JudasD

will this also show any networks that were created via cli?

Dynamix Share Floor plugin hasnt worked in at least a year. It should be listed as deprecated in the CA store.

@Lazaros Chalkidis The unassigned drive is now working, thank you! I also really appreciate the font size changer. This plug-in is very, very nice!

Hi @Lazaros Chalkidis, below is my output. i dont not have the folder: /var/local/emhttp/plugins/unassigned.devices and my unassigned.devices.ini is located at /var/state/unassigned.devices/ { "source": "ini", "path": "/var/local/emhttp/plugins/unassigned.devices/unassigned.devices.ini", "exists": false, "size": null, "sections": 0, "timestamp": "2026-06-06T12:01:26-07:00" }---- cat: /var/state/unassigned.devices/unassigned.devices.json: No such file or directory

Hi @Lazaros Chalkidis, I tried the new version and i am still not seeing my unassigned drive.

@Lazaros Chalkidis Does the plugin support the unassigned drives that have been set as pass through? I only have 1 unassigned drive and it isn't showing the the plugin. Not sure how else to help troubleshoot this one.

Hi @Lazaros Chalkidis, would it be possible to use the same polling method for the drive free space as you would for the temperature? This would allow for specific drive settings to be used for each device. I am also seeing the Header Bar Indication Click-action always takes me to the 'main' page, no matter what i have set here. I do have the Unassigned Device Plugin installed and the drives show on my dashboard widget normally, but the Disk Viewer widget doesn't show them.

HI @Lazaros Chalkidis, i had to flush cache on browser and now it is working. 👍 I have my HDD warning temp set to 45, and my NVME warning temp set to 60. I am the NVME drives showing red on the widget when it passes the 45 degree mark of the HDD. The widget is acting as though it uses the HDD temperature threshold for all drives. Hopefully my explanation makes sense.

Hi @Lazaros Chalkidis , I have tested the new version and here are my findings: Space Severity Highlighting works on my server. Thank you for this addition. Temperature Unit Awareness does not appear to be working. I have selected Celsius and Fahrenheit in my setting, and both still display in celsius in the widget.

Very nice plug-in. I really enjoy the layout. I see no issues with the plug-in, but i do have two quick pieces of feedback for your consideration. Method to disable the space alert for any drive in the array. I am using the Fill-Up method, so many of my drives are at 100%, which creates a false positive alert. Ability to toggle Celsius/Fahrenheit for drive temperature Thank you for all your efforts!

very promising app, clean and fast! Thank you for all your efforts. I submitted an enhancement request to also scan stopped dockers.

SOLVED: Was a permissions issue. i fixed the issue and i am posting here incase anyone has this issue in the future. the permissions on /mnt/disk1 (not recursive) had been changed to 0333 -wx-wx-wx. I still do not know how this permission change occurred. Once i set /mnt/disk1 to 0777 to match the others, everything went back to normal. Symptoms: 0333 caused all shares to disappear from the UI page. Array shares where not showing AND did not operate. pool shares were also NOT showing, but did operate. via SMB: /mnt/user, /mnt/user0 and /mnt/disk1 all showed empty. all other paths would show correct folder items. I can now go about my day and put down the ant-acids. :) Thanks, JD

this issue just happened to me on 7.1.4. i am not using nfs (is disabled), and im only using smb. My shares show blank, but i can still access /mnt/cache and /mnt/Disk2 via smb rootshare. /mnt/user, /mnt/disk1, etc show as blank via the share. reboot does not help. I also do NOT see "shfs: shfs: ../lib/fuse.c:1451: unlink_node: Assertion `node->nlookup > 1' failed." in my logs as others have reported. Any ideas? Thanks, JD

how does this differ over the IPMI plug-in?

unfortunately i could not immediately uninstall the plugins after they switched to 'pending'. I needed to toggle safe mode and then i could do the uninstall. very odd behavior, but at least i didn't have to reboot.

I can see your entries in the CA listings, but they are showing "Pending". I took this as pending install and came here to find out what pending means. I can see you are awaiting a +1 or +2. Thank you for all your efforts.

yes, this is still present even on 7.0. The way i have solved the issue is using a different browser just for unraid and use Brave for everything else. unfortunately sometimes silly issues require silly solutions.

thank you for trying to reproduce. it happens only upon reboot and it is not every reboot. I do not reboot very often, so this is why i have not been able to gather any substantial data. I'll follow-up if i do determine any patterns. Thanks, JD

has anyone experienced the ctop plugin disappearing upon reboot? i had it happen on 6.12.15 and 7.0.

Hi alturismo, For the sub files: My intent is to also include .srr and .idx to the file mask. wouldn't this also copy the sub files as well since the file name would match and only the extension changes? For TVs shows, i would expect each episode to copy when they are accessed, not ahead of time. Copying what isnt accessed, like a pre-cache, is would i would like to avoid. Once they are copied, then they remain in cache for the next user to use. Maybe that is how the feature can be labeled: pre-cache; this would copy everything in the folder like it does now, but disabled would only copy the filename with the correct matching extensions entered (i.e., the video and sub file). My use cases could be breaking the intent of the script. Please disregard my queries if i am going against the progression of the plug-in. Thanks, JD

@alturismo Would you be able to add an option to copy the entire folder vs. only a single file? I have a folder with hundreds of ambiance .mp4 files and i cannot use this plug-in due to each file not being in its own folder. A single file copy matching only what is being watched would be very handy. Thank you for this very nice plug-in. Thanks, JD

bump. checking to see if anyone is having any luck with the share floor plugin? Plugin just says no share or pools updated. ANyone still using this?

You were correct and with your guidance i am now working again. Thank you!

luckybackup now passes the -noserverkeymap error, but now stalls at startup: WebSocket server settings: - Listen on :8080 - Web server. Web root: /usr/share/novnc - No SSL/TLS support (no cert file) - Backgrounding (daemon) ---Ensuring UID: 99 matches user--- ---Ensuring GID: 100 matches user--- ---Setting umask to 0000--- ---Checking for optional scripts--- ---No optional script found, continuing--- ---Checking configuration for noVNC--- Nothing to do, noVNC resizing set to default Nothing to do, noVNC qaulity set to default Nothing to do, noVNC compression set to default ---Starting cron--- ---Taking ownership of data...--- ---Starting...--- ---Preparing Server--- ---ssh_host_rsa_key keys found!--- ---ssh_host_ecdsa_key found!--- ---ssh_host_ed25519_key found!--- ---Starting ssh daemon--- ---Resolution check--- ---Checking for old logfiles--- ---Starting TurboVNC server--- ---Starting Fluxbox--- ---Starting noVNC server--- ---Starting ssh daemon--- ---Starting luckyBackup--- Sits here indefinitely, vnc fails and does not bring up the app UI. Thansk, JD

I also experienced the large logo on a fresh install. This cmd line fixed the issue straight away. Thank you!