fespinoza831

Hello today I had a disabled drive. I attempted to remove and re add but rebuild would fail. it started getting errors on multiple drives. so I should shown check all cables and even replaced a few but continue to get error with two drives. Ended up trying a new config removing the two drives but now I still get errors on another drive and when I try to repair i get the following Phase 1 - find and verify superblock... superblock read failed, offset 0, size 524288, ag 0, rval -1 fatal error -- Input/output error plexserver-diagnostics-20240806-1806.zip

The same drive has been disabled 3 times in a week. Always the same drive but it passes smart checks with no errors. Disk 7 plexserver-diagnostics-20240602-2106.zip

Thanks, verified all connections and was able to rebuild the drive. I have previously purchase server different cables for my hard drives. but have seen issues with all. are there any reliable cables that can be recommended.

Hello had a drive get disabled and after try to rebuild data it pauses and starts a read check. the read check completed. started the rebuild again but its did the same thing. plexserver-diagnostics-20240428-2026.zip

So I disabled the syslog and it hasnt shutdown anymore..

its the same diag log or is it another log

sorry I hadn't replied sooner but noticed that syslog was still enabled when I pulled that previous log. or is there a different log that you need.

I suspect my server is loosing power, just not sure how to confirm. I wake up to the server up an running fine but it will be doing a parity check. its happened a few times this week. I do have it plugged into a UPS and has a gold nzxt 750 PSU. but any suggestions on how to confirm or test my PSU. on a side note I notice a separate issue at the same time. Nvidia GPU wont be recognized but it will say that there's a new driver for me to install and that a reboot is needed and GPU wont work until I restart again. I have since change to CPU transcoding for the meantime. plexserver-diagnostics-20240314-0728.zip

It will be fine then i get notified that there's a new driver update and the gpu will disappear. but no hardware changes or anything

Hello I keep getting this error every few days. "NVIDIA-SMI has failed because it couldnt communicate with the NVIDIA driver". After rebooting it says Unable to determine the device handle for GPU0000:01:00.0: Unknown Error plexserver-diagnostics-20240310-0610.zip

Thank everyone I have delete the additional .cfg files

updated to 6.12.6 and mover is now running. Thank you. I would like to clean up the shares like you said but not sure if I'm understanding the issue here which share is not on storage media?

I enabled the mover logging, uninstalled the mover tuning plugin, checked to make sure cache pool options are correct, manually triggered the move and nothing, plexserver-diagnostics-20240116-2026.zip

Had so many other issues not sure when this started but files are no longer being moved even is I trigger it manually. plexserver-diagnostics-20240115-2022.zip

Sorry been really busy at work and hadn't had time to come back but the issue is resolved since I added the recommends PCIE nic card.

Thank you

Should be able to fix adding a pcie nic card right? will a regular tp link one work or is there a specific one I would need?

I noticed that it was set to auto for DHCP I set it to static and it came online immediately but it went down over night again. what would cause this?

Happed again syslog (1)

Here you go. noticed this in the syslog bond0: (slave eth0) error -19 calling_set_mac_address syslog plexserver-syslog-20240103-0229 (1).zip

I dont see that file there. anything I need to do to generate it besides enabling?

Looks like I already have this enabled and its set to save in the appdata folder but not sure what im looking for.

also happed while I was in safe mode server seems to still be up since I can access it via its native UI but not via web UI

All of a sudden i couldnt access the web UI, i rebooted got to the logging screen on the UI and login maybe 10 seconds later it was unresponsive again. Attached is the log but not sure if it will help since I had to reboot. im currently in safe mode but not sure how to proceed. plexserver-diagnostics-20240101-1754.zip

i woke up to a disabled drive again. plexserver-diagnostics-20231114-0531.zip