Gragorg

Follow this video from Spaceinvader one.

Your Jellyfin client won't have a Wireguard client in most cases if your running it on a Tv or settop box. I recommend NginxProxyManager with Cloudflare to do this. NPM will forward external traffic to Jellyfin docker. When the site such as jf.yourdomain.com it will ask for Jellyfin login credentials. Worth noting that Plex offers SSL encryption built in so you wouldn't have to setup anything for external access.

Keep appdata and domains on the Cache. it is so much faster and lower power consumption. My Mx500 I use for my cache shows Power on hours as 6y 3m 14d. I wouldn't really worry about SSD wear and tear. If your worried about it you can mirror 2 in a cache pool. Shares such as media and what not are stored on the array.

Did you power down your server and put your usb in a PC and try to copy it that way?

SSH in and post your diagnostics

So you have 2 parity drives and 1 data drive? I'm not sure what the second parity would do since the only data drive is covered by parity 1.

Under the Scan Automatically tick on plex it says "Your library will be updated automatically when changes to library folders are detected." Mine does not stay spun up. If your have the plex appdata on the array it will keep the disk(s) it is located on spun up.

Your going to have to contact support or maybe @SpencerJ can help you out.

It acutally pretty easy to do. Here is a great video by Spaceinvader One which covers what your trying to do.

Did your disks spindown in FreeNAS? Im guessing the extra time is account for disks to spin up in unraid.

When you setup Deuluge vpn you had to download ovpn files from your provider. Each file is listed for a different country. Take a look on youtube at Spaceinvader ones old DelugeVpn video. It will give you a good idea about endpoints.

Did you try different endpoint for each?

Start by posting your diagnostics for the pros.

So is it normal to have 2 mac address showing on the same IP in my new router?

Something else I noticed under Docker settings. On test server it shows "Docker custom network type: ipvlan". That docker setting is totally missing on my server?

Not entirely sure when i run ifconfig -a I get the following entry for it vhost0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether :::MY MAC ADDRESS: txqueuelen 500 (Ethernet) RX packets 48562 bytes 8494721 (8.1 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 50 bytes 2100 (2.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 I thought it was weird as it never showed up in my old router. I assume this comes from docker networks? Everything seems to work as it should. Does this require any further attention?

So I just replaced my router and it now shows my servers ip in attached devices twice. The one mac address matched my network settings. It shows 5 wired devices two being the same ip as the server. I only have 4 ports plugged in so not sure what would cause this? I did restart the server and the same issue . tower-diagnostics-20231116-1727.zip

I am currently using cloudflare dynamic dns and NPM. I would like to switch to tunnels and close ports for NPM. My question is I am currently hosting a minecraft server on this setup. Is there any issue with running a minecraft server through the tunnel? Would I just have to point my MX and SRV record to the tunnels instead of the dynamic dns?

I setup fail to ban and it seems to be banning ips. I checked with my iphone on lte. I am however getting some errors in the log. 2023-11-09 16:23:02,147 fail2ban.utils [1]: ERROR 148091209830 -- stderr: 'iptables: No chain/target/match by that name.' 2023-11-09 16:23:02,147 fail2ban.utils [1]: ERROR 148091209830 -- returned 1 2023-11-09 16:23:02,148 fail2ban.actions [1]: ERROR Failed to execute ban jail 'bitwarden' action 'iptables-allports' info 'ActionInfo({'ip': '209.171.85.61', 'family': 'inet4', 'fid': <function Actions.ActionInfo.<lambda> at 0x1480911b9120>, 'raw-ticket': <function Actions.ActionInfo.<lambda> at 0x1480911b98a0>})': Error starting action Jail('bitwarden')/iptables-allports: 'Script error' Is this anything to be concerened with? Also in my jail.local file bantime and findtime are in seconds. What the standard settings that most use? Also how can I unban someone if they get accidently banned? I am currently set to 300 seconds for testing. Also is it possible to put my ip at home on an ignore list?

I used to run Photoprism. I just looked in my previous installed apps and it is listed as Depreciated. It looks like its been removed when I search for it in the app store. Maybe @ich777 can weigh in?

Is everybody else affected by the Cloudflare outage?

Thanks for this. Just ran into this issue and this solved it!

In the past Apple TVs have could not natively play MKV files. All MKV files were transcoded to MP4 file. My apple tv was a couple generations old thou. Also if your tv and apple tv share the same hardwired port you could also possibly have a cabling issue. Try plugging in another device at your TV drop.

If your looking for inexpensive option this x4 6 port asm1166 card has worked perfect for me.

Can anyone recommend a PCIE card to add at least 2 NVME ports? I would like to mirror my cache drive. I assume if the card is X4 it shouldn't really bottleneck the drives?