BeardedMate

Thank you. It was just that easy eh? Didn't want to proceed and mess anything up. Much appreciated.

I reran it without -n, I will attach the output. It states at the end "Please reset with mount -o sunit=,swidth= if necessary". Where would I do this? xfs_repair.txt

Sorry I should have included that. The filesystem is xfs. Checking the Fileystem Status, I get this output "Phase 1 - find and verify superblock... would write modified primary superblock Primary superblock would have been modified. Cannot proceed further in no_modify mode. Exiting now.". It seems as if xfs_repair is not available, as it stated before the check.

Shutdown my server because I had to do some rearranging in my room and after turning it back on, suddenly my Disk 4 is unmountable. The status indicates "Unmountable: Wrong or no file system". When I view Disk 4 in maintenance mode, it states "xfs_repair status: Not available". I'm not sure what to do from here as I do not want to lose my data. If anyone has any advice, please let me know! Diagnostics attached. node-diagnostics-20230416-2233.zip

I guess I will need to contact WD. This is a brand new drive that I just got yesterday. Very unfortunate.

Swapped cables, here is the new diagnostics. node-diagnostics-20230228-1423.zip

Here you go! Also, it is SATA3_2 that isn't showing up in unraid. node-diagnostics-20230228-1405.zip 230228190051.BMP

I got a new SATA harddrive and have put it in my system. It will not show up in unraid by any means but shows in the BIOS. I have tried different cables, cables from the other drives, unplugged other drives, etc. It does not appear under unassigned devices. I am very lost at this point because every drive I've put in this system has always shown up and was a smooth process. Any tips or diagnosing would be helpful, thanks.

I created a new USB and was able to identify which drive was my parity drive. Setting that as parity and my 3 other drives in the first 3 slots, I can start the array and it states "Start will start Parity-Sync and/or Data-Rebuild.". Is it okay to start the array at this point in time? All of my data are still on the 3 mountable drives, I'm just worried that they will get overwritten.

I installed a new HDD today and when booting, the drive wasn't showing up in unassigned devices. I booted into BIOS to make sure the drive was being detected in my system and it was. Upon rebooting, I got an error that stated "failed to load ldlinux.c32". Ended up finding out my USB has died and that there isn't a backup available on "My Servers". I unfortunately do not have a backup anywhere else. What is the best solution here? I have grabbed a new USB and am attempting to put the same OS version I had before on it. Right now I have 4 HDDs (2 8TB and 2 6TB) and 1 SSD for cache. One 8TB was parity, the other was storage, and the two 6TBs were also storage. I'm not sure which drive by serial number was the parity drive. I've looked everywhere for a screenshot I may have taken of the main page but I can't find anything. I really do not want to lose my data. Any help would be appreciated.

Every morning when I go to check on my minecraft server, the console shows this message: "There is no screen to be attached matching minecraft.". This results in me having to manually restart the server every morning. Has anyone else run into this issue? Info: I'm running 1.18.2 because of the netty issue with 1.19.