Thamer Alfuraiji

Members
  • Posts

    34
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Thamer Alfuraiji's Achievements

Noob

Noob (1/14)

9

Reputation

1

Community Answers

  1. Updated : I've fixed it .. by following this solution in this thread it seems that I lost the partitions and this retrieved them back ! Thanks to @JorgeB !!!!
  2. I have two 960GB SSDs assigned as one Cache Pool - BTRFS - Single Mode I wanted to remove one to be a separate Cache pool so I've stopped the array and unassigned the drive then started the array so the rebalance operation happens .. but instead I got unmountable: unsupported or no file system message on the remaining drive .. stopped the array again and put the drive back and now both giving the same message Tired these solutions and checks and nothing worked : remove them all then add them reboot btrfs check --force -s 1 /dev/sdc using SB copy 1, bytenr 67108864 Opening filesystem to check... No valid Btrfs found on /dev/sdc ERROR: cannot open file system btrfs check /dev/sdc Opening filesystem to check... No valid Btrfs found on /dev/sdc ERROR: cannot open file system btrfs rescue super-recover -v /dev/sdc No valid Btrfs found on /dev/sdc Usage or syntax errors mount -o rescue=all,ro /dev/sdc /temp mount: /temp: wrong fs type, bad option, bad superblock on /dev/sdc, missing codepage or helper program, or other error. dmesg(1) may have more information after failed mount system call. mount -o degraded,rescue=all,ro /dev/sdc /temp mount: /temp: wrong fs type, bad option, bad superblock on /dev/sdc, missing codepage or helper program, or other error. btrfs restore -v /dev/sdc /mnt/disk2/restore No valid Btrfs found on /dev/sdc Could not open root, trying backup super No valid Btrfs found on /dev/sdc Could not open root, trying backup super No valid Btrfs found on /dev/sdc Could not open root, trying backup super I've tried all the commands above also with the second drive (sdb) fdisk -l /dev/sdc \Disk /dev/sdc: 894.25 GiB, 960197124096 bytes, 1875385008 sectors Disk model: KINGSTON SA400S3 Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes fdisk -l /dev/sdb Disk /dev/sdb: 894.25 GiB, 960197124096 bytes, 1875385008 sectors Disk model: KINGSTON SA400S3 Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Screenshoot & diagnostics attached. Note : don't worry about the second drive SATA CRC error count that's because of a faultily SATA cable and now fixed. also the second drive is 24hrs old BTW. so it's new and working before removing it. warmind-diagnostics-20240320-0553.zip
  3. The Codec solution worked !!! Thanks for the suggestion !!! will update my original post for those who will face the same issue.
  4. Update : I think the GPU and the NVIDIA Driver aren't the issue .. because I tried to have a direct stream for Video but transcoded audio and same issue happened that means it's a CPU Transcoding issue because as far as I remember GPU can't do audio so only CPU transcode .. so I did turn off GPU transocoding and CPU only transcoding didn't work now I'm downgrading the container to see if it's a plex update issue .. so far I have reached caontainer version 1.32.8.7639-fb6452ebf-ls202 ( 4.116.1 inside plex server ) and still facing the same issue /////////////////// Update : Solution ( Shut down Plex then delete Codecs Folder from Plex then turn the container back on. )
  5. Update : So Plex is actually see GPU and can activate the transcoding process but GPU usage at 0-3% and nothing will stream this issue occurs only by using all clients + optimization except Plex HTPC on WINDOWS it works fine even from 4K to 720p !!!! here is an attachment of ios asking for transcoded session ... stays stuck like this. second one ( Friends ) nothing shows in the NVIDIA-SMI (NVTOP) ///////// Update : Solution ( Shut down Plex then delete Codecs Folder from Plex then turn the container back on. )
  6. Hi, Plex is not transcoding anymore .. same as the guy above I'm using latest Linuxserver container .. latest nvidia driver .. every used to work fine .. didn't change anything since a year except updating both also I can see the GPU in the Plex Console via "env" command tried to downgrade the GPU didn't work tried -gpus=all didn't work tried -gpus device=GPU-XXXXXXXXXXXXXXXXXXXXXXXXXX didn't work it seems latest plex update issue ? not sure Update : Solution ( Shut down Plex then delete Codecs Folder from Plex then turn the container back on. )
  7. Anyone knows how to enable mutli-thread downloading ? also if it's possible to enable multi file download in the same time ?
  8. I've fixed it !!!! Apparently everything I did is correct but I've forgot a missing step in my network setup. Three weeks ago I turned off DMZ for my router in my ISP modem and switched to open the important ports only that my server needs in the modem for the router and in the router for the server. I've forgot that so I forgot to open the port 8211 in my modem. now it's working with my domain too 😄 thanks for the amazing support you did in the past hours Also I would like to add that I've found a good way to test if the port open or not without the game. on the remote client computer run this command ( replace XXX.XXXX.XXX with your public IP ) netcat -u XXX.XXXX.XXX 8211 make sure the container is running then hit enter multiple times after this command and you will see the container responding with gibberish text. that means it's reachable.
  9. the container is updating the IP correctly. shows fine in the log. also the ini gets the updated ip too. and we tried to restart my modem 3 times and his also to get new public IPs and we tried all the 3 and still getting the same results and also yes just tried my public domain and we got the same message.
  10. Ok let's agree on these facts : 1- I'm not a beginner with Unraid / Reverse Proxy / Port forwarding / Basics and differences between local and public IPs and domains. 2- yes he is connecting via my public IP and port 8211 the loading screen starts for 10-15sec then we get the message in the attached screenshot 3- yes the port 8211 is open and only UDP . 4- I know about your seggestion of using my domain instead my public ip and that's the plan after I make sure that actually the public ip access is working which for now is not working .. 5- I have attached some screenshots to confirm and to give more details. 6- Yes the Palworld Server is working locally on my other gaming PCs via 192.168.1.181:8211 7- I removed the port forwarding of steam port from my router.
  11. yes I did .. and as I said ( Public IP) please read what I said.
  12. Hi I'm facing an issue by connecting to my Palword server remotely Connection type : Bridge 8211 UDP open and pointing to the server local ip 27015 TCP/UDP open and pointing to the server's local ip ( Reddit comment suggestion ) I can connect locally with a password but my friend is getting a "Connection Timed Out" Message when he tries to connect to my public ip. Modem restarted .. router restarted .. container restarted .... didn't work !!! My ISP is fine I can access other dockers via SWAG so this Palworld Server should be less complicated.
  13. Hotio Changed their repository & registry links again !!!! and now I can't updated their containers They have changed repository from cr.hotio.dev/hotio/radarr to ghcr.io/hotio/radarr is there any tutorial about how we can move to the new ones without ruining the current configurations ?
  14. Running `unraid-api restart` fixed it for me But the issue keeps coming back everyday.
  15. Just to clarify I wasn't attacking you personally for taking over this important plugin .. I totally support it and wish you a good luck fixing all the issues you are facing. But what annoyed me that I have a perfectly working plugin that I'm now forced ( maybe in the nearest future ) to delete it and install it again while I'm seeing people are facing so many issues with the new one. I don't know if its better or not but instead of forking it from Squid's why didn't you work on the same one with him? and save us all the Hussle