ohare93

Sorry for the delayed response. Kids, aye? Looking more into my issues I found that my logs are filled with kernel errors I see here someone suggested blacklisting the radeon driver. Would that simply make it use the amdgpu driver, or just make it stop working? 🤔I am woefully unknowledgeable about this stuff. But in answer to your original question, I have been trying to run this container with gpu support https://github.com/ahmetoner/whisper-asr-webservice/ I am using the right image ":latest-gpu" and have tried passing through the driver in various ways in the extra parameters: `--gpus all` gives an error whereas `--device /dev/dri` and `--gpus device=0` "work" but do nothing. Though I imagine that may be due to my kernel issues 🙈 Lastly, I am getting slightly more of a response from radeontop 🤔 It probably means nothing, but I just thought it was weird that the graphics pipe went up to 100% and I had some more RAM usage 😅

People refer to the "Radeon-Top Plugin" to get an AMD GPU working on Unraid. I can get some output from `radeontop`: radeontop v1.4-4-gec97e6f, running on HAWAII bus 01, 120 samples/sec │ Graphics pipe 0.00% │ ─────────────────────────────────────────────────────────────┼────────────────────────────────────────────────────────── Event Engine 0.00% │ │ Vertex Grouper + Tesselator 0.00% │ │ Texture Addresser 0.00% │ │ Shader Export 0.00% │ Sequencer Instruction Cache 0.00% │ Shader Interpolator 0.00% │ │ Scan Converter 0.00% │ Primitive Assembly 0.00% │ │ Depth Block 0.00% │ Color Block 0.00% │ UVD 0.00% │ VCE 0.00% │ │ 15M / 8192M VRAM 0.18% │ 5M / 2043M GTT 0.23% │ 0.15G / 0.00G Memory Clock inf% │ 0.30G / 1.04G Shader Clock 28.85% │------------ │ But I can never get anything to actually utilise it. I have tried many attempts at passing it through to a docker container, with no luck. What steps can I take to get this working? Thanks for any help~

Aha! I found my issue! I was clued in when I tried to pull a Docker image and got an error along the lines of "Certificate not yet valid". My date/time was wrong! It got reset to January 1st when I replaced my motherboard. I simply booted up the BIOS, fixed the date, and started it up again. All fixed!

Very strange issue: Unraid thinks it has no internet. Neither Unraid Connect nor the Community Application plugin can access the internet. Yet I can access via other apps (in Docker) and ping Google in the terminal. This occured after I did I revamp of my server hardware: new motherboard, cpu, and RAM. My only thinking here is that my new motherboard has both Ethernet and Wifi built in 🤔 Dunno what to do. Any help appreciated. thebox-diagnostics-20230617-1608.zip

Will that consume my 1 yearly key change?

I have been using the Trial run for the last month, and have decided to purchase a key. Before doing so I changed over my Unraid install from my crappy old usb that I was using to test, over to a good quality one that I just purchased. So I followed the steps here https://wiki.unraid.net/Manual/Changing_The_Flash_Device by swapping over the data via the Flash Creator, booted up the new stick (removed the old one), and purchased a license. All was well for 10 mins, I booted up the Array, but then 10 mins later I started getting an error saying my license key did not match the usb I have plugged in. Can this error be fixed on your end? Happy to provide both usb guids, or any other info, if needed. Though I presume you can see the data on my account. Thanks for any help 🙏

About the vikunja-api container. I have followed the advice others have given here, and successfully have it finding the config file. But when it run I get an annoying error: 2022/08/12 23:22:14 Using config file: /etc/vikunja/config.yml usermod: no changes 2022-08-12T23:15:16.690509176+02:00: CRITICAL ▶ migration/Migrate 002 Migration failed: dial tcp 192.168.0.105:3306: connect: connection refused This is a known bug in the documentation, but the steps to fix it are "the db wasn't ready yet, just run it again". But this does nothing. I thought the db was included as part of the api container. Do I need my own one? Edit: I had a mismatch in the docker config for the db type vs the config file the application needs to run. Changing them both to "sqlite" fixed it. Also the db host to "db", but I don't know if that made a difference or not. It's running now, either way!