Ashe

Yes basic stats on UDs would be more than fine for now. I remember it being mentioned that LT would take it on board but I think it’s quite a lot to be worked in. Thanks

Hi@jbrodriguez When do you think you will be able to show the status of the cache drive and unassigned devices on the Disks page? That’s the last major necessity for me

I’ve used the scatter element when adding 8TB drives to my array for moving data off several 3TB drives so that I can later remove the empty 3TBs from the array. I haven’t used the gather yet, but through lack of planning my music folder is spread across multiple disks and I would like it to be on one disk only so that only one disk is spun up when using the music folder Sent from my iPhone using Tapatalk

Hi@jbrodriguez, just noticed that the ops page does not update the duration timing of a parity check. It keeps all other information updated. As you can see the elapsed time still displays less than a minute Sent from my iPhone using Tapatalk

Thanks@archedraft that worked perfectly. Fully up and running now

Thanks for the re-edited video on High Sierra, I have got as far as the boot clover manager but for some strange reason I can’t get the delete key to work getting into the device manager when restarting clover, has anyone come across this? The resolution is unusable when installing HS so I need to change it to match

Working great with APC on iPhone, great work!

root@MediaOne:~# /sbin/apcaccessAPC : 001,048,1105DATE : 2017-10-10 15:20:45 +0400HOSTNAME : MediaOneVERSION : 3.14.14 (31 May 2016) slackwareUPSNAME : UPS_IDENCABLE : Custom Cable SmartDRIVER : APC Smart UPS (any)UPSMODE : Stand AloneSTARTTIME: 2017-10-07 09:37:15 +0400MODEL : Smart-UPS SC1500STATUS : ONLINELINEV : 228.0 VoltsLOADPCT : 9.1 PercentBCHARGE : 100.0 PercentTIMELEFT : 85.0 MinutesMBATTCHG : 10 PercentMINTIMEL : 10 MinutesMAXTIME : 0 SecondsMAXLINEV : 228.0 VoltsMINLINEV : 226.0 VoltsOUTPUTV : 228.0 VoltsSENSE : HighDWAKE : 0 SecondsDSHUTD : 60 SecondsDLOWBATT : 2 MinutesLOTRANS : 208.0 VoltsHITRANS : 253.0 VoltsRETPCT : 0.0 PercentALARMDEL : 5 SecondsBATTV : 26.8 VoltsLINEFREQ : 50.0 HzLASTXFER : Line voltage notch or spikeNUMXFERS : 0TONBATT : 0 SecondsCUMONBATT: 0 SecondsXOFFBATT : N/ASELFTEST : NOSTESTI : 336STATFLAG : 0x05000008REG1 : 0x00REG2 : 0x00REG3 : 0x00MANDATE : 04/16/12SERIALNO : 5S1216T00762BATTDATE : 04/16/12NOMOUTV : 230 VoltsNOMBATTV : 24.0 VoltsFIRMWARE : 738.3.IEND APC : 2017-10-10 15:20:51 +0400

Confirmed as fixed, thanks! Another item I have noticed is in the VM tab if you try to destroy a VM, it responds with “unknown action ‘domain_destroy’ “

Exactly the same here, the first run through of clicking tabs from left to right is very smooth, after that it’s the same behaviour

Is /var/log/docker.log non-empty ? Yes it is empty.

Great work! On mine, It has fixed the VM log but not the docker log and switching between the docker and VM main tabs takes a double tap otherwise it just refreshes the current tab, only if you are on the docker or VM tabs already. All other items are fixed.

If Ii

Correct

I'm not sure how helpful this will be but here it is, the issue seems to be more so on the VM tab not the log tab, however logs is still only showing the system log, not VM or docker.

Fixed both on mine, thanks

I think the log was reporting a latency figure, I will rerun it later and pm you the onscreen log

After a restart it is acting as normal! Perhaps an 11.01 quirk

Using rc9f Works with the above quite smoothly for VM and dockers, when it comes to the logs there is severe lag in reporting anything and stays on “refreshing” for quite a while. The system log eventually shows up, but even with clicking on the vm and docker log it still shows the system log. Going back to any other menu heading results in “refreshing” but gets there eventually.

11.01 for iOS Server works absolutely fine apart from docker, logs and VMs so it seems it’s not communicating with the plugin. There is also a minor visual issue with the rotating banner for the mb/cpu temps that goes right to left then bounces and goes left to right.

No setting change still results in a forced quit

Same here on iOS, although third attempt added the server. Any setting change results in the app quitting however the setting is saved.

Hi Peter, Recently my ISP has appeared to block port 1194 so I have switched to 443 and subsequently re-configured the server and raised new clients for iOS and windows. on connection from iOS I am getting a transport paused message which then leads to a NETWORK_EOF_ERROR / TRANSPORT_ERROR, all configurations server and client are identical to my previous setup. Have you come across this before? iOS connection log W10 Connection Log

Yes that's fixed it for me to a single load, thanks

I've just noticed on both iOS and android that sometimes it shows the board temp and then it disappears EDIT: it does come back on its own so maybe just communication with the sensor to the app