Ashe
-
Posts
515 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Ashe
-
-
Sorry I missed that. Looks like you’ve changed the name of your docker from the standard name
Use
docker exec -it icloudpd-JB sync-icloud.sh --Initialise
Sent from my iPhone using Tapatalk -
run the docker , drop to command line and type
docker exec -it icloudpd sync-icloud.sh --Initialise -
Did you reauthorise the keychain?
Sent from my iPhone using Tapatalk -
Looks fine, wait the 5 mins or restart
Sent from my iPhone using Tapatalk -
I just had a look as your post prompted me to check and mine was not working after the update.
If you edit the container via the unraid webgui, click show more settings just under the Time Zone variable and click remove for the keyring/password option and click apply.
I reauthorized the docker and entered the code via
Quotedocker exec -it icloudpd sync-icloud.sh --Initialise
then restarted but not sure if that needed to be done
but now it is working as normal
-
Remove the CPU heatsink. That large mass of metal will reek havoc if it gets loose. I've seen one total everything inside the case, no circuit board or connector was spared.
That's a good shout, I hadn't even thought about that
Sent from my iPhone using Tapatalk -
Ashe, I would remove the drives from the Fractal 804 and layer them surrounded by foam cut to size in a protective case like this one (or something similar):
Leaving them in the case is one thing I am doubting, I have looked at these cases before so I think you're right
Sent from my iPhone using Tapatalk -
We are relocating in around 2 months and sending our household goods ahead of us via seafreight including my unraid server.
Has anyone got any recommendations for packing/protecting the server?
So far I will remove any pci cards and usb sticks. I did consider removing the HDDS but they are firmly secured inside the server already. But if there is anything anybody else would recommend or has experienced, I would appreciate the advice.
Sent from my iPhone using Tapatalk
-
Just curious: I do understand the need for multiple array pools, but I don't have a clue what multiple cache pools are good for?
Not sure if I've understood it correctly, but I would like VM drives on a cache pool but not the same cache pool as my dockers to reduce wear and tear and risk failure plus I can buy lower sized SSDs for each task.
Sent from my iPhone using Tapatalk -
I think the only option is to manually clear the files and try again via the webgui
Sent from my iPhone using Tapatalk -
The telegram folder should have been created automatically when you set it up in the notification settings. Can you check if the is a Telegram folder under boot/config/plugins/dynamix/notifications?
Edit
/boot/config/plugins/dynamix/notifications/agents
This should have a Telegram.sh file in there
-
Hi,
in my /boot/config there's no telegram folder.
I made it nonetheless and did the chatid file inside with the group chat id (of course) but with no avail.
found this:
/boot/config/plugins/dynamix/telegram
Inside there's the chatid, with a 9 digits number.
The chatid for the group is a 9 digits too but with a "g" at the start (10 characters in total).
Modified with both the "g" and without, no results.
Any hints?
Thanks.
EDIT: solved by myself. It needs the "-" symbol before the number, something like:
-123456789
Cheers.
Glad it's working. My chat Id is in the config/telegram folder and works with just the number. But if it works it works
Sent from my iPhone using Tapatalk -
Hi,
in my /boot/config there's no telegram folder.
I made it nonetheless and did the chatid file inside with the group chat id (of course) but with no avail.
found this:
/boot/config/plugins/dynamix/telegram
Inside there's the chatid, with a 9 digits number.
The chatid for the group is a 9 digits too but with a "g" at the start (10 characters in total).
Modified with both the "g" and without, no results.
Any hints?
Thanks.
EDIT: solved by myself. It needs the "-" symbol before the number, something like:
-123456789
Cheers.
Glad it's working. My chat Id is in the config/telegram folder and works with just the number. But if it works it works
Sent from my iPhone using Tapatalk -
I'm sure the trailing Slash was there. Will try again and report back
Sent from my iPhone using Tapatalk
No, I stand corrected you were quite right, trailing Slash did work fine.
Sent from my iPhone using Tapatalk -
Make sure the path you’re typing contains a trailing slash. I’m going to change that requirement in a future release, but I didn’t change it yet for the beta.
Sent from my iPhone using Tapatalk
I'm sure the trailing Slash was there. Will try again and report back
Sent from my iPhone using Tapatalk-
1
-
-
You should be able to manually type any path that starts with /mnt/ even though the drop down list only shows shares.
I tried manually typing the path but without changing the mode and it would not allow. Will try again. Thanks
Sent from my iPhone using Tapatalk -
Works very well so far, well done. One request would be to allow unassigned devices to be used as the backup location, it only allows unraid shares at the moment.
Sent from my iPhone using Tapatalk-
1
-
-
cd /boot/config/telegram
Nano chatid
Add chatid number to file
Ctrl-x
Save
Sent from my iPhone using Tapatalk-
1
-
-
Well I am not sure why but after throwing my hands in the air and leaving it alone for a day, notifications starting coming in on my UnRAID notification bot.
Now if I press the test button I get an instant message on telegram bot, yay But odd cause I didn't change anything just took a day to start working.
Only thing I can't get sorted is how to get unRAID bot to post in my custom telegram channel I have that all the other bots for various dockers and other stuff post in to keep telegram cleaner. In Radarr docker for instance I can add the chat ID of my Notification channel into a field beside my bots API key and then they post in my unified notification channel instead of each bot posting in their own thread.
I think you are supposed to be able to enter
'apikey:chatid' and it should work
However I just created a file called 'chatid' and entered the number in there
Sent from my iPhone using Tapatalk-
1
-
-
Will an Arm version of unraid be released? With the increased power of the raspberry pi 4 this would be a perfect small fileserver with dockers
-
1
-
-
Yeah figured it out.
I'm on 6.7 and it wasn't working for me at all.
I had to create a chatid file and once I did the test was successful.
Prior to that it went nowhere with just the BOT token.
My test server is still on RC, will update to 6.7 and see whether that works without chatid
Sent from my iPhone using Tapatalk -
It's not working for me at all, chatid file is not being created. Do I just create a chatid file in the same directory as the tokenid file, and paste the chatid in there?
Yes, it's as simple as that. Would note after upgrading my main server to 6.7, it worked without chatid
Sent from my iPhone using Tapatalk -
Question: After this container converts a file, does it delete the original? Or will I have two copies in my library after the conversion is done? Thanks!
It deletes the original
Sent from my iPhone using Tapatalk-
1
-
-
Yes they have been merged. Please test and verify correct functionality.
Also, we received this on our twitter feed:
"I think the Telegram Support in 6.7.0+ is a bit weird. I would prefer to enter a ChatID and Token, instead that it keeps reading the /getUpdates chat IDs"
Any merit to this?
Tested under RC3, same problem as before.
There is no option to add the chatid therefore a chatid file is not created in the config just the tokenid. If I manually create a chatid file it works.
Far easier to have a chatid entry line in my opinion
Sent from my iPhone using Tapatalk
icloudPD - update and i can't fix it
in Lounge
Posted
Looks the same as mine. I shut it down and restarted at that point and it was then syncing
Sent from my iPhone using Tapatalk