the timezone, after that the problem start again. Slow Dashboard, almost 20 seconds. I change back do default settings in the "Time and Date" but still same, slow Dashboard. Rebooted the server. - But that didn't help. So the problem is back. Slow, Did another reboot. - Same again after a reboot. - I turn off use NTP and rebooted again. Same problem. I don't believe NTP has something to do with this slow pages. So what has changed since 6.12.3 to 6.12.4 when my problem start? My primary server are stuck on version 6.12.3

Hi, give me a day or two. Then I'm going to do an clean install + just add my license key. I did this on an early post here, I think it was on version 6.12.4. Then same problem.

Tested the latest release 6.12.6. Still the same. Any devs looking at this issue? I'm not the only one here with the same issue I see.

Hi, Still the same with Array stopped. I added a small video. (with v.6.12.3 the Dashboard popup after 2 seconds) Desktop 28-11-2023 22-43-34.zip

Hi, Same problem in latest version 6.12.5 released today. Tested on my backup server. galactica-diagnostics-20231128-2145.zip

EDIT: In the syslog I see this message, never seen it before on version 6.12.3. This message appear only when I go to the Dashboard tab, the one that's take almost 20 seconds to open. My backup server: I also like to add a short recording of how slow unraid is when I go to APPS tab. Desktop 26-11-2023 21-36-02.zip

Hi, I did reversed the settings as you mentioned, still the same. I have two very different systems, and the same problems on both with v.6.12.4 and 6.12.5 RC1 Primary Server: unRaid Plus: ASUS PRIME B560M-K | 64GB DDR4 | Intel Core i9-10900 | ASUS GeForce GTX 1650 DUAL MINI Backup Server: unRaid Basic: HP ProLiant ML350p G8 | 128GB DDR3 ECC | 2 x Intel Xeon E5-2697v2

Hi, 1. Done that couple of times 2. Tested with: Microsoft Edge, Firefox, Google Chrome, LibreWolf and Brave. 3. Tested from 3 different computers also.

Hi, My backup unraid server is a clean install with everything default. And i'm using pfsense firewall. And I also have played around with: Settings > Network Settings > eth0 > Enable Bridging = NO/YES Docker settings, nSettings > Docker > Host access to custom networks = Enabled/Disable On my primary server running v.6.12.3 never had MACVLAN crashes. Tested to upgrade to 6.12.4. Then this problem start. That's why I'm testing my backup server instead, and have the same problem. Two very different hardware here. From my Primary unRaid Server: (6.12.3)