Ashe

Just check the cache section, I've labelled it cache Have you got anything else running on 8888 already? Sent from my iPhone using Tapatalk

Not sure if this is 100% correct but working for GUI Sent from my iPhone using Tapatalk

Your last parity sync was 2 days ago Sent from my iPhone using Tapatalk

Only got 4 so just 2 pinned. It's a bit slow but doesn't affect my system too much Sent from my iPhone using Tapatalk

This is a fantastic container and is exactly what i have been looking for to convert my library. I cannot believe the size difference between h.264 and h.265, at the moment my files are a third of the size. I think any feature ideas are already included on GitHub already, the run schedule is great for running over night assuming it can suspend/resume conversions, selection of encoding options for compatibility of players without transcoding which would be easiest via a simple gui and multiple media library paths would cover it for me. i currently have cpu pinning for this docker. Thank you @SpaceInvaderOne for the videos, i had set off down that route previously and the videos definitely helped. great work @Josh.5

Does anyone use the mp4 automated script in Sonarr? And if so, would they mind running me through it? I’ve tried searching the forums but found little about it

Here’s my APCSmart settings if that’s any help. I am strangely not getting the nominal load at the moment although normally I do

Hi Peter Just a heads up that iOS seems to prefer a *.ovpn12 file now rather than the *.p12 file. No problem with renaming the generated *.p12 file and it then imports fine Sent from my iPhone using Tapatalk

I’ve got dockers and vms showing after updating the app on iOS

On 6.5 and using https.... If you access the plugin when you’ve used redirect (http://) and you get redirected to https://xxx.unraid.net and access the plugin GUI it shows the list of users If you access the plugin using https://ipaddress and access the plugin GUI it shows no users and recommends adding via the unraid GUI Not sure if this is the issue for the no show of dockers but hope it helps

Assuming you have the controlr plugin for unraid, I would restart it first then restart the controlr app https://lime-technology.com/forums/topic/51332-plugin-controlr/?do=embed

Perfect

Yes basic stats on UDs would be more than fine for now. I remember it being mentioned that LT would take it on board but I think it’s quite a lot to be worked in. Thanks

Hi@jbrodriguez When do you think you will be able to show the status of the cache drive and unassigned devices on the Disks page? That’s the last major necessity for me

Hi@jbrodriguez, just noticed that the ops page does not update the duration timing of a parity check. It keeps all other information updated. As you can see the elapsed time still displays less than a minute Sent from my iPhone using Tapatalk

Thanks@archedraft that worked perfectly. Fully up and running now

Thanks for the re-edited video on High Sierra, I have got as far as the boot clover manager but for some strange reason I can’t get the delete key to work getting into the device manager when restarting clover, has anyone come across this? The resolution is unusable when installing HS so I need to change it to match

Working great with APC on iPhone, great work!

root@MediaOne:~# /sbin/apcaccessAPC : 001,048,1105DATE : 2017-10-10 15:20:45 +0400HOSTNAME : MediaOneVERSION : 3.14.14 (31 May 2016) slackwareUPSNAME : UPS_IDENCABLE : Custom Cable SmartDRIVER : APC Smart UPS (any)UPSMODE : Stand AloneSTARTTIME: 2017-10-07 09:37:15 +0400MODEL : Smart-UPS SC1500STATUS : ONLINELINEV : 228.0 VoltsLOADPCT : 9.1 PercentBCHARGE : 100.0 PercentTIMELEFT : 85.0 MinutesMBATTCHG : 10 PercentMINTIMEL : 10 MinutesMAXTIME : 0 SecondsMAXLINEV : 228.0 VoltsMINLINEV : 226.0 VoltsOUTPUTV : 228.0 VoltsSENSE : HighDWAKE : 0 SecondsDSHUTD : 60 SecondsDLOWBATT : 2 MinutesLOTRANS : 208.0 VoltsHITRANS : 253.0 VoltsRETPCT : 0.0 PercentALARMDEL : 5 SecondsBATTV : 26.8 VoltsLINEFREQ : 50.0 HzLASTXFER : Line voltage notch or spikeNUMXFERS : 0TONBATT : 0 SecondsCUMONBATT: 0 SecondsXOFFBATT : N/ASELFTEST : NOSTESTI : 336STATFLAG : 0x05000008REG1 : 0x00REG2 : 0x00REG3 : 0x00MANDATE : 04/16/12SERIALNO : 5S1216T00762BATTDATE : 04/16/12NOMOUTV : 230 VoltsNOMBATTV : 24.0 VoltsFIRMWARE : 738.3.IEND APC : 2017-10-10 15:20:51 +0400

Confirmed as fixed, thanks! Another item I have noticed is in the VM tab if you try to destroy a VM, it responds with “unknown action ‘domain_destroy’ “

Exactly the same here, the first run through of clicking tabs from left to right is very smooth, after that it’s the same behaviour

Is /var/log/docker.log non-empty ? Yes it is empty.

Great work! On mine, It has fixed the VM log but not the docker log and switching between the docker and VM main tabs takes a double tap otherwise it just refreshes the current tab, only if you are on the docker or VM tabs already. All other items are fixed.

If Ii

Correct