nacat78

I dont think the webserver and virtualbox are suppose to use the same port... keep webserver with 8090 and virtualbox with 18083. then to access phpvirtualbox goto server ip:8090 checkout the pics that i posted on page 22 http://lime-technology.com/forum/index.php?topic=25715.msg277669#msg277669 and make sure that you have 127.0.01 in both the virtualbox page and config.php file... this part kicked my butt and was racking my head to get it going...

Thanks Fireball3, I will try it out again over the weekend and report back with findings....

what do you have configured in your phpvirtualbox Config.php file? should be: var $location = 'http://127.0.0.1:18083 or var $location = 'http://127.0.0.1:XXXX - XXXX being what port you have configured in the VirtualBox Plugin.

I have a supermirco PDSM4+ motherboard w/ARC-1680ix-8 SAS card that i am trying to get temps to show for the MB, CPU and Hard drives and having issues building the sensors.conf file. Any help or advice would be great.

@ Fireball3 I have a couple of H310s that i am attempting to flash to Dell IT/HBA mode or LSI P16/P17 - was able to dump or erase bios/firmware and extract SAS address, but when i go to flash i get: DELL IT (Step 5.1) Advanced Mode Set Adapter Selected is a LSI SAS: SAS2008(B2) Executing Operation: Flash Firmware Image Firmware Image has a Valid Checksum. Firmware Version 07.15.08.00 Firmware Image compatible with Controller. Valid NVDATA Image found. NVDATA Version 07.00.00.00 ERROR: Failed to Upload Image! Firmware Image Validation Failed! Firmware Returned Exception. IOCStatus=0x4, IOCLogInfo=0x0 Due to error remaining commands will not be executed. Unable to Process Commands. Exiting SAS2Flash. or LSI P16/P17 (Step 5.3) Advanced Mode Set Adapter Selected is a LSI SAS: SAS2008(B2) Executing Operation: Flash Firmware Image Firmware Image has a Valid Checksum. Firmware Version 17.00.01.00 Firmware Image compatible with Controller. Valid NVDATA Image found. NVDATA Version 11.00.00.00 Checking for a compatible NVData image... NVDATA Device ID and Chip Revision match verified. Valid Initialization Image verified. Valid BootLoader Image verified. Chip is in RESET state. Attempting Host Boot... Firmware Host Boot Successful. Writing Current Mfg Page 2 Settings to NVRAM. Failed to Validate Mfg Page 2! Firmware Returned Exception. IOCStatus=0x25, IOCLogInfo=0x0 Due to error remaining commands will not be executed. Unable to Process Commands. Exiting SAS2Flash. Did some searching a found a couple of other guides, but none of them got me any closer to restoring card functionality, any advice or guidance would be greatly appreciated.

jumperalex, It took me a while to get it all sorted out to work on my end also - I initially went thru the pain of piecing information from several posts and threads to get to the end result - also just got it to work so that i could do the same and play around with the virtual environment from within unraid. but no matter what there's a plethora of experienced and novice users to help each other out and what ever you need to get it to work, just recommend you keep posting your status updates and roadblocks so that everyone can assist. Also wanted to clarify do you have lighttpd from unmenu and SF web server installed?

Just want to confirm that the phpvirtualbox files are in the root directory of the web server or that the web server is pointing at the phpvirtualbox files.

@ DTox - from phpvirtualbox select file then preferences and change the location/storage of VM files - cannot be root.

VirtualBox has always done that for me since i've been tinkering around with it. all i do is leave the page and go back in and everything it started and fine.

Here's the one that I recompiled for 5.0.4 and seems to be working https://www.mediafire.com/?8lbu3v1cjww3ag3

Same issue here... anyone else having similar isssues?

+1 , using 8GB and it occasionally does the same. I have AirVideo, Control Panel, Plex, Transmission, CouchPotato, SickBeard, and Folder Cache all running.. But i stop services that i dont use all the time while server sits idle.... usually dont have many issues, but when they do its great to have unmenu, screen, or putty to try to restart services or do a clean shutdown and reboot...